Software Upgrade

Table Of Contents

Philips V&MA

DVDR3380_EU Firmware Upgrade

Firmware Upgrade

We have developed a firmware upgrade to improve your product.

This upgrade is applicable for the following models:

DVDR3380/05, DVDR3380/31, DVDR3380/51 and DVDR3380/58.

Note: Before you proceed to upgrade, please be reminded that you need to do configuration again

each time after firmware upgrade!

Upgrade Procedure

Ste

Check your current version

First check your current firmware version to see if you need to upgrade:

1. When TV shows Philips wallpaper, close disc tray with no disc.

2. Press <0>, <0>, <0>, <9>, <OK> on the Remote Control.

Note: In case the firmware version does not appear on the screen, eject and close the disc tray to reset, and

repeat step 2.

3. The software version will be displayed on the TV screen as shown in the example below.

4. Compare your recorder firmware build date shown on screen with this date,

“Feb 23 2007”

5. If your existing firmware build date is earlier than the above date, please proceed to step 2

Otherwise, you do not need to upgrade.

Ste

Download firmware upgrade

Click the link to download the new firmware package on your computer. The package is compressed into a

single ZIP archive: DVDR3380_EU_Feb_23_2007.zip.

Ste

Burning the firmware on CD-R / CD-RW

Tip: For more

information on burning

software we refer to

two popular burning

software programs

www.nero.com

www.easycdcreator.com

Note: You will need one blank CD-R or CD-RW disc for this step.

1. Extract the firmware upgrade files from the ZIP archive:

DVDR3380_D3_EU_V02_08.CUB

DVDR3380_EU_V03_27.CUB

PHILIPS_45040510.BIN

PHILIPS_51050217.BIN

(Do not rename the filenames)

PAGE 1
Philips V&MA DVDR3380_EU Firmware Upgrade Firmware Upgrade We have developed a firmware upgrade to improve your product. This upgrade is applicable for the following models: DVDR3380/05, DVDR3380/31, DVDR3380/51 and DVDR3380/58. Note: Before you proceed to upgrade, please be reminded that you need to do configuration again each time after firmware upgrade! Upgrade Procedure Step 1 Check your current version First check your current firmware version to see if you need to upgrade: 1.
PAGE 2
Philips V&MA 2. 3. Burn ALL the extracted files: “.CUB” and “.BIN” files (not the ZIP file) onto a blank CD-R or CD-RW disc, using the following settings: - File System: ISO 9660 + Joliet - File name length : max11 chars = 8+3 (Level 1) - Mode : 2/XA - Character set : ISO 9660 (ISO normal CD-ROM) - No multi session - Write Speed: Low Finalize the discs. (The application may do this automatically.
PAGE 3
Philips V&MA Firmware upgrade history Firmware Version V02_08 Release Date Apr 05 2007 This upgrade software improves the following performance: • Improve on Missing PDC timer in UK • Fix cannot toggle AUDIO DUAL A or DUAL B on a decoder ON preset Channel • Fix “Track number will skip to the current track number when input the number of the track is searched on CD”. • Fix “DivX subtitile can't be switched when play a DivX file contain Embedded subtitile.