Software Upgrade

Table Of Contents

Philips V&MA

DVDR3505 Firmware Upgrade

Firmware Upgrade

We have developed a firmware upgrade to improve your product.

This upgrade is applicable for the following models:

DVDR3505/37

Note: Before you proceed to upgrade, please be reminded that you need to do configuration again

each time after firmware upgrade!

Upgrade Procedure

Ste

Check your current version

First check your current firmware version to see if you need to upgrade:

1. When TV shows Philips wallpaper, close disc tray with no disc.

2. Press <Skip>, <1>, <2>, <3> on the remote control

Note: In case the firmware version does not appear on the screen, eject and close the disc tray to reset, and

repeat step 2.

3. The software version will be displayed on the TV screen as shown in the example below.

BE Version: RD3PxxxxxH1E or RD4PxxxxxH1E

FE Version: xxx_xxx_xxx

4. Compare your recorder firmware BE version shown on screen with this version,

RD3P06650H1E or RD4P29848H1E

5. If your existing firmware BE version is lower than the above version(highlighted in BLUE), please proceed to

Step 2 (Download firmware upgrade) below.

Otherwise, you do not need to upgrade.

Note: Press the <BACK> button to exit the version information screen.

PAGE 1
Philips V&MA DVDR3505 Firmware Upgrade Firmware Upgrade We have developed a firmware upgrade to improve your product. This upgrade is applicable for the following models: DVDR3505/37 Note: Before you proceed to upgrade, please be reminded that you need to do configuration again each time after firmware upgrade! Upgrade Procedure Step 1 Check your current version First check your current firmware version to see if you need to upgrade: 1. When TV shows Philips wallpaper, close disc tray with no disc. 2.
PAGE 2
Philips V&MA Step 2 Download firmware upgrade Click the link to download the new firmware package on your computer. The package is compressed into a single ZIP archive: DVDR3505_37.zip Step 3 Burning the firmware on CD-R / CD-RW Note: You will need one blank CD-R or CD-RW disc for this step. 1. 2. 3. Extract the firmware upgrade files from the ZIP archive: RD3P06650H1E.MOT RD4P29848H1E.MOT R40_016_000.
PAGE 3
Philips V&MA Step 5 Confirm successful upgrade 1. 2. Press , <1>, <2>, <3> on the Remote Control. The software version will be displayed on the TV screen as shown in the example below.