Software Upgrade

Philips V&MA

Firmware Upgrade

A new software is available to improve the performance of the product.

This upgrade is applicable for the following models:

DVDR3510V/05, DVDR3510V/31, DVDR3510V/51 and DVDR3510V/58.

Note: Before you proceed to upgrade, please be reminded that you need to do

configuration again each time after firmware upgrade!

Upgrade Procedure

Check your current version

First check your current firmware version to see if you need to upgrade:

1. When TV shows Philips wallpaper, close disc tray with no disc.

2. Press <0>, <0>, <0>, <9>, <OK> on the Remote Control.

Note: In case the firmware version does not appear on the screen, eject and close the disc

tray to reset, and repeat step 2.

3. The software version will be displayed on the TV screen as shown in the example below.

4. Compare your recorder firmware build date shown on screen with this date,

“Mar 5 2008”

5. If your existing firmware build date is earlier than the above date, please proceed to step 2

Otherwise, you do not need to upgrade.

Download firmware upgrade

Click the link to download the new firmware package on your computer. The package is

compressed into a single ZIP archive: DVDR3510V_EU_Mar_5_2008.zip.

Burning the firmware on CD-R / CD-RW

Note: You will need one blank CD-R or CD-RW disc for this step.

1. Extract the firmware upgrade files from the ZIP archive:

DVDR3510V_EU_V06_08.CUB

PHILIPS_61060201.BIN

PHILIPS_68092500.BIN

(Do not rename the filenames)

Step 1

Step 2

Step 3

DVDR3510V_EU Firmware Upgrade

Tip: For more

information on burning

software we refer to

two popular burning

software programs

www.nero.com

www.easycdcreator.com

PAGE 1
Philips V&MA DVDR3510V_EU Firmware Upgrade Firmware Upgrade A new software is available to improve the performance of the product. This upgrade is applicable for the following models: DVDR3510V/05, DVDR3510V/31, DVDR3510V/51 and DVDR3510V/58. Note: Before you proceed to upgrade, please be reminded that you need to do configuration again each time after firmware upgrade! Upgrade Procedure Step 1 Check your current version First check your current firmware version to see if you need to upgrade: 1.
PAGE 2
Philips V&MA 2. 3. Burn ALL the extracted files: “.CUB” and “.BIN” files (not the ZIP file) onto a blank CD-R or CD-RW disc, using the following settings: - File System: ISO 9660 + Joliet - File name length : max11 chars = 8+3 (Level 1) - Mode : 2/XA - Character set : ISO 9660 (ISO normal CD-ROM) - No multi session - Write Speed: Low Finalize the discs. (The application may do this automatically.
PAGE 3
Philips V&MA Note: If you do not see any of the above figures, please use the same upgrade disc and repeat Step 4 and Step 5 Firmware upgrade history Firmware Version V06_08 Release Date Mar 8 2008 This upgrade software improves the following performance:  Improved supportability for GoGear series (e.g.