01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 3 Introduction DVD Video Recorder________________________________________6 Box contents_______________________________________________7 Placement _________________________________________________7 Cleaning discs ______________________________________________7 Remote control ____________________________________________7 Loading the batteries_______________________________________7 Installation Connections - back side of your DVD recorder __________________
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 4 English Language settings_________________________________________24 Feature settings __________________________________________24 Remote Control settings __________________________________25 Record Settings __________________________________________25 Installation ______________________________________________26 Recording Before you start recording___________________________________28 Manual recording __________________________________________29 Check
24-01-2002 18:01 Pagina 5 Access control Child Lock (DVD and VCD) _________________________________42 Activating/deactivating the child lock _________________________42 Authorizing discs when Child Lock is activated _________________42 Securing discs ___________________________________________42 Parental Level (DVD-Video only)______________________________43 Activating/Deactivating Parental Control ______________________43 Country__________________________________________________43 Changing the 4-digit c
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 6 Introduction English DVD Video Recorder DVD (Digital Versatile Disc) is the new storage medium that combines the convenience of the Compact Disc with the latest advanced digital video technology. DVD Video uses state-of-the-art MPEG2 data compression technology to register an entire movie on a single 5-inch disc. DVD’s variable bitrate compression, running at up to 9.8 Mbits/second, captures even the most complex pictures in their original quality.
24-01-2002 18:01 Pagina 7 Box contents Cleaning discs First check and identify the contents of your DVD recorder package, as listed below: - DVD recorder - Remote Control Handset with separately-packed batteries - 2-core power cord - SCART cable - S-video cable - Antenna (aerial) cable - Audio cable - Video cable - DVD+RW disc - User Manual - Warranty card Some problems may occur because the disc inside the recorder is dirty.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 8 Installation English Connections - back side of your DVD recorder - Please refer to your TV set, VCR, Stereo System and any other User Manual(s) as necessary to make the optimal connections. - Do not connect the power until all other connections are made. - Do not connect your DVD recorder to your TV set via your VCR, because the video quality could be distorted by the copy protection system.
24-01-2002 18:01 Pagina 9 Connecting to audio equipment Connecting to A/V receiver or A/V amplifier with digital Multi-channel decoder The best possible sound quality is obtained by connecting your DVD recorder to an A/V receiver with Multi-channel decoder (Dolby Digital, MPEG 2 and DTS). Digital Multi-channel sound Digital Multi-channel connection provides the optimum sound quality.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 10 English Connecting to a receiver with two channel analogue stereo l If you have a receiver with two-channel analogue stereo without any of the above mentioned sound systems, connect the audio Left and Right output sockets to the corresponding sockets on your receiver, amplifier or stereo system. Use the audio cable supplied (6).
24-01-2002 18:01 Pagina 11 Power supply First time set-up: virgin mode After switching on the DVD recorder for the very first time the ‘virgin mode screen’ will appear. In ‘virgin mode’ you may have to set your preferences for some of the recorder features. l Make sure that all necessary connections are made before connecting the DVD recorder to the power supply. l Plug the power cable supplied into the Power connector on the rear of the recorder. l Plug the mains plug into an AC outlet.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 12 English Manual setting When a menu is displayed: l Use the wv (down up cursor) keys to go through the options in the menu. The icon of the selected option will be highlighted. l Use OK to confirm your selection and to select the next menu. Subtitle language The subtitles of DVD Video discs will be in the language you choose provided this is available on the disc in play. If not, subtitles will revert to the first subtitle language on the disc.
24-01-2002 18:01 Pagina 13 English 01DVD+R1000UMAZGB24411F1 Autom.search Searching for TV channels XX c h a n n e l s f o u n d Please wait ‰ When Auto search is completed ‘Autom. search complete - XX channels found’ appears on the TV screen. After Auto channel search you can have TV channels stored automatically in the same order as your TV set. See ‘User preferences installation’ - ‘Follow TV’. Time/Date When Channel auto search is completed the actual Time and Date are also set automatically.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 14 Functional overview English Front of recorder B STANDBY/ON - switches the recorder to Power/Standby mode Standby indicator - lights up red when the recorder is in standby mode - lights up green when the recorder is operative Infrared remote control PANEL - to open and close the panel that covers additional keys and connectors Display - displays the current status of the recorder 0 RECORD - direct recording of the selected programme on TV set or the re
24-01-2002 18:01 Pagina 15 English 01DVD+R1000UMAZGB24411F1 Rear of recorder MAINS - connection to the mains TV - RF connection to TV set ANTENNA - RF connection to antenna/cable TV signal VIDEO (CVBS) - OUT: for connection to a TV set, receiver or amplifier with CVBS video inputs - IN: for connecting a video source with CVBS outputs S-video (Y/C) - OUT: for connection to a TV set, receiver or amplifier with S-video (Y/C) inputs - IN: for connecting a video source with S-video (Y/C) outputs AUX I/O (EX
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 16 English Display DVD DECODER - DVD Video disc inserted DVD+R - DVD+Recordable disc inserted DVD+RW - DVD+Rewritable disc inserted - Decoder activated for current preset VPS/PDC - Video Programming System/Programme Delivery Control active on current preset CHANNEL TITLE - Preset name or number - DVD title number RECORD TRACK - Recording in progress - VCD/CD track number TIMER VCD - Timer programmed or active - Video CD inserted CD TRACK T
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 17 TV/DVD switch - DVD mode/TV mode selector for TV set* 9 - stop 0 - direct recording of the currently selected programme 2 - play Q - search backward ; - pause H - slow motion R - search forward J - previous chapter, track or title EDIT - displays edit menu for DVD+RW or DVD+R disc K - next chapter, track or title E +/– - TV volume up/down c - TV Mute ON/OFF P +/– - programme up/down a ZOOM - enlarge video image } ANGLE - select DVD camera angle Z
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 18 Operation English Important notes for operation Disc types You can switch on the DVD recorder with the B STANDBY/ON key. Keep your DVD recorder connected to the mains at all times to ensure that programmed recordings can be made and that the television functions normally. You will recognize the different types of discs, that can be used in your DVD recorder by the logo.
24-01-2002 18:01 Pagina 19 DVD-RW Only plays if it is recorded in video mode and has been finalized. R On-screen display information System menu bar W CD Digital Audio You can play digital audio CDs in conventional style through a stereo system, using the keys on the remote control and/or front panel, or via the TV set using the on-screen display (OSD).
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 20 English Scan Repeat All l You can navigate between the various items of the user preferences menu with the v (up cursor) and the w (down cursor) key. To select an item press u (right cursor) key. Repeat Title Repeat Track -- --- off on off -- --- off on off Repeat Chapter Repeat A to end Repeat A-B Angle Child Lock On Child Safe Resume Action prohibited User preference menu operation l Press SYSTEM MENU on the remote control.
24-01-2002 18:01 Pagina 21 Timer info box Video-CD The timer info box is located above the tuner info box and is displayed in tuner mode. It displays the current status of the timer. no disc disc error When a timer is programmed it shows a timer indication and the start time or date of the first programmed recording.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 22 English Index Picture Screen l On the right hand side of the Index Picture Screen, you can see the disc bar. This gives an overview of all titles on the disc, as well as any empty spaces. On the disc bar, an arrow – the disc pointer – indicates your current position on the disc. From this point you may resume playback or recording.
24-01-2002 18:01 Pagina 23 User preferences Setting user preferences You can set your user preferences for some of the recorder features. (See ‘Operation’ - ‘User preferences menu operation’.) The following items can be adapted: Video shift Factory setting is such that the video will be centered on your screen. Use this setting to adjust the position of the picture on your TV set by scrolling it to the left or right.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 24 English Surround: Select this setting when using equipment with a Dolby Surround Pro Logic decoder. In this setting the 5.1 audio channels (Dolby Digital, MPEG-2) are downmixed to a Surround-compatible 2-channel output. 3D Sound: In a set-up without rear speakers (analogue stereo output), this option remixes the six channels of digital surround (Dolby Digital, MPEG-2) into a two speaker output, while retaining all of the original audio information.
24-01-2002 18:01 Pagina 25 Record Settings -- off --- on off Features Access control Enter code... Status box On Autoresume Off Low power standby Off PBC Off PBC This feature is only available when a (Super) Video CD is loaded. It allows you to disable or enable the PBC (Playback Control) menu of VCD discs. See under ‘Special VCD features’: Factory settings is ‘On’. Finalise disc This option is only available on unfinalised DVD+R discs.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 26 English Direct Record With the Direct Record function switched On and the DVD recorder switched to standby, the channel number selected on your television will be automatically taken over by the DVD recorder, at the moment it starts recording. This only applies for televisions connected via SCART, which have video output via SCART or which have EasyLink. Factory setting is On. l In the record settings menu, select ‘Direct record’. l Select On.
24-01-2002 18:01 Pagina 27 Manual TV channel search You can perform a search to select and store TV channels manually. If the DVD recorder is connected via EasyLink, this function is not available. l Press SYSTEM MENU. l Select Installation. l Select Manual search. l In the line Channel/freq. select the display for: Freq. : frequency CH : channel S-CH : special channel l If you know the frequency or channel of the desired TV channel, you can enter the data in line Entry/search with the digit keys 0-9.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 28 Recording English Before you start recording Recordings on a DVD disc are called ‘titles’. Every title consists of one or more chapters. stop 11:15 Disc is not a DVD video disc Press OK to open tray or press REC to erase disc For more information about how to go to other titles or chapters see ‘Playback - general features’. Important: Recordings on a DVD+RW disc are normally started from the position of the so-called disc pointer, i.e.
24-01-2002 18:01 Pagina 29 Manual recording Checking input Normally, the DVD recorder displays the contents of the disc on screen. l Press TUNER in order to switch to the internal tuner, or whichever other source is selected, if you want to check the input before starting a recording. ‰ On the TV screen, you will see the actual picture quality that you will get if you record: the video has been encoded and decoded again. This is why you will see a delay of about 1.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 30 English l The recorder automatically jumps to the end of the last title on the disc and starts recording. ‰ If no free space is left. The display will show ‘DISC FULL’. Safe record is not possible then. Recording with automatic switch-off (OTR One-Touch Recording) Recordings on DVD+R are always automatically made after the last title on the disc. Direct Record l Make sure ‘Direct Record’ is switched On. (See record settings).
24-01-2002 18:01 Pagina 31 When all timer blocks are full, the options timer programming and G-CODE programming cannot be accessed. For clearing a timer block, see ‘How to clear a timer block’. What is ’VPS’/‘PDC’? With ’VPS/PDC’, the TV station controls the beginning and the length of the programmed recording. This means that the video recorder switches itself on and off at the right time even if a TV programme you have programmed begins earlier or finishes later than expected.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 32 English Timer G-Code programming Date Prog. Start 09 NED 1 VPS PDC 09:35 LP/SP Press SELECT End Rec Mode 11:35 SP To store Press OK l Confirm with OK. ‰ The data has been stored in a timer block. l To end, press TIMER. l Make sure that you inserted a recordable disc. If you inserted a write-protected disc recording will be refused. l Switch off with B STANDBY/ON.
24-01-2002 18:01 Pagina 33 Programming with ’NEXTVIEW Link’ How to check or alter a timer block This DVD recorder is equipped with the function ’NEXTVIEW Link’. If your television is also equipped with this function, you can mark TV programmes on the television for programming. These TV programmes will automatically be transmitted to a timer block on the DVD recorder. If you clear the marking of the TV programme on the television, the corresponding timer block on the DVD recorder will also be cleared.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 34 English How to clear a timer block l l l l Press TIMER on the remote control. Select Timer list with w or v (down up cursor). Press u (right cursor). Select the timer block you want to clear with w or v (down up cursor). l Press CLEAR. l Confirm with OK. l Switch off by pressing TIMER.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 35 Playing a DVD+RW or DVD+R disc l Insert a DVD+RW or DVD+R disc. ‰ If the inserted disc is write-protected, playback starts automatically otherwise the Index Picture Screen appears. l Press ) PLAY. ‰ Playback starts automatically from the point where it was stopped the last time the disc was played or recorded. If you want to start playback from the beginning of the disc, you can do so via the Index Picture Screen (see ‘Index Picture Screen’).
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 36 English General features Moving to another chapter/index Note : Unless stated otherwise, all operations described are based on remote control operation. A number of operations can also be carried out via the system menu bar on the screen.
24-01-2002 18:01 Pagina 37 Still Picture and Step Frame l Select (picture by picture) in the system menu bar. l Use the w (down cursor) key to enter the picture by picture menu. ‰ The recorder will now go into pause mode. English 01DVD+R1000UMAZGB24411F1 Repeat DVD Discs - Repeat chapter/title/disc l To repeat the currently playing chapter, press REPEAT. ‰ appears on screen. l To repeat the currently playing title, press REPEAT a second time. ‰ appears on screen.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 38 English Scan Plays the first 10 seconds of each chapter/index on the disc. l Press SCAN. l To continue play at your chosen chapter/index, press SCAN again or press 2 PLAY. Time search The Time Search function allows you to start playing at any chosen time stamp. l Select (Time Search) in the system menu bar. l Press w (down cursor). ‰ The recorder will now go into pause mode.
24-01-2002 18:01 Pagina 39 Special DVD+R(W) features Recording date and time If a recording was made from a digital camcorder using the i.LINK DV input, the original recording date and time are automatically stored as DVD subtitles. l Press Z SUBTITLE to display the recording date and time. ‰ The recording date and time are displayed in the right bottom corner of the screen. l Press T/C followed by DISC MENU. ‰ The disc menu is displayed. l To remove the disc menu, press DISC MENU again.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 40 English Subtitles Special VCD features Playback Control (PBC) l Select Z (Subtitle) in the system menu bar. l Press Z SUBTITLE or w v (down up cursor) repeatedly to step through the different subtitles or to switch subtitles off. l You can enter the required subtitle number directly using the numerical keys 0-9. l Make sure PBC is switched On. See ‘User Preferences-features settings’. l Load a (Super) Video CD with PBC and press 2 PLAY.
24-01-2002 18:01 Pagina 41 English 01DVD+R1000UMAZGB24411F1 Pause Repeat track/disc l Press ; PAUSE during play. l To return to play, press 2 PLAY. l To repeat the currently playing track, press REPEAT. ‰ repeat track appears on screen. l To repeat the entire disc, press REPEAT a second time. ‰ repeat disc appears on screen. l To exit repeat mode, press REPEAT a third time. Search Repeat A-B l To search forwards or backwards through the disc at 4x normal speed, press 5 REVERSE or 6 FORWARD.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 42 Access control English Child Lock (DVD and VCD) off When activating Child lock, only discs that are authorised can be played without PIN code. The recorder memory maintains a list of 50 authorized (‘Child safe’) disc titles. A disc will be placed in the list when ‘Play Always’ is selected in the ‘Child protect’ dialog. Each time a ‘Child safe’ disc is played it will be placed on top of the list.
24-01-2002 18:01 Pagina 43 Note: Double sided DVD discs may have a different ID for each side. In order to make the disc ‘Child safe’, each side has to be authorized. Multi volume VCD disc may have a different ID for each volume. In order to make the complete set ‘Child safe’, each volume has to be authorized. Securing discs l Insert the disc. ‰ Playback starts automatically. l Press 9 STOP while { is visible. ‰ | will appear and the disc is now banned i.e. it is not Child safe any longer.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 44 English Changing the 4-digit code l Select Access control in the features menu using w v (down up cursor) and press u (right cursor). l Enter the old code. l Move to Change code using w (down cursor). off on off Child lock Access control Parental level Status box Change country Autoresume Change code Low power standby PBC l Press u (right cursor). l Enter the new 4-digit PIN code. l Enter the code a second time and reconfirm with OK.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 45 Title settings Erasing a title For each title on a DVD+RW or DVD+R disc the default settings can be changed to your personal preference in the title settings menu. You may simply erase a title on DVD+RW by recording over it, but if you want to erase the whole title instantly, do the following: l In the Index Picture Screen, select the required title with w v (down up cursor). l Press u (right cursor) to enter the title settings menu.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 46 English Disc Info Screen Disc Settings l When on the Index Picture Screen, press 9 STOP. ‰ You are now on Title 1. l Press v (up cursor). ‰ You enter the Disc Info Screen. l Press w (down cursor) to exit the Disc Info Screen. For each DVD+RW or DVD+R disc the settings can be changed to your personal preference in the disc settings menu. l In the Disc Info Screen press u (right cursor). ‰ You will now enter the ‘disc settings’ menu.
24-01-2002 18:01 Pagina 47 Erasing a disc This option is only aivailable for DVD+RW discs that are not erase-protected. l In the Disc Info Screen press u (right cursor). ‰ You will now enter the ‘disc settings’ menu. l Select ‘Erase disc’ and press OK. ‰ The message ‘This will erase all titles’ is displayed. l Press OK to confirm or t (left cursor) to cancel. ‰ ‘Erasing disc’ is shown until the action is completed.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 48 English Favorite Scene Selection The basic function of any edit operations is to improve accessibility and handling of your recordings. For instance: scenes you do not want to see during playback (e.g. commercials during a movie) can be marked as chapters and made hidden. During playback you will see your recording without the hidden chapters as one sequence. Note: In between the scenes the picture may freeze for a short moment.
24-01-2002 18:01 Pagina 49 English 01DVD+R1000UMAZGB24411F1 Deleting chapter markers You van combine a chapter with the previous chapter in the current title by deleting the chapter at the beginning of the current chapter. l In play mode press EDIT on the remote control to call up the FSS menu. l Select ‘Delete chapter marker‘. l Press OK on the remote control to confirm ‰ ‘Deleting marker’ will appear. You can delete all chapter markers (manually and automatically generated) in the current title.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 50 Troubleshooting English If it appears that the DVD recorder is faulty, first consult this checklist. It may be that something has been overlooked. Under no circumstances attempt to repair the system yourself; this will invalidate the warranty. Look for the specific symptom(s). Then perform only the actions listed to remedy the specific symptom(s).
24-01-2002 18:01 Pagina 51 The recorder does not record a timer programme • Make sure that the recorder is switched to standby before the timer starts. No new title can be recorded • Check if the maximum number of titles has been reached (message: ‘too many titles’ on screen). If so, delete a title next to a free space. • Check if the disc is write protected. If so, unlock the disc in the disc settings menu (message: ‘Disc locked’ on screen). • Check if the (DVD+R) disc has been finalized.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 52 English Diagnosis programme If the recorder is still faulty you can start the Diagnosis Programme in the recorder. You can operate the Diagnosis Programme by following the instructions step by step. Instructions l Unplug the power cord of the recorder. l Press the 2 PLAY key and keep them pressed while you plug the recorder. ‰ On the display the message BUSY appears together with a counter.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 53 English Glossary This section explains most important terms, abbreviations, and acronyms used in this document. Term Explanation AC-3 Audio Coding 3, also known as Dolby Digital. Multi-channel digital audio compression system from Dolby Labs. A/V Audio/Video Chapter A part of a title. Disc Bar A graphical representation of the contents of a (DVD+RW) disc.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 54 English PAL See TV system. PBC Playback Control. A special feature on a VCD 2.0 or Super VCD disc that enables interactive use. PCM Pulse Code Modulation. A digital audio encoding system. PDC Program Delivery Control RGB Red-Green-Blue. A top-quality video connection where red, green and blue components of a video signal are carried through separate wires. SCART cable Also known as Euro-AV cable.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:02 Pagina 55 Using your DVD recorder remote control with your TV set Your DVD recorder remote control can transmit several commands to TV sets of different brands. The following keys will always operate the TV set: - E + increase TV volume - E - decrease TV volume - c mute TV If your TV set does not respond to the remote control, you can re-programme your remote control. Below you will find a list of all available remote control codes for various TV brands.
01DVD+R1000UMAZGB24411F1 24-01-2002 English Firstline . . . . 348, 036, 243, 244, . . . . . . . . . . . . . . . . . . . . . . 321 Fisher . . . . . . . . . 244, 181, 397 Flint. . . . . . . . . . . . . . . . . . . 482 Formenti . . . . . . . . . . . 347, 064 Frontech . . . . . . . . . . . 458, 291 Fujitsu . . . . . . . . . 206, 099, 233 Funai . . 321, 198, 206, 207, 291 Futuretech . . . . . . . . . . . . . 207 GE. . . . 048, 074, 078, 205, 478, . . . . . . . . . . . . . . . . . . 120, 309 GEC . . . . . . .
01DVD+R1000UMAZGB24411F1 24-01-2002 18:02 Pagina 57 English Notes NOTES 57
01DVD+R1000UMAZGB24411F1 24-01-2002 18:02 Pagina 58 Philips Customer Care Centers 58 Austria tel: 43-0-810 001 203 Luxembourg tel: 352-404061215 Belgium tel: 32-2-070 222 303 Netherlands tel: 0900-8406 Denmark tel: 808 82 814 Norway tel: 22-748 250 Finland tel: 358-09-6158 0250 Portugal tel: 352-1-4163063 France tel: 33-1-825 889 789 Spain tel: 34-902-113 384 Germany tel: 49-0-180-535 6767 Sweden tel: 08 5985 2250 Greece tel: 30-0-0800-3122 1280 Switzerland tel: 0844 800 544 Ireland tel:
