Software Upgrade

Troubleshooting
Symptom
The display shows ‘BAD VERSION ’.
The display shows ‘
SYS UNSUPP ’.
The display shows ‘ERROR ’or ‘ENGINE ERROR ’.
Some of the system settings have changed,
such as the date or language preferences.
Remedy
The system version of your DVD recorder is already
newer than the firmware on the CD-ROM. You
cannot upgrade with this disc.
Upgrading is not supported for this configuration.
Contact your Philips Customer Care Center.
An error occurred during the upgrade procedure. Try
once again. If the problem persists, contact your Philips
Customer Care Center.
Reset the DVD Recorder as follows: Disconnect the
recorder from the mains; reconnect it while holding
the STANDBY/ON button pressed until the display
lights up. You will need to redo the installation
procedure.
3