Specifications

18 EN
Connect to VCR or other similar
device
HDMI
OUT
S-VIDEO
OUT
AUDI O
OUT
COAXIAL
DIGITAL OUT
COMPONENT
VIDEO OUT
COAXIAL
DIGITAL
IN
CVBS-OUT
P
B
P
R
Y
R
L
TO VCR/SAT
EXT2
EXT1
DIGITAL
ANTENNA INPUT
DIGITAL ANTENNA
LOOP THROUGH
N
NA INTERCONNECT CABLE
O
NAL, REFER TO MANUAL)
VHF/UHF
RF IN
VHF/UHF
RF OUT
VIDEO OUT
S-VIDEO OUT
AUDIO
OUT
1 Plug in the scart adaptor (supplied) to the
EXT2-TO VCR/SAT socket on this
recorder.
2 Connect the Audio/Video cables (supplied)
to the scart adaptor and the other ends to
the audio and video input sockets on your
VCR.
Alternatively, you may replace the video
connection with S-VIDEO (cable not
supplied).
To view the video input, press CAM
followed by P +/- repeatedly until
‘EXT 2’ is displayed.
Note
Your new recorder can replace the VCR for all your
recording needs. Just unplug all the connections to
your VCR.
Most commercial video tapes and DVDs are copy-
protected and therefore cannot be recorded.
•
•
•
•
Connect to digital video/digital 8
camcorder
1 Flip down the cover at the right hand
corner of this recorder.
2 Connect an i.LINK 4-pin cable (not
supplied) from the DV IN socket on this
recorder to the DV OUT socket on the
camcorder.
To view the video input, press CAM to
select ‘CAM2’.
Note
It is not possible to record or copy the titles or fi les
from this recorder to your camcorder.
•
Tip
This type of connections provide best picture quality.•
•