User Guide

English
15
HDMI OUT
AUDIO OUTVIDEO OUT
R
L
IN
ANTENNA
TO TV
TO TV
EXT1
TO VCR/SAT
EXT2
VIDEO
(CVBS)
S-VIDEO
(Y/C)
Y
P
B
P R
COMPONENT
VIDEO OUT
COAXIAL
(DIGITAL OUT)
S-VIDEO IN
TV
Step 1: Basic Recorder Connections
Connecting the antenna
cables
These connections enable you to watch
and record TV programmes using this
recorder. If the antenna signal is
connected via a Cable Box or Satellite
Receiver, ensure that these devices are
turned on in order to watch or record
the cable programmes.
This recorder is equipped with a hybrid
analogue-digital tuner for TV reception.
You can connect your indoor digital
terrestrial antenna to receive digital TV
broadcast.

If you want to connect to a VCR
and/or a separate Cable Box/
Satellite Receiver, read chapter “Step
2: Optional Connections” for details.
A Connect the existing Antenna/ Cable TV
signal (or from the Cable Box/Satellite
Receiver {RF OUT or TO TV}) to the
ANTENNA-IN socket on the
recorder.
B Connect the supplied RF antenna cable
from the ANTENNA TO TV
socket on the recorder to the antenna
input socket (or labelled as VHF/UHF RF
IN) on your TV.
Helpful Hint:
– Depending on how you have currently
connected your TV channel (directly from an
off-air antenna or cable box or VCR), you’ll
have to disconnect some of the cables before
you make the antenna connection.
Cable Satellite Antenna
dvdr5500-05n31_eng_25722.indd 15dvdr5500-05n31_eng_25722.indd 15 2007-05-30 10:03:46 AM2007-05-30 10:03:46 AM