User Guide

English
38
About timer recording
Use ‘Timer Recording’ to automatically
start and stop a recording at a later date/
time. The recorder will tune to the right
program channel and begin recording at
the speci ed time.
With this recorder, you can pre-program
up to 20 recordings.
To make a timer recording, your
recorder needs to know:
– The date you want to make the
recording.
– The recording input source.
– The start and stop time of the
recording.
– The mode of record quality, see
“Before Recording – Default
Recording Settings.”
CH
CH
SELECT
TIMER
OK
Timer recording (G-CODE
®
System)
This is a simple programming system for
recorders. To use it, enter the G-
CODE
®
programming number associated with
your television program. You can  nd
this number in your TV listings magazine.
All the information needed by the
recorder for programming is contained in
the programming number.
A
Turn on the TV power. Select the
correct Video In channel at the TV.

If you are recording directly to a
DVD disc, insert the DVD recordable
disc before proceeding to step
B
.
B
Press TIMER on the remote control.
 The timer schedule list appears.
1
2
3
4
5
6
Sourc
e
R
ec
M
ode
D
a
t
e
Star
t
En
d
R
ec
T
o
Timer Schedule
C
Use ST keys to highlight the next
available empty slot and press OK.
 The G-CODE
®
. System setup menu
appears.
Please enter the programming
number for your recording. Select
MANUAL for manual timer
recording. Press [BACK] to go
to the timer list
OK
CONFIRM
OK
MANUAL
G-CODE System
TIPS: Set the appropriate mode of record quality for HDD recording, the same record quality will be transferred
from HDD to a recordable DVD.
Timer Recording