Specifications

English
32
Record TV Programme (continued)
About timer recording
Use the timer recording to automatically
start and stop a recording at a later date/
time. This recorder tunes to the right
programme channel and begins recording
at the speci ed time.
With this recorder, you can schedule up
to 40 recordings at a time and up to 6
(six) hours for each recording. During
timer recording, changing the recorder’s
channel is not possible.
Note: If the scheduled timer recording
is longer than 6 (six) hours, it splits into
two or more titles.
There are two ways to program a
timer recording
– Using the G-
CODE system
– Using manual timer programming
SUBTITLE
INFO SELECT EDIT
AUDIO
PAUSE LIVE TV
G-CODE
TIMER
OK
G-
CODE
Timer recording (G-CODE
system)
This is a simple timer programming
system. To use it, enter the G-
CODE
programme numbers associated with
your television programme. You can  nd
this number in your TV listings magazine.
A Turn on the TV to the correct viewing
channel for the recorder.
B Press G-CODE on the remote control.
 The G-CODE entry menu appears.
G-CODE System
Enter G-
CODE number :
Clear Store
Cancel
C Use the alphanumeric keypad 0-9 to
enter the G-CODE programme numbers
(e.g. 5-312-4 or 5,312 4, key in ‘53124’).

To clear the programme number, press
the Red button for { Clear }.

To cancel the programming and exit the
menu, press the Yellow button for
{ Cancel }.
D To con rm your entry, press the Green
button for { Store }.
 A message to enter channel list
appears.