Specifications

22 EN
No TV install
Only Digital TV
Channel Search
Full installation
Automatic Channel search
will find and store all
channels. Make sure to
connect the antenna!
Only Analogue TV
StartPrevious
6 Select the type of TV signal source to
install, then press the OK.
 Channel search and install begin. It takes
a few minutes to complete.
Digital channel search
Searching channels.
This may take a few minutes. Please wait.
Digital TV channels found: 3
Next
Digital channel search completed
Digital TV channels found: 9
Digital Radio channels found: 3
Restart ChkSignal
Digital channel search
If [ No TV install ] is selected, you will
not be able to record TV programme
through this recorder.
7 After the channel search is complete, press
the Green button [ Next ] to continue.
 [ Time ] menu is displayed.
Time
Time setting is required for
making recordings.
NextPrevious
00 00 AM
Enter time (hh.mm)
•
8 Press ST (or the alphanumeric buttons)
to input the correct time, then press OK.
 [ Date ] menu is displayed.
Date
Date setting is required to
make recordings. Please
make sure it is correct.
NextPrevious
31 01 2007
Enter date (dd.mm.yyyy)
9 Press ST (or the alphanumeric buttons)
to input the correct date, then press OK.
10 The installation is now complete. Press the
Green button [ Done ] on the remote
control to close the menu.
Installation Complete
DonePrevious
You have successfully completed the installation
of your recorder.
System is now ready for use.
The DVD recorder is now ready for use.
Tip
Press the Red button on the remote control to
return to the previous screen or press the Green
button to proceed to the next installation step.
•