Digital Video Disc Recorder Owner's Manual DVDR1000 Important! Return your Warranty Registration Card within 10 days. See why inside. Read this manual first! Congratulations on purchasing this Philips product. We’ve included everything you need to get started. If you have any problems, Philips Representatives can help you get the most from your new product by explaining: • Hookups, • First Time Setup, and • Feature Operation. Do not attempt to return this product to the store.
Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Contents 3 General Information Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Information Safety Precautions Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this equipment void the user’s authority to operate it. Laser Safety This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
Safety Information (cont’d) 5 IMPORTANT SAFETY INSTRUCTIONS. READ BEFORE OPERATING EQUIPMENT. 17. Tilt/Stability - All televisions must comply with recommended international global safety standards for tilt and stability properties of cabinet design. • Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product.
Introduction Welcome! Your Philips DVD Recorder both records DVD+RWs and plays prerecorded DVDs. You can record TV programs, edit camcorder recordings, and quickly access your DVD+RW recordings in the Index Picture Screen. Plus, the DVD+RW recordings you make on the Recorder will play on some DVD Players and DVD-ROM drives. You’ll soon appreciate the digital picture and sound quality of DVD and DVD+RW, which will exceed the quality you have had with video cassette tapes.
Playable Discs 7 This DVD Recorder will play various types of Discs. Some Disc types will only play on the Recorder; others will record in the Recorder; some will record and play. There are also a few types of Discs that will neither play nor record on this Recorder. To determine which Discs you should use with this Recorder, refer to the following information. Look for these logos on your Discs to determine whether the Disc will or will not play or record on the Philips DVD Recorder.
General Information Battery Installation 1 2 Remove the battery compartment lid on the rear of the remote control by sliding the lid down, then off. 3 Replace the battery compartment lid. Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated. Do not mix old and new batteries or different types of batteries (standard, alkaline, etc.). Using the Remote Control Unless stated otherwise, the remote control can operate all the features of the DVD Recorder.
Hookups 9 Determining the best possible connection... The capabilities of your existing equipment, especially your TV, will determine your connection possibilities. However, the following guidelines describe which options provide the best picture and sound quality. Component Video provides the best picture quality. Progressive Scan Component Video has the highest quality, but use it only if the TV has Progressive Scan. Details are on page 10. S-Video provides excellent picture quality.
Hookups (cont’d) Connecting to a TV Only TV has Component Video In Jacks Back of TV (example only) 2 Y Cb/B-Y RIGHT AUDIO IN LEFT AUDIO IN Cr/R-Y Y RIGHT AUDIO IN Pb/Cb Antenna or Cable TV Signal LEFT AUDIO IN Pr/Cr 4 EXT 3 COMPONENT VIDEO Y Y 3 EXT 3 PROG SCAN Y L PB PB PB PR PR PR L L R R R IN RC 6 EXT 2 EXT 1 EXT 1/2 1 1 2 Connect your Antenna or Cable TV signal to the ANTENNA jack on the rear of the DVD Recorder.
Hookups (cont’d) 11 Connecting to a TV Only TV has an S-Video In Jack Back of TV (example only) RIGHT AUDIO IN LEFT AUDIO IN S-AUDIO IN 2 Antenna or Cable TV Signal RIGHT AUDIO IN LEFT AUDIO IN S-VIDEO IN 4 EXT 3 COMPONENT VIDEO 3 EXT 3 PROG SCAN Y Y Y PB PB PB PR PR PR L L L R R R IN RC 6 EXT 2 EXT 1 EXT 1/2 1 1 2 3 Connect your Antenna or Cable TV signal to the ANTENNA jack on the rear of the DVD Recorder.
Hookups (cont’d) Connecting to a TV Only TV has a yellow CVBS Video In jack Back of TV (example only) RIGHT AUDIO IN LEFT AUDIO IN VIDEO IN RIGHT AUDIO IN LEFT AUDIO IN Antenna or Cable TV Signal VIDEO IN 2 4 EXT 3 COMPONENT VIDEO 3 EXT 3 PROG SCAN Y Y Y PB PB PB PR PR PR L L R R L R IN RC 6 EXT 2 EXT 1 EXT 1/2 1 1 2 Connect your Antenna or Cable TV signal to the ANTENNA jack on the rear of the DVD Recorder.
Hookups (cont’d) 13 Connecting to a TV and a two-channel Stereo (Stereo has Dolby Pro Logic or right/left Audio In jacks) Stereo (example only) Back of TV (example only) S-AUDIO IN RIGHT AUDIO IN Antenna or Cable TV Signal 4 S-VIDEO IN LEFT AUDIO IN 2 EXT 3 COMPONENT VIDEO 3 EXT 3 PROG SCAN Y Y Y PB PB PB PR PR PR L L L R R R IN RC 6 EXT 2 EXT 1 EXT 1/2 1 1 2 3 Connect your Antenna or Cable TV signal to the ANTENNA jack on the rear of the DVD Recorder.
Hookups (cont’d) Connecting to a TV and a Stereo Receiver (Receiver has Dolby DigitalTM, MPEG2, or Digital Theater System) Receiver (example only) Back of TV (example only) S-AUDIO IN Antenna or Cable TV Signal 4 COAXIAL DIGITAL AUDIO IN S-VIDEO IN 2 3 EXT 3 COMPONENT VIDEO EXT 3 PROG SCAN Y Y Y PB PB PB PR PR PR L L L R R R IN RC 6 EXT 2 EXT 1 EXT 1/2 1 1 2 Connect your Antenna or Cable TV signal to the ANTENNA jack on the rear of the DVD Recorder.
Hookups (cont’d) 15 Connecting to Other Equipment (optional) EXT 3 COMPONENT VIDEO EXT 3 PROG SCAN Y Y Y PB PB PB PR PR PR L L R R L R IN RC 6 EXT 2 EXT 1 VIDEO OUT EXT 1/2 RIGHT AUDIO OUT 1 LEFT AUDIO OUT 2 24 • After connecting the Recorder directly to your TV, additional IN jacks will be available on the rear of the Recorder. You may connect other equipment to these jacks, including a Cable Box, Video Cassette Recorder (VCR) or a DVD Player.
Initial Setup Initial Setup screens will appear the very first time you turn on the Recorder. These on-screen messages and menus will help you set up Recorder features quickly, including TV channels and language options. Follow the steps below to set up the Recorder as directed on the TV screen. You can not turn off the Recorder until you finish the Initial Setup. The only way to quit the Initial Setup is to disconnect the power cord.
Initial Setup (cont’d) 17 Continued from previous page 4 The Subtitle Language menu appears next. Press 98 to choose the language you prefer for subtitles, then press OK. The Recorder will automatically show subtitles in the language you selected if subtitles are available in that language on the Disc. If your selected subtitle language is not available, either there will be no subtitles or subtitles will be in the default language of the Disc.
Quick Disc Playback DVD AUDIO CD VIDEO CD DVD+RW 1,2 There are many playback features and options available on Discs. After familiarizing yourself with the DVD Recorder as described on pages 20-27, see pages 28 and following to try additional playback features. 1 2 Press OPEN/CLOSE A on the front of the DVD Recorder to open the disc tray. (You can not open the disc tray using the remote control.) Load your Disc in the tray, with the label facing up.
Quick Recording 19 DVD+RW 1,2 The DVD Recorder can record TV programming onto a DVD+RW. Before you begin, make sure you have installed the TV channels. Details are on pages 16-17 and 36. Using an unprotected, recordable DVD+RW, follow the steps below to record TV channels. For additional recording options, see pages 40-46. 1 2 3 4 5 6 7 Press OPEN/CLOSE A on the front of the DVD Recorder to open the disc tray. Or, press and hold STOP C on the remote control to open or close the Disc tray.
Remote Control Buttons TUNER Button Press to choose disc mode or tuner mode. In disc mode, use the Index Picture Screen, view Disc playback, or make recordings. In tuner mode, watch or record TV channels through the DVD Recorder. Details are on page 19. TUNER REC/OTR STOP STOP C Button Press to stop Disc playback or recording. Press and hold the STOP C button for three seconds to open or close the Recorder’s disc tray.
Remote Control Buttons (cont’d) 21 REVERSE ÉE´ Button Press to search backward, or fast reverse, during playback. Press repeatedly to play the Disc backward at 4 or 32 times the normal speed. Details are on page 32. PREVIOUS w Button Press to return to the beginning of the current Chapter/Track. Or, press repeatedly to return to the beginning of previous Chapters/Tracks. Details are on page 28.
Front Panel STAND BY / ON Button and Light Press the STAND BY / ON button to turn on or off the power of the DVD Recorder. The STAND BY / ON light will be red if the DVD Recorder power is off (standby). The STAND BY / ON light will be green when the power is on. Remote Sensor The sensor receives signals from the remote. Point the remote here, not at your TV, when using the remote control to operate the DVD Recorder.
Display 23 DVD+RW DVD+Rewritable inserted D Remote Control command received DVD DVD inserted TRACK TIME Elapsed playing time of the current Track in hours, minutes, and seconds appears during playback.
Rear Panel MAINS (AC Power) Connect the supplied AC power cord here and to a standard AC outlet after completing all other connections. TV jack If your television only has a 75 ohm or RF coaxial jack, connect the supplied RF coaxial cable to the TV jack on the DVD Recorder and to the RF IN jack on the TV You will need an RF modulator. Details are on page 9. For more information, refer to your TV owner’s manual. IN RC 6 jack Connect a wired remote control (not supplied) to the IN RC 6 jack if you prefer.
Menu Bars 25 In addition to using the shortcut buttons on the remote control to select features, you can use the Menu Bars to operate features. You can not access the Menu Bars during recording. When a Menu Bar is on the screen, press the 98 ; : buttons on the remote control to select an item. The 98; : symbols in the Menu Bar mean more items are available. Press 98 ; : on the remote control to select these items or to change the setting of an item. Menu Bar 1 *Press SYSTEM MENU once to access Menu Bar 1.
On-screen Symbols, Status Box On-screen Symbols The following symbols will appear briefly on the TV screen when you activate some Disc features. scan repeat title chapter Scan The first 10 seconds of each Chapter/Track will play. Details are on page 33. Repeat All The entire Disc will play repeatedly. Details are on page 34. Repeat Title The current Title will play repeatedly. Details are on page 34. 2/2 locked Locked The current Disc is Locked and cannot play. Details are on pages 49-53.
Information Boxes 27 Warning box Appears near the bottom of the screen when appropriate. Examples and details are on page 43. Disc locked Tuner Information box Appears on the left side of the TV screen and identifies the current TV channel or Video source you are watching. For example, if EXT1 appears in the Tuner Information Box, you are viewing or recording the material that is playing on the equipment that is connected to the EXT1 AUDIO and VIDEO IN jacks on the rear of the Recorder.
Title/Disc Menus, Chapter/Track Selection DVD DVD+RW Title/Disc menus 1 Press DISC MENU during Disc playback. For a DVD, if the current Title has a menu, the Title menu will appear on the screen. Otherwise, the Disc menu will appear. The menu may list camera angles, spoken language and subtitle options, and Chapters for the Title. For a DVD+RW, the Index Picture Screen will appear. Details are on page 35.
Audio Language, Subtitles 29 DVD Audio Language CLEAR SELECT TIMER VOL CH Some DVDs are recorded in different languages. For example, you may be able to watch the same movie in French, Spanish, etc. The movie may have special audio features, such as a director’s commentary or music soundtrack. If these are available on the DVD, access the different languages or featured soundtracks by following these steps. 1 2 During DVD playback, press the AUDIO Y button. Y Audio will be selected in the Menu Bar.
Zoom, Camera Angle DVD Zoom VIDEO CD DVD+RW Zooming lets you enlarge the video image during playback and pan through the enlarged image. 1 2 Press ZOOM a during Disc playback. a Zoom will be selected in the Menu Bar. Within five seconds, press 8 or 9 to choose 1.33, 2 or 4. Playback will pause, and the still picture will appear at 1.33, 2, or 4 times the normal size.
Sound, Still Picture/Frame-by-Frame Playback 31 Sound Choose a sound setting based on the capabilities of the equipment to which you connected the DVD Recorder. Details are on pages 9-14 and 57. 1 2 3 TUNER ON/OFF Press SYSTEM MENU. REC/OTR STOP Press : repeatedly to select d. 1,4 2,3 REVERSE PAUSE SLOW FORWARD PREVIOUS Press 89 to select st (stereo), sur (surround), or 3d.
Slow Motion, Forward and Reverse Searching DVD DVD+RW Slow Motion Start slow motion playback simply by pressing the SLOW H button during playback. Press SLOW H repeatedly to play the Disc at 1/2, 1/4, or 1/8 the regular speed. Or, to use the Menu Bar for slow motion, follow the steps below. TUNER 4 REC/OTR STOP REVERSE 1 2 3 ON/OFF PAUSE PLAY SLOW 1,5 FORWARD During Disc playback, press SYSTEM MENU. PREVIOUS Press : repeatedly to select H (Slow motion), then press 9. Playback will pause.
Time Search, Scan 33 DVD+RW DVD VIDEO CD Time Search TUNER Time Search lets you choose a specific time at which you want to begin playback. ON/OFF REC/OTR STOP 1,6 REVERSE 1 2 3 Press SYSTEM MENU during Disc playback. PAUSE PLAY SLOW FORWARD PREVIOUS NEXT 2 EDIT Press : repeatedly to select . Press 9. Playback will pause. A time edit box will appear, showing the elapsed playing time of the current Chapter or Disc.
Repeat, Repeat A-B DVD AUDIO CD Repeat VIDEO CD DVD+RW MUTE You may play a Chapter, Track, Title or entire Disc repeatedly. 1 2 During Disc playback, press REPEAT repeatedly to choose a Repeat option. Depending on the type of Disc, you may choose to play the Chapter, Track, Title, or Disc repeatedly. During DVD, Video CD, or DVD+RW playback, the repeat symbols will appear briefly on the TV screen. Details are on page 26. A DVD+RW will play repeatedly only if the Disc is full of recordings.
Index Picture Screen 35 The Index Picture Screen shows the Titles you have recorded on a DVD+RW. It appears automatically when you stop playback or recording and a DVD+RW is in the Recorder. (The DVD+RW must contain recorded content.) An Index Picture represents each Title. Next to the Index Picture is the program name, length of recording, recording mode/speed, and date of recording.
Installation: Automatic Channel Programming Although the DVD Recorder selects available TV channels during Initial Setup, you may want to repeat the process later if more channels become available in your area. This will erase and replace all previously stored channels. To update the available channels, follow these steps. 1 2 TUNER REC/OTR STOP Press SYSTEM MENU. to select it. ON/OFF PLAY may be selected. If it is not, press ; Press 9 repeatedly to select Installation menu.
Installation: VCR Plus+ Ch. 37 If you intend to use the VCR Plus+ programming system, program the DVD Recorder with your local channel information. This will only take a few minutes. Since the channel numbers of the stations you receive may not be the same as the station numbers, and since channel numbers differ from area to area, you must set up channels in order for the system to work efficiently.
Installation: Clock Setting Time/Date Automatic The Recorder can set the time and date automatically by referring to your local PBS station. If the Recorder chooses an incorrect PBS channel or sets the time/date incorrectly, you can set the information manually. Details are on page 39. Before you begin, make sure TV channels are set. Details are on page 36. TUNER REC/OTR STOP REVERSE 1 2 3 4 5 Press SYSTEM MENU. to select it. ON/OFF PAUSE PLAY SLOW FORWARD may be selected.
Installation: Clock Setting (cont’d) 39 Time/Date Manual If the Recorder does not set the time and date correctly using the Time/Date Automatic feature, set the clock manually by following the steps below. TUNER REC/OTR STOP 1 2 3 4 Press SYSTEM MENU. to select it. ON/OFF PLAY may be selected. If it is not, press ; Press 9 repeatedly to select Installation menu. REVERSE , then press : to enter the Press 9repeatedly to select Time/Date, then press :.
One-Touch Recording 1 2 3 4 5 6 Insert a recordable DVD+RW into the Recorder. Details are on pages 18 and 22. In the Index Picture Screen, press 89 to select an empty Title (or empty Index Picture box) on the Disc that has enough remaining recording time for the recording. Details are on page 35. Press TUNER to see TV channels through the DVD Recorder. Make sure you have programmed channels. Details are on page 36.
Timer Recording 41 1 2 Press TIMER on the remote control. Press 89 to select Timer Programming, then press :. Timer TUNER REC/OTR STOP REVERSE K VCR Plus+ programming uB Timer Programming L Timer List ON/OFF PAUSE PLAY SLOW FORWARD B PREVIOUS 11 NEXT EDIT To exit Press TIMER 3 Date will be selected. Press 89 to enter the month and date you want the recording to start, then press :.
VCR Plus+ Timer Recording A PlusCode is a number of up to eight digits, printed in most TV guides next to the start time of a TV program. You can program a timer recording quickly by simply entering the code for your program. Before you begin, complete the VCR Plus+ channel setup. Details are on page 37. 1 2 Press TIMER on the remote control. TUNER ON/OFF REC/OTR STOP REVERSE PAUSE PLAY SLOW FORWARD PREVIOUS 6 NEXT Press 89 to select VCR Plus+ programming, then press :.
Erasing Timer Recordings, Error Messages 43 Erasing Timer Recordings 1 2 3 4 5 Press TIMER. 6 Press TIMER repeatedly to remove the menus. TUNER Press 89 to choose Timer list, then press :. ON/OFF REC/OTR STOP REVERSE PAUSE PLAY SLOW FORWARD Press 89 to highlight the timer recording you want to clear. PREVIOUS Press CLEAR. The recording you selected will appear alone on the screen. Press OK to erase the timer recording.
Title Settings Menu The Title Settings Menu lets you rename a Title that you have recorded onto a DVD+RW. From the same menu, you can also play the entire selected Title or erase the chosen Title from the DVD+RW. 1 When playback is stopped and a DVD+RW is in the DVD Recorder, the Index Picture Screen will appear automatically. Details are on page 35. TUNER ON/OFF REC/OTR STOP REVERSE PAUSE PLAY SLOW FORWARD 2 C10 07:56AM PREVIOUS 0100:01:24 .
Manual Recording Volume, Append Recording 45 Manual Recording Volume You can adjust manually the volume level of your DVD Recorder during recording. 1 During recording of a TV broadcast, press AUTO/MAN REC VOLUME on the front of the DVD Recorder. (You may have to press PANEL first to access the front panel buttons.) The display will show the current audio level. MANUAL appears on the display. 2 3 Press MANUAL 89 on the front of the DVD Recorder to adjust the volume level.
Record Settings, Chapter Markers Record Settings 1 2 3 4 Press SYSTEM MENU. to select it. may be selected. If it is not, press ; TUNER REC/OTR STOP Press 9 repeatedly to select ON/OFF PLAY , then press :. REVERSE Press 89 to select Record mode, Auto chapters, or LP/EP rec mode, then proceed as described in step 4. PAUSE SLOW 1,5 FORWARD PREVIOUS NEXT EDIT ● Record mode Press ; : to choose SP, LP, EP, or HQ, then press OK. “Stored” will appear briefly.
Editing: Disc Information Screen 47 You can change Disc settings for a DVD+RW from the Disc Information Screen. 1 TUNER 1 2 3 When in the Index Picture Screen, press STOP C to select the first Title on the DVD+RW. REC/OTR STOP Press 8 to enter the Disc Information Screen. REVERSE PAUSE PLAY SLOW FORWARD 2 PREVIOUS In the Disc Information Screen, press : to enter the Settings menu.
Editing 1 2 On the Index Picture Screen, press 89 to select the Title you want to edit, then press PLAY : to begin playback. During DVD+RW playback, press EDIT. The Favorite Scene Selection menu will overlay the currently playing video image. The current Title and Chapter numbers will appear at the top of the screen.
Access Control 49 DVD VIDEO CD Access Control limits viewing of Discs that exceed the limits you set. This feature will not limit viewing if the Disc manufacturer did not code the Disc. Philips cannot guarantee the availability of Access Control with all Discs, and therefore denies any liability associated with unintended watching of Discs. Make sure your Discs play according to your Access Control settings before you allow children access to the DVD Recorder.
Access Control (cont’d) Child Lock 1 2 3 Press SYSTEM MENU. to select it. may be selected. If it is not, press ; TUNER REC/OTR STOP Press 9 repeatedly to select will be highlighted. , then press :. Access control Press : again, then press the Number buttons to enter your four-digit code. Details are on page 49.
Access Control (cont’d) 51 Locking or Unlocking Specific Discs Not all DVDs are rated or coded by Parental levels. You may choose to specifically lock or unlock a Disc by choosing Play once or Play always. This way, you can disable viewing regardless of the rating of the DVD. You will need to know your 4-digit code in order to view the Disc. 1 Insert a Disc. The Access Control message will appear on the TV screen. (Child Lock should be Locked. Details are on page 50.
Access Control (cont’d) Parental Level DVDs may contain alternative scenes that conform to the Parental Level, or movie rating, that you select. The Parental Level may apply to the complete Disc or to certain scenes on the Disc. These scenes are rated from 1 to 8. Follow the steps below to set the Parental Level at which you want Discs to play. TUNER REC/OTR STOP 1 2 3 Press SYSTEM MENU. to select it. may be selected.
Access Control (cont'd) 53 Change Country If a Disc has Parental Level coding, the codings are applicable only for the country specified on the Disc. The Disc manufacturer sets these codings. For example, a Disc may be coded at Level 3 for the United States. So, for some Discs, you may need to choose the Country for which the Disc is coded in order for the Disc to play at the Parental Level you select. Details are on page 52. Also refer to your Disc case for more information. 1 2 3 4 Press SYSTEM MENU.
User Preference Settings 1 2 3 4 Press SYSTEM MENU. to select it. may be selected. If it is not, press ; TUNER Press 9 repeatedly to select ON/OFF , then press :. REC/OTR STOP Press 98 to select Status box, Auto resume, Low power standby, or PBC. Then, press : and follow step 4 according to your choice. 1,5 REVERSE PAUSE PLAY SLOW FORWARD PREVIOUS NEXT EDIT ● If you selected Status box, press 98 to choose On or Off, then press OK.
Picture Settings 55 1 2 3 4 Press SYSTEM MENU. to select it. Press 9 to select may be selected. If it is not, press ; TUNER , then press :. REC/OTR STOP 1,5 REVERSE Press 89 to select TV Shape, Black level shift, or Video shift. Then, press : and follow step 4 according to your choice. ON/OFF PAUSE FORWARD NEXT EDIT ● If you selected TV Shape, press 89 to select 4:3 letterbox, 4:3 panscan, or 16:9, then press OK.
Digital Output After connecting the DVD Recorder to your TV and other equipment, you may need to change the DVD Recorder’s Digital Output setting. Look to see which DVD Recorder audio jacks you connected to your other equipment, then set your Digital Output accordingly. The information in step 4 will help you make your choice. You only need to adjust the Digital Output if you used the DIGITAL AUDIO OUT (OPTICAL or COAX) jacks of the Recorder.
Analog Output 57 If you connected the DVD Recorder’s red and white AUDIO OUT jacks to a Stereo (or Stereo TV) as shown on pages 10-13, choose a setting for Analog Output. You do not need to adjust this setting if you used the DIGITAL AUDIO OUT (OPTICAL or COAX) jacks on the DVD Recorder. Check your Stereo and see if it is compatible with Dolby Surround or TruSurround. Then follow the steps below to choose the Analog Output setting that is most compatible with your audio equipment (or TV).
Language Settings, Recording Audio DVD Language Settings TUNER Select a different language for the Disc Menu, Audio soundtrack, or Subtitles if multiple languages are available on the Disc. 1 2 3 Press SYSTEM MENU. to select it. may be selected. If it is not, press ; ON/OFF REC/OTR STOP 1,5 REVERSE PAUSE PLAY SLOW FORWARD PREVIOUS Press 9 repeatedly to select r, then press :. NEXT EDIT 4 Press 89 to select Playback Audio, Subtitle, or Menu, then press :.
Night Mode, Remote Control Settings 59 Night Mode Turn on Night Mode to improve the sound during low volume playback. TUNER 1 2 3 Press SYSTEM MENU. to select it. ON/OFF may be selected. If it is not, press ; REC/OTR STOP Press 9 repeatedly to select G, then press :. 1,5 REVERSE PAUSE PLAY SLOW FORWARD PREVIOUS Press 9 repeatedly to select Night mode, then press :.
Using Your Recorder’s Remote Control with Your TV The following buttons on your DVD Recorder’s remote control will operate the TV at any time: • VOL +/- increases/decreases TV volume • H mutes/activates the TV sound TV switch CLEAR SELECT TIMER CH VOL The following buttons operate the TV if you press and hold the TV switch on the right side of the remote while pressing these buttons: • CH +/- Selects TV channels at the TV (not the Recorder) • A/CH Selects the TV channel you were viewing just before
Using Your Recorder’s Remote Control with Your TV (cont’d) 61 A AOC ......................046,057 Acura.............................036 Admiral ................120,490 Adyson ..........................244 Aiko ...............................119 Akai................................057 Akura.....................245,291 Alaron....................206,243 Alba 064,036,245,063,398 Allorgan ........................321 America Action...........207 Amplivision...................244 Amstrad.198,398,036,064 Anam .....
Helpful Hints If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is on the rear of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative.
Helpful Hints (cont'd) 63 Disc will not play. • Make sure the Disc label is facing up. If you are playing a two-sided Disc, make sure the side you want to play is facing up. Details are on page 18. • Check the Access Control settings for the Disc. Details are on pages 49-53. • Check the Region Code of the DVD. The DVD must be coded for All regions or Region 1 in order to play on this DVD Recorder. Details are on page 7. • See if the Disc is defective by trying another Disc.
Glossary AC-3: Audio Coding 3, also known as Dolby Digital; a multi-channel digital audio compression system from Dolby Labs. Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. Analog sound is available when you use the red and white audio jacks on your equipment. These jacks send audio through two channels, the left and right.
Diagnostic Test 65 If you are still having trouble with the Recorder after checking Helpful Hints and other information in this manual, you may perform a Diagnostic Test on the Recorder. Follow the steps below. Disconnect the power cord from the Recorder. 1 2 Press and hold the PLAY : button on the front of the Recorder while you reconnect the power cord to the Recorder. “BUSY” will appear on the display panel, along with a counter number. Continue to hold down PLAY :.
Specifications DISC FORMATS SUPPORTED Disc type Playback DVD+RW • DVD-RW (Video format) • DVD-R • DVD-Video • SVCD • Video CD • Audio CD • CD-R • CD-RW • Recording • — — — — — — — — DVD+REWRITABLE DISC FORMAT Medium Phase-Change ReWritable Diameter 12 cm Capacity (single side) 4.
Limited Warranty 67 DVD Recorder Two years Free Labor / Two years Parts Exchange This product must be carried in for repair. WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. BEFORE REQUESTING SERVICE... Please check your owner’s manual before requesting service. Adjustments of the controls discussed there may save you a service call.
Information Index a/ch button ..................................21 ac power cord ..............10-14, 24 access control ......................49-53 adapt disc format.......................54 add/delete channels...................36 analog output.......................31, 57 analog sound........................31, 57 angle .......................................26, 30 angle button .........................21, 30 append recording.......................45 arrow buttons.......18, 20, 25, 28 audio button .......
