User Guide

English
36
Record TV Programmes (continued)
{ Repeat }
Select a desired repeat recording setting
(Once, Daily, Weekly, Mon~Fri).
{ Record mode }
Select the recording mode. See the
chapter “Recording – Record settings -
{ Record Mode }” for more information.
{ VPS/PDC }
Turn on or off the VPS/PDC setting.
F Select the entry  eld and press .
G Use  keys or the alphanumeric
keypad 0-9 to select or enter the
recording information, then press OK to
con rm.
H Once complete, press the Green button
for { Store }.
I To exit, press HOME.
 The ‘TIMER’ icon will light up on the
display panel if a timer recording is set.
 If the recorder is not in standby mode,
a noti cation message will appear before
the timer recording begins.
 If you ignore the warning, the
recorder will automatically switch to the
respective channel and start recording
Timer recording - SHOWVIEW
®
System
This is a simple timer programming
system. To use, enter the S
HOWVIEW
®
programming number associated with
your television programme. You can  nd
this number in your TV listings magazine
or TV Guide menu.
All the information needed by this
recorder for programming is contained in
the programming number.
A Turn on the TV to the correct viewing
channel for the recorder.
B Press SHOWVIEW on the remote
control.
Cancel Next Reset
ShowView System
Enter the ShowView program number
C Use  keys or the alphanumeric
keypad 0-9 to enter the SHOWVIEW
®
programming number for the show you
wish to record and press OK. (e.g., :
5-312-4 or 5,312 4, key in ‘53124’).

To cancel the S
HOWVIEW
®
programming
number, press the Red button on the
remote control.
D To con rm your entry, press OK on the
remote control.
Cancel Reset Store
01 01 2007
Date
Start time
10:30
Stop time 11:30
A001
Channel
Title name
Repeat
Record mode
Prog1
Once
SPP
On
VPS/PDC
dvdr5500-05n31_eng_25722.indd 36dvdr5500-05n31_eng_25722.indd 36 2007-05-30 10:03:55 AM2007-05-30 10:03:55 AM