DVDR3575H/37 Connections User Manual ARRÊ T ALTO Basic Setup STOP Introduction HDD & DVD PLAYER / RECORDER WITH DIGITAL TUNER Recording Playback Editing Function Setup Others E2H40UD.
PRECAUTIONS Return your Product Registration Card or register online at www.philips.com/welcome today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.
PRECAUTIONS Read before operating equipment Editing Function Setup Example of Antenna Grounding as per NEC - National Electric Code GROUND CLAMP Playback Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
PRECAUTIONS Welcome! This product lets you record on HDD/DVD and play back DVD/CD of various kinds. Read this user manual carefully to learn how to use the features described in this manual. Safety Precautions Warning: To prevent fire or shock hazard, do not expose this device to rain or moisture. Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this device void the user’s authority to operate it. • Do not stand the unit up vertically.
PRECAUTIONS HDD handling Supplied Accessories user manual quick start guide RCA audio/video cables • HDD is a precision apparatus that is susceptible to vibration, strong impact or dirt. Depending on the installation environment or handling, the unit may become partially damaged or in the worst case, recording or replaying may not be available. Especially while the HDD is in motion, do not subject it to vibration or strong impact or pull out the power plug.
CONTENTS Introduction Recording PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Symbols Used in this User Manual . . . . . . . . . . . . . . . . . . .9 FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 10 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONTENTS Introduction 81 81 82 82 83 83 85 86 87 88 89 90 91 93 94 95 96 97 98 99 Recording INFORMATION ON EDITING. . . . . . . . . . . . . . . . . . . . . . Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Edit Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to Access the Edit Menu. . . . . . . . . . . . . . . . . . . . . . EDITING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting a Title.
FEATURES This unit not only plays back the contents on internal HDD, DVD, or CD, but also offers features for you to record on HDD or DVD and edit them after that. The following features are offered with this unit. Recording Playback This unit allows you to record on the HDD, a DVD+RW/RW (rewritable) and a DVD+R/-R (one-time write). You can choose any one for your convenience. Even if you choose DVD-RW/-R, these discs will automatically be recorded in the DVD+VR mode.
FEATURES Compatibility HDD DVD Symbol Description For Recording, Playing Back, and Editing Description refers to HDD Basic Setup Progressive scan system: Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals. HDMI (High-Definition Multimedia Interface): You can enjoy clearer audio/video output when connecting this unit to a display device with an HDMI-compatible port.
FUNCTIONAL OVERVIEW Front Panel 1 2 3* 4 5 6* 7 8 HDD & DVD PLAYER / RECORDER DVDR 3575H USB 13 12 11 10 9 (*) The unit can also be turned on by pressing these buttons. 1. STANDBY-ON button Press to turn the unit on and off. 2. Disc tray Place a disc when opening the disc tray. 3. OPEN/CLOSE A button* Press to open or close the disc tray. 4. Display Refer to “Front Panel Display” on page 14. 5. HDD ACTIVE indicator Appears when HDD is in recording, dubbing, or playing back. 6.
FUNCTIONAL OVERVIEW 1 2 3 4 VIDEO VIDEO OUT IN IN 5 6 Y L PB/CB HDMI OUT L OUT Introduction Rear Panel R AV IN PR/CR COMPONENT VIDEO OUTPUT 12 11 10 9 OUT COAXIAL OPTICAL S-VIDEO DIGITAL AUDIO OUTPUT PCM / BITSTREAM 8 7 Recording 9. AV OUT jacks Use to connect a TV monitor, AV receiver or other device with a RCA audio cable. 10. S-VIDEO IN jack (E1) Use to connect the S-video output of external device with an S-video cable. 11.
FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control. 1 Open the cover. 2 Insert batteries. Using a Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
FUNCTIONAL OVERVIEW (*) The unit can also be turned on by pressing these buttons. Basic Setup Recording Playback Editing Function Setup Others EN E2H40UD.indd 13 Connections 21. DVD button • Press to select the DVD output mode. 22. OPEN/CLOSE A button* • Press to open or close the disc tray. 23. TITLE button • Press to display the title list. 24. SETUP button • Press to display the main menu.
FUNCTIONAL OVERVIEW Front Panel Display 2 1 PM 3 DTV BS CS DR CD VCR DB HDD DVD 4 5 1. PM 4. Current status of the unit : Appears in the afternoon with the clock display. : Appears when playback is paused. 2. DTV : Appears when playing back a disc. : Appears when the channel is in DTV mode. : Appears when the timer programming or OTR has been set and is proceeding. 3. Title / track / file and chapter mark : Appears when indicating a title / track / file number.
ANTENNA CABLE CONNECTION 1 2 Introduction This section describes how to connect your unit to an antenna, cable box, etc. Disconnect the power cord of your TV from the AC outlet. Disconnect RF coaxial cable from antenna input jack of your TV. rear of your TV 2 1 disconnect disconnect Connections VHF / UHF antenna or RF coaxial cable cable TV company Basic Setup 3 ANT. IN Connect cables to the unit. Make the basic connection as illustrated below.
RF MODULATOR CONNECTION If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available stereo audio/video RF modulator. In this case, follow the instructions below. 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.
CONNECTION TO A CABLE / SATELLITE BOX Introduction 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Plug in the power cords of the devices to the AC outlet. e.g.) satellite dish rear of your TV VIDEO IN Connections This connection is for TV loop through only AUDIO IN R L or cable TV company ANT.
CONNECTION TO A TV Make one of the following connections, depending on the capabilities of your existing device.
CONNECTION TO A TV HDMI Mode and Actual Output Signals Introduction Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed. Front Panel Display Video Output Signal 480 Progressive Press [HDMI] 720 Progressive Connections Press [HDMI] 1080 interlaced Press [HDMI] 1080 Progressive Press [HDMI] Basic Setup • The HDMI mode that is not supported by display device will be skipped.
CONNECTION TO AN AUDIO SYSTEM • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information.
BEFORE YOU START After you have completed all the connections, you must find the viewing channel (external input channel) on your TV. Turn on your TV. • If connected to your VCR make sure it is switched off or in standby mode before proceeding. Basic Setup Press “2” on the TV’s remote control, then press channel down button repeatedly until you see “Initial Setup” menu. Connections 1 2 3 After you have made all the necessary connections, press [STANDBY-ON y] to turn on the unit.
BEFORE YOU START This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference. Guide to On-Screen Display / Menu The on-screen display changes in the following order as you press [INFO].
BEFORE YOU START Title/File Name Information HDMI Information 1 Introduction Title Name Information 2 Title Name Video Info. : Audio Info. : My Title 480p Bitstream YCbCr 1 3 Connections File Name Information File Name My File 1 4 1. Displays title/file name. 1 Artist Name Information Basic Setup Windows Media™ Audio Tag Information * This is an example screen only for explanation. Displayed items may vary depending on the disc you insert. 1.
BEFORE YOU START General Setting Menu 1 2 3 4 5 2 6 3 7 8 4 9 5 10 1 General Setting Playback Display Video Recording Clock Channel DivX HDMI Reset All Parental Lock Disc Audio Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode Variable Skip / Replay 1. Playback: To set up the unit to play back discs as you prefer. 2. Display: To set up the OSD screen as you prefer. 3. Video: To set up the video setting. 4. Recording: To set up the unit to record to discs as you prefer. 5.
BEFORE YOU START Because this unit is a combination of HDD and DVD recorder, you must first select which component (output mode) you wish to operate. HDD mode How to Insert a Disc Introduction Switching HDD / DVD Mode 1) Press [OPEN/CLOSE A] to open the disc tray. 2) Place the disc on the disc tray with its label side facing up. Press [HDD] to activate the HDD component. Connections DVD mode Press [DVD] to activate the DVD component. Align the disc to the disc tray guide.
INITIAL SETTING You need to follow these steps when you turn on this unit for the first time. 1 2 Follow the procedure in “Finding the Viewing Channel on Your TV” on page 21 to display “Initial Setup” menu. Use [K / L] to select your desired language, then press [OK]. Initial Setup OSD Language English Français Español 3 Use [K / L] to select the type of broadcasting signal, then press [OK]. Initial Setup Channel Preset Make sure the antenna is connected to “ANTENNA IN” jack.
CHANNEL SETTING Introduction If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures. Auto Channel Scan Connections “General Setting” menu will appear. Use [K / L] to select “Channel”, then press [OK]. “Channel” menu will appear. Basic Setup Use [K / L] to select “Auto Channel Preset”, then press [OK]. Use [K / L] to select the type of broadcasting signal, then press [OK].
CHANNEL SETTING Adding / Deleting Channels You may want to add or delete TV channels if your channel lineup changes or if you no longer watch some channels. Adding channel is only available for the analog TV channels. Make sure • You perform “Auto Channel Scan” before adding or deleting the channels. 1 2 3 4 Press [DTV/TV] to select the mode (DTV or TV) to/from which you want to add/delete channels. Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].
CHANNEL SETTING 5 Manual Channel Preset CH 2 6 • If the setting is complete, press [BACK activate “Manual Channel Preset”. ] to Recording Add Delete Use [K / L] to select “Delete”, then press [OK]. Then select the next channel to delete. Manual Channel Preset Your setting will be activated and it will automatically switch to the next channel so that you can continue adding or deleting channels.
SETTING THE CLOCK Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 31. Auto Clock Setting This unit can set the time and date automatically by referring to a PBS station. Make sure • The antenna/cable TV connections are correct. • Channels are set. (Refer to page 27.
SETTING THE CLOCK “General Setting” menu will appear. Use [K / L] to select “Clock”, then press [OK]. “Clock” menu will appear. Use [K / L] to select “Clock Setting”, then press [OK]. Clock Setting Use [K / L] to select “Clock”, then press [OK]. “Clock” menu will appear. Use [K / L] to select “Daylight Saving Time”, then press [OK]. Use [K / L] to select “ON (MAR NOV)”, “ON (APR - OCT)” or “OFF”, then press [OK].
TUNER SETTINGS Switching Analog Mode / Digital Mode You can easily switch the analog TV (NTSC) and digital TV (ATSC) with the remote control. Press [DTV/TV] on the remote control. • The analog mode and digital mode switch alternately. Note • When you switch the analog mode to the digital mode, it may take about 10 seconds until the digital channel selection is completed. The following screen is displayed while switching the mode. DTV 125.
TUNER SETTINGS Selecting TV Audio Digital TV Connections 1 Press [AUDIO] to cycle through available audio languages. Introduction This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be recorded. English 1/2 Basic Setup Recording • When you press [AUDIO], selected language will be displayed on the TV screen. • Every time you press [AUDIO], the language will be switched. e.g.
TUNER SETTINGS Selecting TV Audio (cont’d) Analog TV 1 2 3 4 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Channel”, then press [OK]. “Channel” menu will appear. Use [K / L] to select “TV Audio Select”, then press [OK]. Use [K / L] to select “Stereo” or “SAP”, then press [OK]. TV Audio Select Stereo SAP Stereo: Outputs main-audio. SAP (secondary audio program): Outputs sub-audio. 5 Press [SETUP] to exit.
TUNER SETTINGS Introduction DTV Closed Caption Digital TV Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC. “General Setting” menu will appear. Use [K / L] to select “Display”, then press [OK]. Use [K / L] to select “CC Style”, then press [OK]. Recording OSD Language Screen Saver FL Dimmer CC Style V-Chip Use [K / L] to select “DTV CC”, then press [OK].
TUNER SETTINGS Closed Caption Style Digital TV Digital TV can also change the style of its closed caption such as font, color or size, etc. 1 2 3 HDD & DVD RECORDER 36 E2H40UD.indd 36 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Display”, then press [OK]. Use [K / L] to select “CC Style”, then press [OK]. OSD Language Screen Saver FL Dimmer CC Style V-Chip 4 Use [K / L] to select “User Setting”, then press [OK].
TUNER SETTINGS Introduction 6 Use [K / L] to select the item and switch the setting for each item you want to set, then press [OK]. Font color of the displayed caption can be switched as below. Font Color • When “User Setting” is set to “ON”, you can set the following items. CC style set by “User Setting” will be displayed. • The setting description for each item is shown below. Background opacity of the displayed caption can be switched as below.
INFORMATION ON RECORDING Before you make a recording, read the following information. Recordable Discs Unrecordable Discs This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only be recorded to once. DVD+RW/ DVD-RW can be recorded to and erased many times. DVD-RW/-R will be recorded in the DVD+VR mode automatically in this unit. Logo Attributes • DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (refer to page 97).
INFORMATION ON RECORDING Recording Mode About HDD Disc size 18 min SP 36 min SPP 45 min LP 54 min (good) EP 72 min SLP 108 min (poor) HQ 60 min (good) SP 120 min SPP 150 min LP 180 min EP 240 min SLP 360 min (poor) HQ 33 hrs (good) SP 66 hrs SPP 82.5 hrs LP 99 hrs EP 132 hrs SLP 198 hrs (poor) Playback • The recording time is only an estimate. The actual recording time may differ. • The audio and video quality gets poorer as the recording time becomes longer.
BEFORE RECORDING Make Recording Compatible Setting for Auto Chapter You can set a specified time for chapter marks. Use this feature to make the unfinalized +VR mode discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title menu is automatically converted to our style. 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING Follow the steps to record TV programs. Connections 1 Insert a recordable disc (refer to page 25 on how to insert a disc). Align the disc to the disc tray guide. It may take a while to load the disc. Refer to “Recording Mode” on page 39. DVD SP 3 0h58m Refer to “Switching Analog Mode/Digital Mode” and “Channel Selection“ on page 32. Function Setup Select the appropriate external input channel by pressing [SOURCE / USB] or [CH / ].
BASIC RECORDING & ONE-TOUCH TIMER RECORDING 4 Press [REC I] to start recording. “I HDD” or “I DVD” will be displayed for 5 seconds. e.g.) DVD 5 Press [STOP C] to stop recording. As for DVD recording, the title list will appear automatically after writing to a disc complete. (Refer to “Guide to a Title List” on page 81.) e.g.) DVD+R I DVD Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC I] again to restart recording. To set one-touch timer recording (OTR)...
TIMER RECORDING Guide to Timer Programming Display 3 1 Introduction You can program the unit to record up to 36 programs within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure • Set the clock before setting a timer programming. • If you are recording to a disc, insert a recordable disc with enough recordable space. 2 Timer Programming FEB/20/07 10:30 AM 125.1 SP SP (1:00) MON FEB/19 11:30AM Date FEB/20 Start End CH 10:30AM 11:30AM DTV125.
TIMER RECORDING 4 Use [K / L / s / B] or [the Number buttons] to enter the start and end time, then press [B]. Date FEB/20 CH DTV125. 1 Start 10 : 30AM REC To HDD End --:-Mode SP SP 5 Start 10 : 30AM REC To HDD 1h00m To record from external input (e.g., cable/ satellite box), select E1 or E2. Use [K / L] to select the channel number to record. For digital mode, select both major and minor channels. Refer to “How to select a channel number for the timer recording” on page 45 for more details. e.g.
TIMER RECORDING How to select a channel number for the timer recording Introduction For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69), the channel will be decided as soon as you enter the channel number. Analog CATV For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13125), the channel will be decided as soon as you enter the channel number.
TIMER RECORDING Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • When recording to a DVD, if a disc is not inserted, the unit will perform the alternate recording to the HDD (refer to page 44). • When a timer recording is completed, the unit will ask you whether to turn off the unit if there is no timer recording which starts within 4 minutes, except under conditions listed below.
SPECIAL RECORDING With [PAUSE LIVE TV], even if you leave your couch while you are watching TV through this unit, you can come back and watch the rest of the program from right where you left at any convenient time with just one touch of a button. When you come back, press [PAUSE LIVE TV] again. Recording The pause mode will be canceled, and the playback will start from the point you pressed the button for the second time in step 1.
SPECIAL RECORDING Overwriting from the Beginning of the Title You can overwrite the existing title from the beginning. 1) Press [STANDBY-ON y]. Make sure that the TV input is set on the unit. 2) Load the disc that includes a title to be overwritten. It takes a while to display the title list. Title list will appear. If the title list does not appear, press [TITLE]. 3) Press [REC MODE] to select a recording mode. Refer to “Recording Mode” on page 39.
SPECIAL RECORDING When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion please check if there is no important title after the overwriting point.
DUBBING Information on Dubbing You can dub the contents of the HDD to DVD or vice verse. Before you start dubbing, refer to page 38 to see the recording compatibility. Guide to Dubbing Menu Display 1 HDD Recording Mode for Dubbing DVD 3000 MB 3 Dubbing List 2 Add Delete All Dubbing Start 4 1/1 1 2 3 4 5 Dubbing direction Dubbing menu Remaining recordable space Dubbing list Current page number / total number of pages 5 “High” This unit is compatible with the high speed dubbing from HDD to DVD.
DUBBING Introduction Settings for an External Device Connect the external device properly to the unit by using input jacks either E2 and E3 (Front) or E1 (Rear). When connecting an external device of monaural output to this unit, use AUDIO L jack of E2 (Front). Use S-video or the RCA audio/video cables for this connection. When connecting a DV-camcorder, use DV input jack of E3 (Front) instead of S-VIDEO IN or VIDEO IN jack.
DUBBING Recording from an External Device Before recording from an external device, refer to the instructions for the connection on page 51. If you are recording to the HDD, press [HDD] first, then proceed to step 2. If you are recording to a disc, press [DVD] first. 1 2 HDD & DVD RECORDER 3 4 5 6 Insert a recordable disc (refer to page 25 on how to insert a disc). It takes a while to load the disc. Select the appropriate external input channel (E1, E2 or E3) by pressing [SOURCE / USB] or [CH / ].
DUBBING Introduction Information on DV Dubbing This function helps you to easily dub the contents in the DVC (digital video camcorder) to HDD or DVD. You can control basic operations of the DVC from the remote control of this unit if the DVC is in video mode. Guide to DV and On-Screen Display When the DVC is in camera mode... When the DVC is in video mode...
DUBBING DVC to HDD / DVD Dubbing Before recording from DVC, refer to page 51 for connection instructions. Preparing for DV dubbing (DVC to HDD): • Make sure your DVC is in video mode. Preparing for DV dubbing (DVC to DVD): • Insert a recordable DVD. • Make sure your DVC is in video mode. If you are dubbing to the HDD, press [HDD] first. If you are dubbing to a disc, press [DVD] first. 1 Use [SOURCE / USB] or [CH / ] to select “E3 (DV-IN)” channel.
DUBBING Connections 6 Use [K / L] to select “Start Rec”, then press [OK]. Introduction 5 Press [PLAY B] to start playing back the DVC, and find the point where you wish to start dubbing. Press [STOP C] when you come to the desired start point. The dubbing will start. Basic Setup To stop dubbing; 1) Use [K / L] to select “Control”, then press [OK]. 2) Use [K / L] to select “HDD” or “DVD” (whichever the recording component you are using), then press [OK]. 3) Press [STOP C].
DUBBING Selected Title Dubbing Preparing for dubbing (HDD to DVD): • Insert a recordable DVD. Preparing for dubbing (DVD to HDD): • Insert a disc to be dubbed. 1 2 Press [SETUP] in stop mode. Use [K / L] to select “Dubbing”, then press [OK]. Setup General Setting Timer Programming Title List Disc Edit HDD Menu Dubbing 3 HDD to DVD Use [K / L] to select “HDD then press [OK]. DVD”, DVD to HDD Use [K / L] to select “DVD then press [OK]. HDD”, e.g.
DUBBING e.g.) HDD 8 Use [s / B] to select a desired recording mode, then press [OK]. HDD Introduction 5 Use [K / L / s / B] to select a desired title, then press [OK]. DVD Title List ABCDE 12:00AM (10:00:00) JAN/ 1/07 1 2 Please select REC MODE. CH10 SP High 3 HQ SP SPP LP EP 4 5 Repeat steps 4 to 5 until you register all the titles to be dubbed. Yes No Dubbing will start. • It may take awhile to prepare for the dubbing.
DUBBING One Title Dubbing (HDD to DVD only) This function lets you select one specific title from the title list for dubbing. Preparing for dubbing: • Insert a recordable DVD. 1 2 3 4 Press [HDD] first. Press [TITLE]. Use [K / L / s / B] to select a desired title to dub, then press [OK]. Use [K / L] to select “Dubbing”, then press [OK]. Resume Playback Play From Start Edit Title Delete Delete Multiple Titles Dubbing Use [K / L] to select “Yes”, then press [OK].
PROTECTING A DISC Press [SETUP]. Use [K / L] to select “Disc Edit”, then press [OK]. Connections 1 2 3 Introduction To prevent accidental recording, editing or erasing the titles, you can protect them from “Disc Edit” menu. Use [K / L] to select “Disc Protect OFF ON”, then press [OK]. e.g.) DVD+RW Disc Edit Basic Setup Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON Recording 4 Use [K / L] to select “Yes”, then press [OK].
PLAYING THE DISCS ON OTHER DVD PLAYERS Finalizing a Disc You will need to finalize DVD+R, DVD-RW or DVD-R to play them back on other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. 1 2 3 4 Press [SETUP]. Use [K / L] to select “Disc Edit”, then press [OK]. “Disc Edit” menu will appear. Use [K / L] to select “Finalize”, then press [OK].
PLAYING THE DISCS ON OTHER DVD PLAYERS You can finalize discs automatically using this function. You can use this function to finalize discs after finishing all timer recordings and at the end of the disc space. “General Setting” menu will appear. Use [K / L] to select “Recording”, then press [OK]. “Recording” menu will appear. Use [K / L] to select “Auto Finalize”, then press [OK]. Use [K / L] to select “Disc Full” or “End of Timer Rec”, then press [OK].
INFORMATION ON PLAYBACK Before you play back DVD, read the following information. Playable Discs and Files This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos will play back on the unit. Other disc types are not guaranteed to play back.
INFORMATION ON PLAYBACK PBC (playback control) for Video CD DVD-video title 1 chapter 1 chapter 2 track 1 chapter 1 title 2 chapter 2 audio CD, video CD track 2 track 3 track 4 chapter 3 track 5 MP3, Windows Media™ Audio, JPEG folder 1 folder 2 file 1 file 2 file 3 file 4 Basic Setup • PBC setting turns to “ON” when loading video CD with PBC function, thus, even after setting PBC to “OFF” and ejecting the video CD then reloading the video CD, this setting turns to “ON” automatically.
BASIC PLAYBACK Direct Playback If you are playing back the titles in HDD, press [HDD] first, then proceed to step 2. If you are playing back the titles in DVD, press [DVD] first. 1 Insert a disc (refer to page 25 on how to insert a disc). Align the disc to the disc tray guide. * Make sure the disc is compatible with this unit. (Refer to page 62 for the list of compatible discs.) It may take a while to load the disc. 2 3 Press [PLAY B] to start playback.
BASIC PLAYBACK If you are playing back the titles in HDD, press [HDD] first, then proceed to step 2. If you are playing back the titles in DVD, press [DVD] first. * Make sure the disc is compatible with this unit. (Refer to page 62 for the list of compatible discs.) It may take a while to load the disc. 3 Use [K / L // s / B] to select a desired title, then press [OK]. Recording • To exit the title list, press [STOP C]. • To resume the title list, press [TITLE].
BASIC PLAYBACK Note for DVD title list If you want to see disc information, press [{ ] when the first page of the title list is displayed or press [ K ] when the first title is selected but not when “Play”, “Edit” or “Overwrite” is highlighted. e.g.) DVD+RW 4 Use [K / L] to select “Play” (for DVD), or select “Resume Playback” or “Play from Start” (for HDD), then press [OK]. e.g.
BASIC PLAYBACK 2 Use [K / L] to select a desired folder or track/file, then press [OK]. e.g.) Audio CD Introduction Playing Back an Audio CD and a CD-RW/-R with MP3/Windows Media™ Audio/JPEG Files File List DISC NAME Connections A B 1 2 3 4 5 6 JPEG file1 JPEG file2 MP3 file1 MP3 file2 WMA file1 WMA file2 1/ 2 Others • The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck. • Files whose extension is other than “.mp3(MP3)” “.wma(Windows Media™ Audio)” or “.jpg / .
BASIC PLAYBACK Playing Back a USB Device with MP3/Windows Media™ Audio/JPEG Files You can play back the contents in a USB device. USB memory or USB card reader USB HDD & DVD PLAYER / RECORDER DVDR 3575H USB front of this unit 1 2 Press [SOURCE / USB] repeatedly to select the appropriate external input channel for USB device. This will set the unit in the USB mode. • To exit the USB mode, select any other input channel. Plug in your USB device. If USB memory is connected; - file list will appear.
BASIC PLAYBACK 1 Introduction Playing Back a DivX® Press [DVD] first. Insert a playable disc (refer to page 25 on how to insert a disc). * Make sure the disc is compatible with this unit. (Refer to page 62 for the list of compatible discs.) Connections It may take a while to load the disc. File list will appear automatically. • To exit the file list, press [STOP C]. • To resume the file list, press [TITLE]. Basic Setup 2 Use [K / L] to select the desired folder or file, then press [OK].
BASIC PLAYBACK It is recommended that files to be played back in this unit are recorded under the following specifications: Official DivX® Certified product • Playable codec of AVI files : DivX®3.x, DivX®4.x, DivX®5.
BASIC PLAYBACK Pause Introduction Using the Title / Disc Menu 1) During playback, press [PAUSE F]. Playback will be paused. It may take a while to load the disc. 2) Press [TITLE] or [DISC MENU] to call up the title list or disc menu. F 2) Press [PLAY B] to return to the normal playback. Basic Setup Press [DVD] first. 1) Insert a disc (refer to page 25 on how to insert a disc). * Make sure the disc is compatible with this unit. (Refer to page 62 for the list of compatible discs.
SPECIAL PLAYBACK Resume Playback Note You can play back from where you stopped playing back the disc last. 1) During playback, press [STOP C]. The resume message will appear. Resume ON 2) Press [PLAY B]. In a few seconds, playback will resume from the point at which it stopped last. You can resume playback at the same point even if you turn off the unit (HDD/DVD only). To cancel the resume playback and start playing back the disc from the beginning, press [STOP C] again while the playback is stopped.
SPECIAL PLAYBACK Time Shift Playback • Only step by step forward playback is available for playing back video CD and DivX® files. 1/16x pause 1/16x 1/8x Simultaneous Playback and Recording 1/3x Note Note • Video CD, Audio CD, MP3/JPEG files recorded on a disc and DivX® files can also be played back during HDD recording. Function Setup Others • Forward/reverse speed will be indicated with icons as follows. forward (approx. speed) 1/16x: 1/8x: 1/3x: reverse (approx.
SPECIAL PLAYBACK Marker Setting Zoom This feature allows you to assign a specific point on a title to be called back later. 1) During playback, press [INFO]. , then press [OK] within 1 2) Use [{ / B] to select second or wait for 1 second to display the selection menu. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video 1) During playback, press [INFO]. , then press [OK] within 1 2) Use [{ / B] to select second or wait for 1 second to display the marker list. e.g.
SPECIAL PLAYBACK Note Available repeat function may vary depending the discs. 1) During playback press [INFO]. 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video 1/ 5 1/ 5 Random Playback Basic Setup 3) Use [K / L] to select a desired repeat type, then press [OK]. e.g.) HDD/DVD-video 0:01:00 / 1:23:45 DVD Video OFF Title Chapter A–B You can play back a disc randomly instead of playing back in the original order. e.g.) audio CD, video CD 1) Press [SETUP]. 0:00:15 / 0:05:00 CD OFF Track All A–B e.g.
SPECIAL PLAYBACK Program Playback Slide Show You can program the disc to play back in your desired order. You can select the display time between 5 seconds and 10 seconds. 1) Press [SETUP]. 1) Follow steps 1 and 2 in “Random Playback” on page 75. 2) Use [K / L] to select “CD Playback Mode”, then press [OK]. “CD Playback Mode” menu will appear. 3) Use [K / L] to select “Program Play”, then press [OK]. 2) Use [K / L] to select “Slide Show”, then press [OK].
SEARCH Track Search Introduction Title / Chapter Search Using [PREV ] / [NEXT ] Using [PREV ] / [NEXT ] Note Using [INFO] 1) During playback, press [INFO]. 2) Use [{ / B] to select e.g.) audio CD • With regard to HDD, chapter search using [PREV ] / [NEXT ] is available only within the same title. 1/ 5 , then press [OK]. 0:00:15 / 0:05:00 CD Recording Using [INFO] Basic Setup To go back to the beginning of the current title or chapter, press [PREV ].
SEARCH Time Search 1) During playback, press [INFO]. , then press [OK]. 2) Use [{ / B] to select e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video e.g.) audio CD 1/ 5 0:00:15 / 0:05:00 CD The number next to will be highlighted. To move to the number next to , press [B]. When time search is not available, counter are not displayed. and time 3) Use [K / L / { / B] or [the Number buttons] to enter a desired time to search, then press [OK]. After the search, playback will start automatically.
SELECTING THE FORMAT OF AUDIO AND VIDEO Switching Subtitles Switching Audio Soundtrack When playing back a DVD-video recorded with 2 or more soundtracks (these are often in different languages), you can switch them during playback. When playing back video CD, audio CD you can switch “L/R”(stereo), “L”(left) or “R”(right). 1) During playback, press [INFO]. 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video 1/ 5 3) Use [K / L] to select a desired audio soundtrack or audio channel, then press [OK].
SELECTING THE FORMAT OF AUDIO AND VIDEO Switching Virtual Surround System You can enjoy stereophonic virtual space through your existing 2 channel stereo system. 1) During playback, press [INFO]. 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. e.g.) DVD-video 1/ 5 1/ 5 Switching Camera Angles Some DVD-video have scenes shot from 2 or more angles. Angle information should be on the disc case if the disc contains multi-angle scenes.
INFORMATION ON EDITING Title list allows you to check the titles recorded on the HDD or the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [HDD], then press [TITLE]. Press [DVD], then press [TITLE].
INFORMATION ON EDITING Edit Menu Media Available Futures Putting names on titles HDD DVD ✔ ✔ Deleting a title ✔ ✔ Deleting selected titles ✔ Deleting a scene of a title ✔ Adding / deleting chapter marks ✔ ✔ ✔ Hiding chapters Protecting a title ✔ Dividing a title ✔ ✔ *1 ✔ Setting an index picture Finalizing a disc ✔ Making edits compatible ✔ *2 Note Putting name on disc ✔ Setting or Releasing disc protect ✔ • Once you have finalized a DVD+R/ DVD-R, you cannot edit or record anyth
EDITING You can delete a title which you do not need anymore. Please be advised that the title once deleted cannot be brought back. Introduction Deleting a Title If you are editing the titles on HDD, press [HDD] first. If you are editing the titles on DVD, press [DVD] first. Use [K / L / { / B] to select a desired title to delete, then press [OK].
EDITING 3 Use [K / L] to select “Edit”, then press [OK]. Play Edit Overwrite SP 1 Final confirmation message will appear. Select “Yes”, then press [OK]. NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 The title is now deleted. 2 NOV/22/07 11:35AM CH13 EP NOV/22/07 0:10:33 3 Title List JAN/ 1/07 12:00AM CH10 SP 12:00AM (1:00:00) JAN/ 1/07 EMPTY TITLE 1:37:52 SP 4 5 Use [K / L] to select “Yes”, then press [OK]. 1 2 4 5 CH10 SP 3 Use [K / L] to select “Title Delete”, then press [OK].
EDITING You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back. 4 Use [K / L / { / B] to select the title you want to delete, then press [OK]. Resume Playback Play From Start Edit Title Delete Delete Multiple Titles Dubbing Basic Setup Title List Title 1 12:00AM (1:00:00) JAN/ 1/07 CH10 SP 1 2 3 4 5 6 Recording 1/1 Trash mark will appear indicating the title is marked for deletion.
EDITING Putting Names on Titles You can put title names on the titles and change the names from this menu. 4 Use [K / L] to select “Yes”, then press [OK]. +VR Edit - Edit Title Name 1 Yes No MY FAVORITE 0:00:59 The title name is now updated. 5 Press [BACK ] once or repeatedly to go back to the title list. For DVD, the data will be written onto the disc momentarily. This operation may take a while to be completed.
EDITING You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. Introduction Chapter Marks (Add) To add a chapter mark: Use [K / L] to select “Chapter Mark”, then press [OK]. Connections Submenu will appear. Play back the title up to the point where you want to set a new chapter mark. When it comes to the desired point, press [PAUSE F]. e.g.) DVD +VR Edit - Chapter Mark 1 Recording Use [K / L] to select “Add”, then press [OK].
EDITING Chapter Marks (Delete) To delete a chapter mark: 1 2 3 Follow steps in “How to Access the Edit Menu” on page 82 to display “Edit” menu. Use [K / L] to select “Chapter Mark”, then press [OK]. Submenu will appear. Use [PREV ] / [NEXT ] to go to the chapter with the chapter mark number you want to delete, then press [PAUSE F]. Chapter mark number is displayed on the preview screen. e.g.
EDITING Introduction Chapter Marks (Delete All) To delete all chapter marks: Use [K / L] to select “Chapter Mark”, then press [OK]. Connections Submenu will appear. Use [K / L] to select “Delete All”, then press [OK]. Basic Setup Use [K / L] to select “Yes”, then press [OK]. +VR Recording 1 2 3 4 Follow steps in “How to Access the Edit Menu” on page 82 to display “Edit” menu.
EDITING Dividing a Title You can divide one title into 2 new titles. 1 2 3 4 Follow steps in “How to Access the Edit Menu” on page 82 to display “Edit” menu. Play back the title up to the point where you want to divide the title. When it comes to the desired point, press [PAUSE F]. Use [K / L] to select “Title Dividing”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. The title is now divided into 2 new titles, and it will go back to the title list automatically.
EDITING You can delete a specific part of a title. Follow steps in “How to Access the Edit Menu” on page 82 to display “Edit” menu. Use [K / L] to select “Scene Delete”, then press [OK]. Edit 1 Basic Setup Scene Delete Edit Title Name Chapter Mark Title Dividing Protect JAN/ 1/07 12:00AM CH10 LP 1 : 25 : 47 Play back the title up to the point where you want to set a start point for the scene to be deleted, then press [OK].
EDITING 5 With “Preview” highlighted, press [OK] to preview the result. Before and after 5 seconds of the deleted scene can be previewed every time you press [OK]. • If you are not satisfied with the result, use [K / L] to go back to “Start” or “End”, and try setting them again. • If you are satisfied with the result, proceed to step 6. 7 Use [K / L] to select “Yes” then press [OK].
EDITING To prevent the accidental editing, or erasing of the titles, you can protect them in “Edit” menu. Follow steps in “How to Access the Edit Menu” on page 82 to display “Edit” menu. Use [K / L] to select “Protect”, then press [OK]. Connections 1 2 Introduction Protecting a Title Edit 1 Scene Delete Edit Title Name Chapter Mark Title Dividing Protect Basic Setup JAN/ 1/07 12:00AM CH10 LP 1 : 25 : 47 ON” selected, press Recording 3 With “OFF [OK].
EDITING Hiding Chapters You can hide chapters from the title list. Hidden chapters are skipped during playback. 1 2 3 4 Follow steps in “How to Access the Edit Menu” on page 82 to display “Edit” menu. Use [K / L] to select “Hide Chapter”, then press [OK]. Submenu will appear. Use [PREV ] / [NEXT ] to go to the chapter you want to hide, then press [PAUSE F]. Use [K / L] to select “Hidden”, then press [OK].
EDITING You can set your desired scene as an index picture for each title. Follow steps in “How to Access the Edit Menu” on page 82 to display “Edit” menu. Play back the title to find the scene you want to use as an index picture. When it comes to the desired point, press [PAUSE F]. Use [K / L] to select “Yes”, then press [OK]. +VR Basic Setup Use [K / L] to select “Index Picture”, then press [OK].
EDITING Putting Name on Disc Press [STOP C] if you are playing back a disc. You can put a name on the disc and change it from this menu. 1 2 3 Press [SETUP]. Use [K / L] to select “Disc Edit”, then press [OK]. Use [K / L] to select “Edit Disc Name”, then press [OK]. e.g.) DVD+RW Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON A window for entering a title name will appear.
EDITING You can erase all titles on a disc. Introduction Erasing Disc Press [STOP C] if you are playing back a disc. Use [K / L] to select “Disc Edit”, then press [OK]. Basic Setup Use [K / L] to select “Erase Disc”, then press [OK]. Connections 1 2 3 Press [SETUP]. e.g.) DVD+RW Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON Recording When you press “Yes”, all the contents in the disc will be erased.
EDITING Making Edits Compatible If you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” to see those effects on other unit. Press [STOP C] if you are playing back a disc. 1 2 3 Press [SETUP]. 4 Use [K / L] to select “Yes”, then press [OK]. Use [K / L] to select “Disc Edit”, then press [OK]. Use [K / L] to select “Make Edits Compatible”, then press [OK].
EDITING Introduction Deleting All Titles in HDD Press [STOP C] if you are playing back a disc. Connections Use [K / L] to select “HDD Menu”, then press [OK]. Use [K / L] to select the desired type of deletion, then press [OK]. Select “Delete All Unprotected Titles” if you want to delete only the unprotected titles. Select “Delete All Titles” if you want to delete all titles including the ones protected. Basic Setup 1 2 3 Press [SETUP].
LIST OF SETTINGS The following table is the contents which you can set and the default setting. Refer to the following table for useful operation.
LIST OF SETTINGS Items (highlight is the default) CC Style Font Style Pages 35-37 Font Opacity General Setting Back Color Video Pages 109-110 Progressive Scan Recording Set the downloadable rating. Set back opacity of the displayed caption. Set back color of the displayed caption. Set to the progressive scan mode (set to "ON") or to the interlace scan mode(set to "OFF"). Set a picture size according to aspect ratio of your TV. Set the video input type for E1 external input.
LIST OF SETTINGS Setup Clock Pages 30-31 Items (highlight is the default) Clock Setting Auto Clock Setting Daylight Saving Time Channel Pages 27-29 Auto Channel Preset General Setting Manual Channel Preset TV Audio Select Pages 33-34 DivX Page 111 DivX®VOD DivX Subtitle HDMI Page 112 Format HDMI Audio RGB Range Reset All Page 113 OFF Auto Manual ON(MAR-NOV) ON(APR-OCT) OFF Antenna Cable (Analog) Cable (Analog/Digital) Stereo SAP OFF English French Spanish German Italian Swedish Dutch Russian1 Ru
SETUPS Introduction Playback Press [STOP C] if you are playing back a disc. Use [K / L] to select “Playback”, then press [OK]. General Setting Basic Setup Playback Display Video Recording Clock Channel DivX HDMI Reset All Use [K / L] to select a desired item, then press [OK]. Parental Lock Disc Audio Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode Variable Skip / Replay Playback 1 2 3 4 5 6 7 8 Recording 3 “General Setting” menu will appear.
SETUPS Playback (cont’d) 1 Parental Lock (Default: OFF) (DVD only) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. Use [K / L] to select the desired level, then press [OK].
SETUPS 2 C Disc Audio Choose the appropriate audio setting for your external device. It will only affect a disc playback. Dolby Digital PCM Stream Dynamic Range Control PCM Dolby Digital Dynamic Range Control (Default : ON) (DVD only) Dynamic Range Control ON OFF Note • Dynamic range control function is available only with the titles which are recorded in the Dolby Digital format. Set the language for disc menu. Use [K / L] to select a setting, then press [OK].
SETUPS Playback (cont’d) 5 Subtitle Language (Default : OFF) (DVD only) Set the subtitle language. Use [K / L] to select a setting, then press [OK]. 7 Still Mode (Default : Auto) (DVD only) Select “Auto” usually. Use [K / L] to select a setting, then press [OK]. Still Mode Subtitle Language Auto Field Frame OFF English French Spanish Other Your setting will be activated. If “Other” is selected for 3 to using [the Number buttons]. 5 , press 4-digit code Your setting will be activated.
SETUPS Press [STOP C] if you are playing back a disc. Use [K / L] to select “Display”, then press [OK]. 1 2 3 4 5 OSD Language Screen Saver FL Dimmer CC Style V-Chip When you finish with setting, press [SETUP] to exit. Playback 4 5 Refer to 1 to 5 on page 108 and set the selected item. • For 4 refer to pages 35-37. Recording Selection menu will appear. Basic Setup Use [K / L] to select a desired item, then press [OK].
SETUPS Display (cont’d) 1 OSD Language (Default : English) Set the language for the on-screen display. Use [K / L] to select a setting, then press [OK]. OSD Language 1) Use [the Number buttons] to enter the access password. If you have not set the password, first, use [the Number buttons] to set the access password, then press [OK]. The number you entered will be stored as the access password. English Français Español Password Input Your setting will be activated.
SETUPS Press [STOP C] if you are playing back a disc. Use [K / L] to select “Video”, then press [OK]. 1 Progressive Scan 2 TV Aspect 3 Video Input Basic Setup Use [K / L] to select a desired item, then press [OK]. Connections 1 2 3 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Introduction Video Submenu will appear. Playback When you finish with setting, press [SETUP] to exit. Recording 4 5 Refer to 1 to 2 on page 110 and set the selected item.
SETUPS Video (cont’d) 1 Progressive Scan (Default : OFF) This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”. 1) Use [K / L] to select “ON“, then press [OK]. Progressive Scan 2) Use [{ / B] to select “Yes“, then press [OK]. Activating progressive scan: Check your TV has progressive scan and connect with component video cable.
SETUPS Use [K / L] to select a desired item, then press [OK]. 1 DivX R VOD 2 DivX Subtitle Refer to 1 and 2 on this page and set the selected item. When you finish with setting, press [SETUP] to exit. DivX® VOD (DVD only) Editing DivX R VOD Your registration code is : To learn more visit www.divx.com/vod 2 DivX Subtitle (Default : OFF) (DVD only) Set the DivX® subtitle. Use [K / L] to select a setting, then press [OK].
SETUPS HDMI 3 Use [K / L] to select a desired item, then press [OK]. 4 5 Refer to 1 to 3 on this page and set the selected item. 1 1 Format 2 HDMI Audio 3 RGB Range When you finish with setting, press [SETUP] to exit. Format (Default : RGB) You can select the color space for HDMI output. Set the appropriate color space for your display device. Use [K / L] to select a setting, then press [OK].
SETUPS Reset the setting to default. “General Setting” menu will appear. Use [K / L] to select “Reset All”, then press [OK]. Select “Yes” using [K / L] , then press [OK]. Basic Setup Reset to factory default? Yes No Select “Yes” again using [K / L] , then press [OK]. Are you sure? Yes No Recording 4 Connections 1 2 3 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Introduction Reset All Your setting in recording will be initialized.
TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. POWER Symptom The power does not turn on. The unit turns on automatically without any operation. The OSD language menu appears every time the power turns on. Remedy • Check that the AC power cord is connected securely. • Batteries of the remote control are weak.
TROUBLESHOOTING No image from HDMI connection. CHANNEL GENERAL The image from the external device • Try pressing [SOURCE / USB] repeatedly. cannot be displayed or recorded. • Turn on all connected devices. • Check if the connections are made securely and correctly. RECORDING The indication “ Writing to Disc does not disappear. 100% ” Others DVD Recording is impossible. Function Setup Titles which were supposed to be recorded by the pause live TV function cannot be found in the title list.
TROUBLESHOOTING EDITING HDD / DVD DVD PLAYBACK HDD HDD/DVD GENERAL TV aspect ratio does not match your TV screen. • Check the TV Aspect Ratio. (Refer to page 110.) • A different aspect ratio will be used when the aspect ratio specified by the disc is not supported by this unit. Playback picture is distorted. • During fast forward or fast reverse, playback picture may be distorted. Color of the picture is abnormal. This is not a malfunction. • Connect to TV directly.
TROUBLESHOOTING The remote control does not function. • No batteries in the remote or the batteries may be weak. Replace the batteries. • Make sure there is no obstacle between the remote and the unit. • Try getting closer to the unit. (Refer to page 12.) • If above solutions do not solve the problem, please call an Authorized Service Center. Connections REMOTE CONTROL The capacity of the disc doesn’t increase even if the recorded program is deleted. Dubbing cannot be executed.
TROUBLESHOOTING Error message Cause Solution Disc Error — Please eject the disc. — Playback feature may not be available on this Disc. • Unplayable disc is inserted in the unit. • The disc is upside down. • Insert the standardized disc which bear the marks on page 62. • Insert the disc with the labeled side facing up. Region Error — Please eject the disc. — Playback is not authorized in your region. • Playback is not authorized in the region of the DVD-video which you inserted in the unit.
LANGUAGE CODE Editing Function Setup Others Code 6467 6559 6553 6547 5350 6564 6554 6566 6660 6560 6550 6555 6565 6557 6558 6561 5165 6567 6569 6568 6658 6653 6647 6666 6651 6654 4861 6655 6661 6665 6664 6657 6669 6757 6764 6772 6855 6861 4971 6961 7054 5655 7161 7267 Playback Language Russian Samoan Sangho Sanskrit Scots Gaelic Serbian Serbo-Croatian Sesotho Setswana Shona Sindhi Singhalese Siswat Slovak Slovenian Somali Spanish Sundanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Ti
GLOSSARY Analog Audio PBC (playback control) (video CD only) An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. This function enables you to play back interactive software using a menu screen. See also “Video CD”. Aspect Ratio The width of a TV screen relative to its height.
SPECIFICATIONS +VR (video recording) format DVD+Rewritable, DVD+Recordable DVD-Rewritable, DVD-Recordable (+VR mode only) 13.5 MHz MPEG 2 Audio recording format Sampling frequency Compression format 48 kHz Dolby Digital Front VHF 2~13, UHF 14~69 2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A1, 5A 2V rms (input impedance: more than 22kΩ) Playback 1Vp-p (75Ω) USB 2.
LIMITED WARRANTY PHILIPS LIMITED WARRANTY ONE (1) YEAR WARRANTY COVERAGE: PHILIPS warranty obligation is limited to the terms set forth below. WHO IS COVERED: Philips warrants the product to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer.
E2H40UD.
PHILIPS CONSUMER ELECTRONICS Philips Electronics Company A Division of Consumer Philips Electronics North America Corp GA 30006-0026 P.O. BoxMarietta, 671539 Marietta, GA 30006 00296 Meet Philips at the Internet http://www.philips.com/welcome DVDR3575H/37 HTS6600 CLASS 1 LASER PRODUCT 3139300 245 25683 8239 56622 Printed in China JpnCN-0721/37-3 1VMN23584A **** E2H40UD E2H40UD.
