Specifications

English
EN 67
Adjust settings
Audio settings
Analogue tuner
Digital tuner
Setup
HDMI audio
Audio output
Digital input
Night mode
Sound mode
Language
Recording
Playback
Video output
Audio
1 Press OPTIONS.
2 Select [ Settings ] > [ Audio ], then press
B.
3 Select an option, then press B.
[ Audio output ]
When you connect a digital audio device
through the COAXIAL/OPTICAL OUT
socket, select an output format that
matches its capabilities.
[ All ] – the device supports multi-
channel audio formats.
[ PCM only ] – the device does not
support multi-channel formats. Multi-
channel audio will be converted to
PCM (Pulse Code Modulation) format.
[ HDMI audio ]
When you connect a HDMI or DVI TV
through the HDMI OUT socket, select the
audio output setting.
[ Auto ] – automatically select the best
supported audio output format.
[ Disable ] – disable HDMI audio
output. In this case, an alternative audio
connection is required from the
recorder to your TV.
•
•
•
•
[ Digital input ]
When you connect the digital audio output
from your Cable Box/Satellite Receiver to
the COAXIAL DIGITAL IN socket, select
the audio input setting.
[ Off ] – disable digital audio input.
Only stereo audio format will be
recorded.
[ On ] – enable digital audio input.
When you make a recording from this
device, the 5.1 multi-channel audio will
be recorded, along with the video.
[ Sound mode ]
When you connect an audio device
through the AUDIO OUT socket, select
an output format that matches it
capabilities.
[ Stereo ] – the divide supports only
left and right audio channels. Select this
setting when a TV or stereo system is
connected.
[ Surround ] – the device supports
Dolby Surround. Dolby Digital and
MPEG-2 multi-channel audio are
converted to two-channel output that is
compatible with Dolby Surround.
[ Night mode ]
Make loud noise softer and soft noise
louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
[ On ] – for quiet viewing at night
(DVDs only).
[ Off ] – enjoy surround sound with a
full dynamic range.
4 Select a setting, then press OK.
To return to the previous menu, press
BACK 2.
To exit the menu, press OPTIONS.
•
•
•
•
•
•
•
•