User Guide

English
79
Problem (USB/HDMI) Solution
The contents of the USB  ash
drive cannot be read.
Slow operation of the USB
 ash drive.
No audio output from HDMI
connection.
No video output from HDMI
connection.
– The USB  ash drive format is not compatible with the
system.
– Drive is formatted with a different  le system which is
not supported by this DVD system (e.g., NTFS).
– Large  le size or high memory USB  ash drive takes
longer time to read and display on the TV.
– You will not hear any sound from the HDMI output if
the source device is only DVI/HDCP (High-bandwidth
Digital Content Protection)-compatible.
– It is not possible to output SACD or copy-controlled
DVD-Audio sources from the HDMI connection.
– Ensure that you have selected a suitable audio output
setting. Read chapter “System Menu Options - Audio
output settings – { HDMI Audio }” for details.
– Ensure that you have activated this recorder as the
HDMI input in the settings for the device you are
using. Press HOME on the remote control, select
{ Settings } and then select { Video output Settings }.
Ensure { Active video output } is set to { HDMI
output }.
– HDMI connection can only be made to HDMI-
equipped devices with HDCP (High Bandwidth Digital
Content Protection). If you wish to connect to a DVI
connector (equipped with HDCP), you will need a
separate adaptor (DVI to HDMI).
– When connecting to a non-HDCP compliant TV, the
HDCP warning message will appear only on the
analogue video output.
– When the HDMI and component video are used to
connect to a TV at the same time, it can be no picture
output from the component video connection.
Disconnect the HDMI cable.
Troubleshooting (continued)
dvdr5500-05n31_eng_25722.indd 79dvdr5500-05n31_eng_25722.indd 79 2007-05-30 10:04:05 AM2007-05-30 10:04:05 AM