Specifications

60 EN
10 Troubleshooting
Warning!
Risk of electric shock. Never remove the casing of
this recorder.
•
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this recorder, check the following
points before requesting service. If the problem remains unsolved,
register your product and get support at www.philips.com/welcome.
Main Unit
No power.
Press 2 (Standby-On) button on the front of the recorder to
turn on the system.
Ensure that the AC outlet has power.
•
•
Remote control does not
work.
Aim the remote control directly at the sensor on the front of
the recorder (not towards TV).
Remove any obstacles between the recorder and the remote
control.
Batteries are weak. Replace the batteries.
•
•
•
No TV signal is received. Check the connection to the antenna or cable TV signal.
Manually tune and store the TV channel. See chapter ‘Adjust
Settings – Tune/ Modify a channel manually’.
•
•
Cannot eject tray. Exit from any on-screen menu.
Press x to stop play or recording, then press ç.
•
•
1_dvdr3600_97_UM_En_29031.indd 601_dvdr3600_97_UM_En_29031.indd 60 2008-02-15 4:18:57 PM2008-02-15 4:18:57 PM