User Guide

English
25
Step 3: Installation and Set-up (continued)
E
The Channel Search screen appears on
the TV. Press OK to start auto channel
search.
 The recorder will start the analogue
channel search, followed by digital
channel search (TV and radio).
Channel Search
Start Auto search
Previous Skip
Auto channel search installs
Analog and Digital channels.
Antenna needs to be
connected.
Note: Ensure that you have successfully made
all required connections to this recorder, the
TV and Satellite Receiver/Cable Box (if any)
and turned them on. The channel search will
detect the signals and save all the available
programme channels.
Analogue Channel Search
Searching channels.
This may take a few minutes. Please wait
Analogue TV channels found: 03
Channel search completed.
Analogue TV channels found: 07
F After the channel search is  nished, the
number of found and stored channels
appears (analogue TV, digital TV and
digital radio). Press OK to continue.
G The Time entry screen appears. Use the
alphanumeric keypad 0-9 or 
keys to enter the correct time, then
press OK to con rm.
Previous Next
Time setting is required for
making recordings. Time
format is 24h (hh:mm)
Time
00 00
:
H The Date entry screen appears. Use the
alphanumeric keypad 0-9 or 
keys to enter the correct date, then
press OK to con rm.
Previous Next
Date setting is required for
making recordings. Please
make sure it is correct.
Date
01
01
2007
I The installation is now completed. Press
OK on the remote control to exit the
screen.
Previous Done
You have successfully completed the installation
of your recorder.
System is now ready for use.
Installation Complete
The DVD recorder is now ready for
use.
dvdr5500-05n31_eng_25722.indd 25dvdr5500-05n31_eng_25722.indd 25 2007-05-30 10:03:49 AM2007-05-30 10:03:49 AM