Software Upgrade

Table Of Contents

Philips V&MA

DVDR3480_EU Firmware Upgrade

Firmware Upgrade

Philips has developed a firmware upgrade for continuous product improvement.

This upgrade is applicable for the following models:

DVDR3480/05, DVDR3480/31, DVDR3480/51 and DVDR3480/58.

Note: Before you proceed to upgrade, please be reminded that you need to do a configuration

again each time after firmware upgrade.

Upgrade Procedure

Ste

Check your current software version

First check your current firmware version to see if you need to upgrade your recorder:

1. Ensure that there is no disc in disc tray.

2. Press <0>, <0>, <0>, <9>, <OK> on the Remote Control.

Note: In case the firmware version does not appear on the screen, eject and close the disc tray to reset, and

repeat step 2.

3. The Set Software Version will be displayed on the TV screen as shown in the example below.

4. Compare your current software version number shown on screen with this version,

“03_09”

5. If your current software version number is lower than the above version, please proceed to step 2.

Otherwise, upgrade is not necessary.

Ste

Download firmware upgrade

Click the link to download the new firmware package on your computer. The package is compressed into a

single ZIP archive: DVDR3480_58_R03_09.zip.

Ste

Burning the firmware on CD-R / CD-RW

Tip: For more

information on burning

software we refer to

two popular burning

software programs

www.nero.com

www.easycdcreator.com

Note: You will need one blank CD-R or CD-RW disc for this step.

1. Extract the firmware upgrade files from the ZIP archive:

DVDR3480_58_R03_09.BIN (for Set Software upgrade)

PHILIPS_68092700.BIN (for Loader upgrade)

(Do not rename the filenames)

PAGE 1
Philips V&MA DVDR3480_EU Firmware Upgrade Firmware Upgrade Philips has developed a firmware upgrade for continuous product improvement. This upgrade is applicable for the following models: DVDR3480/05, DVDR3480/31, DVDR3480/51 and DVDR3480/58. Note: Before you proceed to upgrade, please be reminded that you need to do a configuration again each time after firmware upgrade.
PAGE 2
Philips V&MA 2. 3. Burn ALL the extracted files: “.BIN” files (not the ZIP file) onto a blank CD-R or CD-RW disc, using the following settings: - File System: ISO 9660 + Joliet - File name length : max11 chars = 8+3 (Level 1) - Mode : 2/XA - Character set : ISO 9660 (ISO normal CD-ROM) - No multi session - Write Speed: Low Finalize the discs. (The application may do this automatically.
PAGE 3
Philips V&MA Software Improvements Firmware Version V03_09 Release Date Mar 13 2008 This upgrade software improves the following performance: • Update multi-language message strings • Adjust root menu/title menu positions.