Specifications

English
EN 23
Get started
Turn on Progressive Scan
When you connect a TV with the component
video connection (see ‘Connect audio/video
cables - Option 3: Connect to component
video socket’ for details), you can set the
progressive scan output if your TV supports
progressive scan.
1 Turn on the TV to the correct viewing
channel for this recorder.
Ensure that the progressive scan mode
on your TV is turned off or set it to
‘Interlaced’ mode (see the TV user
manual).
2 Turn on the recorder and press
OPTIONS.
Reset TSB
Time search
Audio language
Subtitle language
Settings
3 Select [ Settings ] > [ Video output ]
,
then
press B.
4 Select [ Active video output ] > [ Comp.
video (YUV) ]
,
then press OK.
Playback
Language
Recording
Audio
Analogue tuner
Digital tuner
Setup
HDMI
Video format
TV shape
Active video output
Black level
Vertical
Video Output
This is to activate the video output for
component video connection.
•
•
5 Select [ Video format ] > [ Progressive ],
then press OK.
Playback
Language
Recording
Audio
Analogue tuner
Digital tuner
Setup
HDMI
Video format
TV shape
Active video output
Black level
Vertical
Video Output
This is to activate the progressive scan
mode.
6
Read the warning message on the TV. To
proceed, select [ Apply ] in the menu and
press OK.
 The progressive setup is complete.
If a blank/distorted screen is displayed,
wait for 15 seconds for the auto
recover.
If no picture is displayed, disconnect this
unit’s ~MAINS. Then press and hold
. on the recorder whilst connecting
its ~MAINS to the power supply.
7 To exit the menu, press OPTIONS.
8 You can now turn on the progressive scan
mode on your TV (see the TV user
manual).
Note
There are some progressive scan TVs that are
not fully compatible with this unit, resulting in an
unnatural picture when playing back a DVD VIDEO
disc in the progressive scan mode. In such case, turn
off the progressive scan feature on both the recorder
and your TV.
•
•
•
•