User Guide

English
66
System Menu Options (continued)
Manual install: Use this setting only if the automatic install detected the wrong
tuner signals.
{ Finetune } – Use  keys to adjust the frequency of the
TV channel if the reception is poor and press
OK to con rm.
{ NICAM } – NICAM is a digital transmission system. It
can transmit either one stereo channel or
two separate mono channels. Select { On }
to improve the sound transmission or { Off }
if the reception is poor.
Digital Install
Activates digital TV/radio channels search and install, adds new
broadcast channels or checks the transmission signal strength.
Full: Press OK to start digital channels search and install.
It will replace all previously stored digital TV/radio channels.
Once complete, press OK to exit.
Update: Press OK to start new channels search and install.
This adds only the new channels to your existing preset list, after
the last free preset position. New channels refer to the channels
that are currently not installed. Once complete, press OK to
exit.
Check Signal: Press OK to display signal strength and quality information of the
digital tuner. It will help to  nd the best position of antenna.
Use   keys to change the frequency or channel number and
press OK to check the signal quality. Position the antenna at the
area where the maximum signal quality is reached.
Tuner settings
dvdr5500-05n31_eng_25722.indd 66dvdr5500-05n31_eng_25722.indd 66 2007-05-30 10:04:04 AM2007-05-30 10:04:04 AM