DVDR3475/37 Connections User Manual T ARRÊ ALTO Basic Setup STOP Introduction DIGITAL VIDEO DISC RECORDER Recording Playback Editing Function Setup Others E7E4AUD.
PRECAUTIONS Return your Product Registration Card or register online at www.philips.com/welcome today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.
PRECAUTIONS Read before operating equipment Editing Function Setup Example of Antenna Grounding as per NEC - National Electric Code GROUND CLAMP Playback Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
PRECAUTIONS Welcome! This product lets you record on DVD and playback DVD/CD of various kinds. Read this user manual carefully to learn how to use the features described in this manual. Safety Precautions Warning: To prevent fire or shock hazard, do not expose this device to rain or moisture. Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this device void the user’s authority to operate it. • Do not stand the unit up vertically.
PRECAUTIONS Supplied Accessories Installation Location user manual quick start guide User Manual Servicing Cleaning discs Cleaning the disc lens Disc handling HDMI, the HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Dolby Digital Recording “Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs.
CONTENTS Introduction Recording PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Symbols Used in this User Manual . . . . . . . . . . . . . . . . . . .8 FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONTENTS Introduction Playback Editing 42 44 44 45 Recording Function Setup LIST OF SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FEATURES This unit not only plays back DVD and CD but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit. Recording This unit is compatible with DVD+RW/DVD-RW, which is rewritable repeatedly and DVD+R/DVD-R, which is available for recording once. You can choose either one for your convenience. Even if you choose DVD-RW/-R, these discs will automatically be recorded in the DVD+VR mode.
FUNCTIONAL OVERVIEW 1 2 3* 4 5 6* 7 Introduction Front Panel 8 3475 (*) The unit can also be turned on by pressing these buttons. 11 10 9 8. RECORD button Press once to start a recording. Press repeatedly to start one-touch timer recording. 9. DV-IN jack (E3) Use to connect the DV output of external device with a DV cable. 10. AUDIO input jacks (E2) Use to connect external device with a RCA audio cable. 11. VIDEO input jack (E2) Use to connect external device with a RCA video cable. 12.
FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control. 1 Open the cover. 2 Insert batteries. Using a Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
FUNCTIONAL OVERVIEW (*) The unit can also be turned on by pressing these buttons. Basic Setup Recording Playback Editing Function Setup Others EN E7E4AUD.indd 11 Connections 20. OPEN/CLOSE A button* Press to open or close the disc tray. 21. TITLE button Press to display the title list. 22. SETUP button • Press to display the main menu. • During DVD playback, press and hold for more than 3 seconds to switch the progressive scanning mode to the interlace mode. 23.
FUNCTIONAL OVERVIEW Front Panel Display 2 1 PM DTV 3 4 3. Current status of the unit 1. : Appears in the afternoon with the clock display. 2. Title / track / file and chapter mark : Appears when indicating a title / track / file number. : Appears when indicating a chapter number. : Appears when playback is paused. : Appears when playing back a disc. : Appears when the timer programming or OTR has been set and is proceeding. : Flashes when all timer recordings have been finished. 4.
CONNECTION TO AN EXTERNAL TUNER rear of your TV 2 Disconnect the power cords of the devices from the AC outlet. Disconnect disconnect or RF coaxial cable Cable TV company ANT. IN Connections 1 2 Introduction This section describes how to connect this unit to an external tuner such as cable/satellite box. • When you change the connections, all devices shouldVHF be/ UHF turned off. antenna • Refer to the manual accompanying external devices for more information.
SETTINGS FOR THE VIDEO INPUT You must let the unit know which video input jack you are using before making a recording. 1 2 3 4 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Video”, then press [OK]. Submenu will appear. Use [K / L] to select “Video Input”, then press [OK]. Use [K / L] to select desired external input position, then press [OK].
CONNECTION TO A TV analog audio AUDIO IN R Method 2 Method 3 standard picture good picture better picture S-VIDEO IN VIDEO IN L COMPONENT VIDEO IN Y (Green) PB/CB (Blue) PR/CR RCA audio cable and or or component video cable (Green) this unit VIDEO OUT VIDEO OUT L VIDEO IN (Red) S-video cable VIDEO OUT Y L Y L OUT PB/CB (Blue) PB/CB S-VIDEO HDMI OUT L IN R S-VIDEO AV OUT Recording (Red) R AV IN Basic Setup RCA video cable Connections TV Method 1 Introduction
CONNECTION TO A TV WITH AN HDMI COMPATIBLE PORT A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) connector allows digital transfer of the digital images of DVD-video and other devices. Method 4 best picture TV HDMI IN HDMI cable this unit HDMI OUT When connecting with an HDMI cable, the audio signal will be output as the digital audio signal simultaneously, so you do not need the analog audio connection described on page 15. Cables not included.
CONNECTION TO A TV WITH AN HDMI COMPATIBLE PORT Actual Output Modes by Media Dolby Digital DVD-video LPCM DivX® MP3 / MP2 Actual output PCM 2channel PCM Stream Dolby Digital PCM Stream 2channel PCM PCM 2channel PCM Stream Dolby Digital PCM Stream Connections Dolby Digital Dolby Digital setting of this unit Introduction Audio recording format of the disc 2channel PCM Basic Setup For audio CD, video CD, and MP3 / Windows Media™ Audio files, 2 channel PCM will be output regardless of the
CONNECTION TO AN AUDIO SYSTEM 2 Channel Analog Audio Connection Digital Audio Connection stereo system Dolby Digital decoder, MD deck or DAT deck AUDIO IN R L COAXIAL audio analog audio input jacks digital audio coaxial input jack RCA audio cable digital audio coaxial cable this unit VIDEO OUT L VIDEO IN VIDEO OUT VIDEO IN Y L Y L HDMI OUT PB/CB COAXIAL HDMI OUT L R DIGITAL AUDIO OUTPUT PCM / BITSTREAM R IN AV IN VIDEO OUT PB/CB L R S-VIDEO AV OUT COAXIAL IN DIGITAL AUDIO
GUIDE TO ON-SCREEN DISPLAYS AND MENUS On-Screen Display / Menu The on-screen display changes in the following order as you press [INFO]. Disc Information / Menu 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video Disc Information/Menu 5 1 2 SP(2Hr) 4 1:53 3 * This is an example screen only for explanation. 1. Indicates a disc type and format mode. 2. Indicates the selected external input position. 3. Indicates a recording mode and possible recording time left.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS Title/File Name Information HDMI Information Title Name Information 1 2 Title Name Video Info. : Audio Info. : My Title 480p Bitstream YCbCr 1 3 File Name Information File Name My File 1 1. Displays title/file name. Windows Media™ Audio Tag Information Artist Name 1 4 * This is an example screen only for explanation. 1. Indicates the resolution of the HDMI output image. 2. Indicates the HDMI video format. 3. Indicates the HDMI audio format. 4.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [OK] to display the menu. These menus provide entries to all main functions of the unit. Setup General Setting Timer Programming Title List Disc Edit CD Playback Mode Basic Setup General Setting Menu 1. Playback: To set up the unit to play back discs as you prefer. 2. Display: To set up the OSD screen as you prefer. 3. Video: To set up the video setting. 4.
INITIAL SETTING You need to follow these steps when you turn on this unit for the first time. 1 2 Press [STANDBY-ON y]. Turn the TV on. Select the input to which the unit is connected. Use [K / L] to select your desired language, then press [OK] to set language. Initial Setup OSD Language English Français Español 3 Press [OK] to activate “Clock Setting”. Initial Setup Clock Setting --- / -- / ---- (---) -- : -- -- 4 22 E7E4AUD.indd 22 Proceed to step 5 in “Clock Setting” on page 23.
SETTING THE CLOCK Introduction Set the clock before you try the timer programming. Clock Setting “General Setting” menu will appear. Connections Use [K / L] to select “Clock”, then press [OK]. Use [K / L] to select calendar or time, then press [OK]. General Setting Playback Display Video Clock Setting Recording JAN / 01 / 2007 ( MON ) Clock 12 : 00 AM DivX HDMI Reset All Basic Setup 1 2 3 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK].
INFORMATION ON DVD RECORDING Before you make a recording, read the following information. Recordable Discs Recording Mode This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only be recorded to once. DVD+RW/ DVD-RW can be recorded to and erased many times. DVD-RW/-R will be recorded in the DVD+VR mode automatically in this unit. Logo You can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows.
BEFORE RECORDING Setting for Auto Chapter Introduction Make Recording Compatible You can set a specified time for chapter marks. 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2) Use [K / L] to select “Recording”, then press [OK]. “Recording” menu will appear. 3) Use [K / L] to select “Auto Chapter”, then press [OK]. 2) Use [K / L] to select “Recording”, then press [OK]. “Recording” menu will appear.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING Follow the steps to record TV programs from an external tuner. This unit has no tuner system so cannot receive TV broadcasts without external tuner or such devices. 1 2 Press [STANDBY-ON y]. Turn on the TV and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. Align the disc to the disc tray guide. * Make sure the disc is compatible with this unit.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING 7 Press [STOP C] to stop recording. Introduction 6 Press [REC I] to start recording. “I” will be displayed for 5 seconds. The recorded title will appear in the title list. (Refer to “Guide to a Title List” on page 60.) e.g.) DVD+R Connections I Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC I] again to restart recording. Finalize the recordings so that the disc can be played on regular DVD players.
TIMER RECORDING You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure • Connect the external tuner to either E1 or E2 and set it to output audio/video signals when it comes to the time you want to start recording. • Do not change the external tuner’s channel while you are recording. You cannot watch one channel and record another at the same time. • Set the clock before setting a timer programming.
TIMER RECORDING Timer Programming Auto recording mode select... When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program.
TIMER RECORDING Checking, canceling, or correcting the timer programming information 1) Press [STANDBY-ON y]. If the timer program did not complete correctly, the error number appears in the timer programming list. 2) Press [TIMER]. Timer Programming 3) Check the information on the list you will need.
TIMER RECORDING Basic Setup Recording The Priority of Overlapped Settings • Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over the programs with the later start time when timer programs overlap. • When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off. • When two or more timer programs have the same start time, the program set first will be given priority.
OVERWRITING UNNECESSARY TITLE Overwriting from the Beginning of the Title You can overwrite the existing title from the beginning. 1) Press [STANDBY-ON y]. Make sure that the TV input is set on the unit. 2) Load the disc that includes a title to be overwritten. It takes a while to display the title list. Title list will appear. If the title list does not appear, press [TITLE]. 3) Press [REC MODE] to select a recording mode. Refer to “Recording Mode” on page 24.
OVERWRITING UNNECESSARY TITLE When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion please check if there is no important title after the overwriting point.
EXTERNAL DEVICE RECORDING Connection to an External Device Connect the external device properly to either E2 (front) or E1 (rear) input jacks of this unit by using S-video or RCA audio / video cables. If you are connecting a DV-camcorder, connect it to E3 (front) by using DV cable. or S-VIDEO OUT VIDEO OUT AUDIO OUT R L DV-OUT VIDEO OUT external device AUDIO OUT R L S-VIDEO OUT (camcorder, VCR etc.
EXTERNAL DEVICE RECORDING Before recording from an external device, refer to the instructions for the connection on page 34. It takes a while to load the disc. Select the input of the unit which the external device is connected. (E2, E3 or E1) • To use the input jacks on the rear of this unit; Select “E1 (Rear)” position by using [SOURCE]. • To use the input jacks on the front of this unit; Select “E2 or E3 (Front)” position by using [SOURCE]. Playback Refer to “Recording Mode” on page 24.
DV DUBBING Guide to DV and On-Screen Display This function helps you to easily dub the contents of the DVC (digital video camcorder) to DVD. You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is compliance with the IEEE1394 standards.
DV DUBBING Before recording from DVC, see page 34 for connection instructions. Introduction DVC to DVD Dubbing Insert a recordable media and make sure your DV camcorder is in video mode. 2 3 4 Press [REC MODE] to select a recording mode. Connections 1 Use [SOURCE] to select “E3 (DV-IN)”. E3 (DV-IN) AB-1234 0:00:00 Basic Setup (Refer to page 24.) Recording Press [INFO]. Press [OK] to display the item selection. Use [K / L] to select “DV Input”, then press [OK].
DV DUBBING 5 6 7 Press [PLAY B] to find the point where you wish to start dubbing. Then, press [STOP C] where you wish to start dubbing. Use [K / L] to select “Start Rec”, then press [OK]. The dubbing will start. To stop dubbing; Use [K / L] to select “Control”, then press [OK]. Use [K / L] to select “DVD”, then press [OK]. Then press [STOP C].
SETTING A DISC TO PROTECT Press [SETUP]. Use [K / L] to select “Disc Edit”, then press [OK]. Connections 1 2 3 Introduction To prevent accidental recording, editing or erasing the titles, you can protect them from “Disc Edit” menu. Use [K / L] to select “Disc Protect OFF ON”, then press [OK]. e.g.) DVD+RW Disc Edit Basic Setup Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON Recording 4 Use [K / L] to select “Yes”, then press [OK].
PLAYING THE DISCS ON OTHER DVD PLAYERS Finalizing a Disc You will need to finalize DVD+R, DVD-RW or DVD-R to play them back on other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. 1 2 3 4 Press [SETUP]. Use [K / L] to select “Disc Edit”, then press [OK]. “Disc Edit” menu will appear. Use [K / L] to select “Finalize”, then press [OK].
PLAYING THE DISCS IN OTHER DVD PLAYERS You can finalize discs automatically using this function. You can use this function to finalize discs after finishing all timer recordings and at the end of the disc space. “General Setting” menu will appear. Use [K / L] to select “Recording”, then press [OK]. “Recording” menu will appear. Use [K / L] to select “Auto Finalize”, then press [OK]. Use [K / L] to select “Disc Full” or “End of Timer Rec”, then press [OK].
INFORMATION ON PLAYBACK Before you play back DVD, read the following information. Playable Discs and Files This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos will play back on the unit. Other disc types are not guaranteed to play back.
INFORMATION ON PLAYBACK PBC (playback control) for Video CD DVD-video title 1 chapter 1 chapter 2 track 1 chapter 1 title 2 chapter 2 audio CD, video CD track 2 track 3 track 4 chapter 3 track 5 MP3, Windows Media™ Audio, JPEG folder 1 folder 2 file 1 file 2 file 3 file 4 Basic Setup • PBC setting turns to “ON” when loading video CD with PBC function, thus, even after setting PBC to “OFF” and ejecting the video CD then reloading the video CD, this setting turns to “ON” automatically.
BASIC PLAYBACK Direct Playback 1 2 Press [STANDBY-ON y]. Turn on the TV and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. Align the disc to the disc tray guide. * Make sure the disc is compatible with this unit. (Refer to page 42 for the list of compatible discs.) 3 4 5 Press [OPEN/CLOSE A] to close the disc tray. It may take a while to load the disc completely. Press [PLAY B] to start playback.
BASIC PLAYBACK Press [STANDBY-ON y]. Turn on the TV and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. Basic Setup Align the disc to the disc tray guide. Press [OPEN/CLOSE A] to close the disc tray. Recording * Make sure the disc is compatible with this unit. (Refer to page 42 for the list of compatible discs.
BASIC PLAYBACK 4 Use [K / L] to select a desired title, then press [OK]. 1 SP (2Hr) 5 NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 Use [K / L] to select “Play”, then press [OK].
BASIC PLAYBACK 3 Use [K / L] to select a desired folder or track/file, then press [OK]. e.g.) File list Introduction Playing Back an Audio CD and a CD-RW/-R with MP3/Windows Media™ Audio/JPEG Files File List DISC NAME Connections A B 1 2 3 4 5 6 JPEG file1 JPEG file2 MP3 file1 MP3 file2 WMA file1 WMA file2 1/ 2 Function Setup Note Others • The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck. • Files whose extension is other than “.mp3(MP3)” “.
BASIC PLAYBACK Playing Back a DivX® 1 2 Follow steps 1 to 2 in “Direct Playback” on page 44. Press [OPEN/CLOSE A] to close the disc tray. It may take a while to load the disc completely. File list will appear automatically. • To exit the file list, press [STOP C]. • To resume the file list, press [TITLE]. 3 Use [K / L] to select the desired folder or file, then press [OK]. File List DISC NAME Folder1 Folder2 1 DivX File1 2 DivX File2 When selecting file: Playback will start.
BASIC PLAYBACK ® E7E4AUD.indd 49 Others EN Function Setup • To utilize this function, the following conditions must meet. – “DivX Subtitle” must be activated in “DivX” menu. (Refer to “DivX Subtitle” on page 83.) – Playback file and the subtitle file must have the same name. – Playback file and the subtitle file must locate in the same folder. – Only the subtitle files with the following extensions are supported; .smi (.SMI), .srt (.SRT), .sub (.SUB), .ass (.ASS), . ssa (.SSA), .txt (.TXT). (.sub (.
BASIC PLAYBACK Using the Title / Disc Menu Pause 1) During playback, press [PAUSE F]. Playback will be paused and sound will be muted. DVD or video CD with PBC function may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc. 1) Press [TITLE] or [DISC MENU] to call up the title list or disc menu. 2) Use [K / L / { / B] to make a selection, and then press [OK] to enable your selection. 3) Press [STOP C] to exit.
SPECIAL PLAYBACK Introduction Resume Playback Note You can play back from where you stopped playing back the disc last. 1) During playback, press [STOP C]. The resume message will appear. Note Fast Forward / Fast Reverse Playback You can skip TV commercials to enjoy the recorded programs without interrupting. During playback, press [SKIP]. Normal playback will start at 30 seconds ahead from the point you press [SKIP].
SPECIAL PLAYBACK Rapid Playback Rapid playback function is available only during playback. This function is available only on discs recorded in the Dolby Digital format, and plays back in a slightly faster/ slower speed while keeping the sound quality just as normal playback. 1) During playback, press [RAPID PLAY]. B Press [RAPID PLAY] once during playback. Plays back approximately at 0.8 times of normal playback. : B : Press [RAPID PLAY] twice during playback. Plays back approximately at 1.
SPECIAL PLAYBACK 1) During playback, press [INFO] or [ZOOM]. 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video 1) During playback, press [INFO]. , then press [OK] within 1 2) Use [{ / B] to select second or wait for 1 second to display the marker list. e.g.) DVD-video 1/ 5 Basic Setup 1/ 5 0:01:00 / 1:23:45 DVD Video 3) Use [K / L] to select a desired zoom factor to zoom, then press [OK]. 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video 3) Use [K / L] to select a desired marker number.
SEARCH Title / Chapter Search Track Search Using [PREV ] / [NEXT ] Using [PREV ] / [NEXT ] 1) During playback, press [NEXT ] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. • If there is no chapter in one title, the current title will be skipped. 1) During playback, press [NEXT ] to skip the current track/file and move to the next. The track/file will move forward one at a time.
SEARCH Introduction Time Search 1) During playback, press [INFO]. 1/ 5 1/ 5 Connections , then press [OK]. 2) Use [{ / B] to select e.g.) DVD-video 0:01:00 / 1:23:45 DVD Video 1/ 5 Basic Setup e.g.) audio CD 0:00:15 / 0:05:00 CD When time search is not available, counter are not displayed. Recording The number next to will be highlighted. To move to the number next to , press [B]. and time 3) Use [K / L / { / B] or [the Number buttons] to enter a desired time to search, then press [OK].
REPEAT / RANDOM / PROGRAM PLAYBACK / SLIDE SHOW Repeat Playback Note Available repeat function may vary depending the discs. 1) During playback press [INFO], then proceed to step 2), or press [REPEAT] then proceed to step 3). 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video 3) Use [K / L] to select a desired option to repeat, then press [OK]. e.g.
REPEAT / RANDOM / PROGRAM PLAYBACK / SLIDE SHOW Slide Show You can select the display time between 5 seconds and 10 seconds. 1) Press [SETUP]. 1) Follow steps 1 and 2 in “Random Playback” on page 56. 2) Use [K / L] to select “CD Playback Mode”, then press [OK]. “CD Playback Mode” menu will appear. 3) Use [K / L] to select the display time, then press [OK]. Basic Setup 3) Use [K / L] to select “Program Play”, then press [OK]. 2) Use [K / L] to select “Slide Show”, then press [OK].
SELECTING THE FORMAT OF AUDIO AND VIDEO You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack DVD-video may have subtitles in 1 or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages anytime during playback.
SELECTING THE FORMAT OF AUDIO AND VIDEO You can enjoy stereophonic virtual space through your existing 2 channel stereo system. 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. e.g.) DVD-video 1/ 5 1/ 5 Some DVD-video have scenes shot from 2 or more angles. Angle information should be on the disc case if the disc contains multi-angle scenes. 1) During playback, press [INFO]. 2) Use [{ / B] to select e.g.
INFORMATION ON DISC EDITING Guide to a Title List Editing Discs Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [TITLE].
EDITING DISCS 3 Use [K / L] to select “Edit”, then press [OK]. Play Edit Overwrite SP (2Hr) 1 NOV/21/07 11:00AM E1 SP NOV/21/07 0:20:44 Connections You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back to the disc. For DVD+RW/DVD-RW, when the last recorded title in the title list is deleted, the available disc space to record on will be increased. For DVD+R/DVD-R, the disc space to record on will not be changed.
EDITING DISCS Putting Names on Titles You can put title names on the titles and change the names from this menu. 4 Use [K / L] to select “Yes”, then press [OK]. Edit - Edit Title Name 1 Yes No MY FAVORITE 0:00:59 The name you entered will be activated for the title. 5 After this operation is completed, press [BACK ] to exit. Data will be written onto the disc momentarily. This operation may take a while to be completed.
EDITING DISCS You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. Introduction Setting Chapter Marks Submenu will appear. Press [PLAY B] and then [PAUSE F] to decide the point at which you will create a new chapter mark. • It is convenient to use [PREV ], [NEXT ], [REW E] and [FFW D] for finding the point to add a new chapter mark.
EDITING DISCS Clearing Chapter Marks 1 2 3 4 5 Follow steps 1 to 3 in “Deleting Titles” on page 61 to display “Edit” menu. Use [K / L] to select “Chapter Mark”, then press [OK]. Submenu will appear. Use [PREV ] / [NEXT ] to select a chapter mark to be deleted. Use [K / L] to select “Delete”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. Edit - Chapter Mark - Delete 1 Yes No Chapter 2/ 2 F NOV/21/07 11:00AM E1 SP 0:00:59 The selected chapter mark will be deleted.
EDITING DISCS Introduction Clearing Chapter Marks (cont’d) To delete all chapter marks: Use [K / L] to select “Chapter Mark”, then press [OK]. Connections Submenu will appear. Basic Setup Use [K / L] to select “Delete All”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. Edit - Chapter Mark - Delete All 1 Yes No Chapter Recording 1 2 3 4 Follow steps 1 to 3 in “Deleting Titles” on page 61 to display “Edit” menu. 2/ 2 F 0:00:59 5 Use [K / L] to select “Yes”, then press [OK].
EDITING DISCS Hiding Chapters You can hide chapters from the title list. Hidden chapters are skipped during playback. 1 2 3 4 Follow steps 1 to 3 in “Deleting Titles” on page 61 to display “Edit” menu. Use [K / L] to select “Hide Chapter”, then press [OK]. Submenu will appear. Use [PREV ] / [NEXT ] to decide the chapter to be hidden. Use [K / L] to select “Hidden”, then press [OK].
EDITING DISCS You can set your desired scene as a thumbnail for each title. Follow steps 1 to 3 in “Deleting Titles” on page 61 to display “Edit” menu. Use [PREV ], [NEXT ], [REW E], [FFW D], [PAUSE F] and [PLAY B] to decide the picture you want to select as a thumbnail. Connections Use [K / L] to select “Index Picture”, then press [OK]. Use [K / L] to select “Yes”, then press [OK].
EDITING DISCS Dividing a Title You can divide one title into 2 new titles. 1 2 3 4 Follow steps 1 to 3 in “Deleting Titles” on page 61 to display “Edit” menu. Use [PREV ], [NEXT ], [REW E], [FFW D], [PAUSE F] and [PLAY B] to decide the point at which you will divide the title. Use [K / L] to select “Title Dividing”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. Edit - Title Dividing 1 Yes No F NOV/21/07 11:00AM E1 SP 0:00:59 The title will be divided into 2 new titles.
EDITING DISCS You can put a name on the disc and change it from this menu. Introduction Putting Name on Disc Press [STOP C] if you are playing back a disc. Use [K / L] to select “Disc Edit”, then press [OK]. Basic Setup Use [K / L] to select “Edit Disc Name”, then press [OK]. e.g.) DVD+RW Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON Edit Disc Name A B C a b c Recording A window for entering a title name will appear. No Disc Name Connections 1 2 3 Press [SETUP].
EDITING DISCS Setting or Releasing Disc Protect To prevent accidental editing, or erasing the titles, you can protect them. 1 2 Follow steps 1 to 2 in “Putting Name on Disc” on page 69 to display “Disc Edit” menu. Use [K / L] to select “Disc Protect OFF ON”, then press [OK]. e.g.) DVD+RW Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON • If the disc is already protected, “Disc Protect ON OFF” will appear instead of “Disc Protect OFF ON”.
EDITING DISCS You can erase all titles on a disc. Introduction Erasing Disc Press [STOP C] if you are playing back a disc. Use [K / L] to select “Erase Disc”, then press [OK]. e.g.) DVD+RW Disc Edit Basic Setup Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON Use [K / L] to select “Yes”, then press [OK]. Recording 3 Connections 1 2 Follow steps 1 to 2 in “Putting Name on Disc” on page 69 to display “Disc Edit” menu.
EDITING DISCS Making Edits Compatible If you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” to see those effects on other unit. Press [STOP C] if you are playing back a disc. 1 2 Follow steps 1 to 2 in “Putting Name on Disc” on page 69 to display “Disc Edit” menu. 3 Use [K / L] to select “Yes”, then press [OK]. Use [K / L] to select “Make Edits Compatible”, then press [OK].
LIST OF SETTINGS Setup Items (highlight is the default) Playback Parental Lock Pages 75-78 Disc Audio Dynamic Range Control PCM Disc Menu Language Subtitle Language Display OSD Language Pages 79-80 Screen Saver FL Dimmer Set to the progressive scan mode (set to "ON") or to the interlace scan mode(set to "OFF"). Set a picture size according to aspect ratio of your TV. Set the video input type for the external input. Insert chapter marks at even time interval.
LIST OF SETTINGS Setup DivX Page 83 Items (highlight is the default) DivX®VOD DivX Subtitle HDMI Format Pages 84-85 HDMI Audio RGB Range Reset All Page 86 OFF English French Spanish German Italian Swedish Dutch Russian1 Russian2 Hungarian Polish Czech Contents Provide DivX®VOD registration code. Set the language for DivX® Subtitle. RGB YCbCr Set the color space for the HDMI output. ON OFF Normal Enhanced Yes No Set whether or not to output the HDMI audio signal.
SETUPS Introduction Playback Press [STOP C] if you are playing back a disc. 3 Use [K / L] to select a desired item, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Playback”, then press [OK]. General Setting Basic Setup Playback Display Video Recording Clock DivX HDMI Reset All Recording Parental Lock Disc Audio Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode Playback 1 2 3 4 5 6 7 Submenu will appear.
SETUPS Playback (cont’d) 1 Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. Use [K / L] to select the desired level, then press [OK].
SETUPS 2 C Disc Audio Choose the appropriate audio setting for your external device. It will only affect a disc playback. Use [K / L] to select a desired item, then press [OK]. Playback Display Video Recording Clock DivX HDMI Reset All Use [K / L] to select a setting, then press [OK].
SETUPS Playback (cont’d) 3 Disc Menu Language (Default : English) Set the language for disc menu. Use [K / L] to select a setting, then press [OK]. General Setting Playback Display Video Recording Clock DivX HDMI Reset All Parental Lock Out Disc Menu Audio Language Disc Menu Language EnglishAudio Language FrenchSubtitle Language Spanish Angle Icon Other Still Mode • Only the languages supported by the disc can be selected. • Audio language setting may not be available to some discs.
SETUPS Introduction Display Press [STOP C] if you are playing back a disc. Connections Use [K / L] to select “Display”, then press [OK]. Use [K / L] to select a desired item, then press [OK]. Basic Setup 1 2 3 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. 1 OSD Language 2 Screen Saver 3 FL Dimmer Selection menu will appear. Recording When you finish with setting, press [SETUP] to exit. Playback 4 5 Refer to 1 to 3 on page 80 and set the selected item.
SETUPS Display (cont’d) 1 OSD Language (Default : English) Set the language for the on-screen display. Use [K / L] to select a setting, then press [OK]. General Setting Playback Display Video Recording Clock DivX HDMI Reset All OSD Language Screen Saver OSD Language FL Dimmer English Français Español Your setting will be activated. 2 Screen Saver (Default : 10 minutes) Set the time to activate the screen saver function on the TV screen. Use [K / L] to select a setting, then press [OK].
SETUPS Introduction Video Press [STOP C] if you are playing back a disc. Connections Use [K / L] to select “Video”, then press [OK]. Use [K / L] to select a desired item, then press [OK]. Basic Setup 1 2 3 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. 1 Progressive Scan 2 TV Aspect 3 Video Input Submenu will appear. Playback When you finish with setting, press [SETUP] to exit. Recording 4 5 Refer to 1 to 2 on page 82 and set the selected item.
SETUPS Video (cont’d) 1 Progressive Scan (Default : OFF) This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”. 1) Use [K / L] to select “ON“, then press [OK].
SETUPS “General Setting” menu will appear. Use [K / L] to select “DivX”, then press [OK]. Use [K / L] to select a desired item, then press [OK]. Basic Setup 1 DivX R VOD 2 DivX Subtitle Refer to 1 and 2 on this page and set the selected item. Recording 1 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Connections 1 2 3 4 5 Introduction DivX® When you finish with setting, press [SETUP] to exit. DivX® VOD Editing General Setting Note 2 To learn more visit www.
SETUPS HDMI 84 E7E4AUD.indd 84 1 2 3 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. 4 5 Refer to 1 to 3 on page 85 and set the selected item. “General Setting” menu will appear. Use [K / L] to select “HDMI”, then press [OK]. Use [K / L] to select a desired item, then press [OK]. 1 Format 2 HDMI Audio 3 RGB Range When you finish with setting, press [SETUP] to exit.
SETUPS 1 Introduction HDMI (cont’d) Format (Default : RGB) Connections You can select the color space for HDMI output. Set the appropriate color space for your display device. Use [K / L] to select a setting, then press [OK]. • When the connected device is not compatible with the Y/Cb/Cr, HDMI signal is output as RGB regardless of the setting.
SETUPS Reset All Reset the setting to default. 1 2 3 4 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Reset All”, then press [OK]. Select “Yes” using [K / L] , then press [OK]. General Setting Playback Display Video Recording Clock DivX HDMI Reset All Reset to factory default? Yes No Select “Yes” again using [K / L] , then press [OK].
TROUBLESHOOTING Symptom Power The power does not turn on. • Check that the AC power cord is connected securely. • Check the breaker (in case of power failure). • Clean the disc with a cleaning cloth. Playback picture from the external devices connected to this unit is distorted. • If the picture output signal from the external devices passes through this unit to get to your TV, the copy protection signal applied to some DVD could affect the picture quality.
TROUBLESHOOTING Symptom Playback The disc does not play back. Remedy • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play back certain discs (such as a CD-ROM) (page 42). • The region code on the DVD-video does not match the unit (page 42). • Moisture has condensed inside the unit.
TROUBLESHOOTING Remedy Certain functions of the unit cannot operate. • Some functions may not operate depending on the type of DVC. For example, if the DVC does not support slow playback mode, the slow playback function is disabled. • With E3(DV-IN), the disc display menu does not appear unless disc playback is executed. DV audio signal cannot be switched. • For recording with the DVC, the recording audio signal can be set to 12 bits or 16 bits.
TROUBLESHOOTING Error message Cause Solution Disc Error — Please eject the disc. — Playback feature may not be available on this Disc. • Unplayable disc is inserted in the unit. • The disc is upside down. • Insert the standardized disc which bear the marks on page 42. • Insert the disc with the labeled side facing up. Region Error — Please eject the disc. — Playback is not authorized in your region. • Playback is not authorized in the region of the DVD-video which you inserted in the unit.
TROUBLESHOOTING Introduction Frequently Asked Questions – Can I play back DVD-video that is bought in another country? Possible when the region code of the disc is 1 and All. – Can I connect the unit to my PC? No, you cannot control the unit by PC. – Can I program a timer recording with an external tuner? Yes, you can. Select “E1” or “E2” as your recording channel, and leave the external tuner on (pages 13, 2831).
LANGUAGE CODE Language Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi 92 E7E4AUD.
GLOSSARY PBC (playback control) (video CD only) An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. This function enables you to play back interactive software using a menu screen. See also “Video CD”. Aspect Ratio Chapter Just as a book is split up into several chapters, a title on a DVD is usually divided into chapters. See also “Title”.
SPECIFICATIONS General System Power requirements Power consumption Dimensions (width x height x depth) Weight Operating temperature Operating humidity Recording Recording format Recording discs Video recording format Sampling frequency Compression format Rear Front Audio recording format Sampling frequency Compression format Terminals Audio input RCA jack x 2 Video input RCA jack x 1 S-video input Mini DIN 4-pin x 1 DV input DV 4-pin jack x 1 Audio input RCA jack x 2 Audio output RCA jack x 2 Video input
LIMITED WARRANTY WARRANTY COVERAGE: PHILIPS warranty obligation is limited to the terms set forth below. Others Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. Function Setup REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER.
PHILIPS CONSUMER ELECTRONICS Philips Consumer Electronics Company A Division of Philips Electronics North America Corp GA 30006-0026 P.O. Box Marietta, 671539 Marietta, GA 30006 00296 Meet Philips at the Internet http://www.philips.com/welcome HTS6600 DVDR3475/37 CLASS 1 LASER PRODUCT 3139 300 245 25683 8239 55584 Printed in China JpnCN-0721/37-3 1VMN23516A ** E7E4AUD E7E4AUD.
