Software Upgrade

Philips Consumer Electronics
Confirm successful upgrade
1. Press <STANDBY> key to wake up the set.
2. Press <HOME> and navigate to “Settings” -> “SETUP” -> “Version Info”.
3. You should see the following screen. Confirm that your current recorder firmware version is
112.00.
Your product is successfully upgraded!
Note: If you do not see any of the above figures, please use the same upgrade disc
and repeat
Step 3, or Step 5.
Upgrading the firmware of your recorder (USB)
Note: Do not press any buttons or interrupt the mains supply during the upgrading process,
otherwise the recorder may become defective.
1. Extract the firmware upgrade files from the ZIP archive:
bal.bin
main.bin
upg.bin
Philips_5105.cvt
(Do not rename the filenames)
Note: Please check to ensure that your USB storage device can be detected by the
recorder before trying to upgrade the firmware using this method. If the USB storage
Step 4
Firmware version
Step 5