Specifications

44 EN
Enable NICAM sound
NICAM is a digital sound transmission system. It
transmits either one stereo channel or two
separate mono channels.
1 Press SETUP.
2 Select [ Tuner ] > [ Manage Presets ],
then press OK.
3 Select a channel, then press W.
4 Select [ NICAM ], then press OK
repeatedly to toggle between:
[ On ]
Enable NICAM mode.
[ Off ]
Disable NICAM mode.
5 To exit, press SETUP.
Rename a channel
1 Press SETUP.
2 Select [ Tuner ] > [ Manage Presets ],
then press OK.
3 Select a channel, then press W.
4 Select [ Rename ], then press OK.
The keyboard screen is displayed.

5 Select the key to enter, then press OK.
Use the following options to edit.
Option Action
[ Space ] Insert a space between the
characters.
⌫
Remove the character to the
left of the cursor.
[ Confi rm ] Confi rm all changes and exit
the keyboard screen.
Use WXST keys to highlight the
respective option.
Press í
or ë repeatedly to toggle
between upper, lower case characters
or symbols.
To cancel the changes, press BACK.
6 To confi rm, select [ Confi rm ] and press
OK.
Re-install all channels
Note
All channels stored on the recorder will be reset.•
1 Press SETUP.
2 Select [ Tuner ] > [ Auto Search ], then
press OK.
Channel tuning begins.
To cancel during channel tuning, press
OK.
3 To exit, press SETUP.
•
•
•
•

•
1_dvdr3600_97_UM_En_29031.indd 441_dvdr3600_97_UM_En_29031.indd 44 2008-02-15 4:18:55 PM2008-02-15 4:18:55 PM