Specifications

English
EN 17
Connect
Connect other devices
This section describes how to connect this
recorder to other devices with
recommendations for the most used cases.
Other solutions may be possible, depending on
the capabilities of the devices.
Connect to an AV amplifi er/receiver
You can listen to the audio from this recorder
through a digital audio device. It allows you to
enjoy multichannel surround sound output.
HDMI
OUT
S-VIDEO
OUT
AUDI O
OUT
COAXIAL
DIGITAL OUT
COMPONENT
VIDEO OUT
COAXIAL
DIGITAL
IN
CVBS-OUT
P
B
P
R
Y
R
L
TO VCR/SAT
EXT2
TO TV
EXT1
DIGITAL
ANTENNA INPUT
DIGITAL ANTENNA
LOOP THROUGH
ANTENNA INTERCONNECT CABLE
(OPTIONAL, REFER TO MANUAL)
1 Connect a coaxial cable (not supplied)
from the COAXIAL DIGITAL OUT
socket on this recorder to the digital/
coaxial input socket on the device.
Select the digital audio output setting
according to the type of audio that the
device can output (see ‘Audio settings’
> [ Digital input ] for details).
Tip
The digital coaxial input socket on the device may be
labelled as COAXIAL IN or DIGITAL IN.
•
•
Connect to Cable Box/Satellite
Receiver
This recorder supports 5.1 multi-channel input
signal. The 5.1 multi-channel surround output
from the Cable Box/Satellite Receiver can be
recorded onto this recorder, along with the
video.
HDMI
OUT
S-VIDEO
OUT
AUDIO
OUT
COAXIAL
DIGITAL OUT
COMPONENT
VIDEO OUT
COAXIAL
DIGITAL
IN
CVBS-OUT
P
B
P
R
Y
R
L
TO VCR/SAT
EXT2
TO TV
EXT1
ANALOG
ANTENNA INPUT
DIGITAL
ANTENNA INPUT
DIGITAL ANTENNA
LOOP THROUGH
ANTENNA INTERCONNECT CABLE
(OPTIONAL, REFER TO MANUAL)
COMPONENT
VIDEO OUT
P
B
P
R
Y
VIDEO OUT
AUDIO OUT
S-VIDEO OUT
COAXIAL
DIGITAL OUT
OPTICAL
OUT
1 Plug in the scart adaptor (supplied) to the
EXT2-TO VCR/SAT socket on this
recorder.
2 Connect the Audio/Video cables (supplied)
to the scart adaptor and the other ends to
the audio and video output sockets on
your Cable Box/Satellite Receiver.
3 Connect a coaxial cable (not supplied)
from the COAXIAL DIGITAL IN socket
on this recorder to the digital/coaxial
output socket on your Cable Box/Satellite
Receiver.
To prepare this recorder for 5.1 multi-
channel recording (see ‘Set up 5.1
multi-channel recording’ for details).
To view the video input, press CAM
and followed by P +/- until ‘EXT 2’
is displayed.
•
•