Specifications

Is the same hack as Mustek DVD V300 because the players are the same.
Bluesky DS-8315
Open the drawer of the reader via the remote control. Press successively keys 8,
4, 2, and 1. Choose the zone desired in the menu. If you wished to
decontaminate Macrovision, press successively keys 4, 5, 6, and 1
Bush 1000
Open the player's tray, put in a Region One disc but do not close tray, Press the
0,1,2 and 3 buttons on the remote control followed by the play button.
Bush 2000
Open the tray. Insert region 1 disc. Do not close the tray. Press 0,1,2,3 on the
remote and Press Play.
Bush 2002
On the player front press open, on the remote press 7, 7, enter. You are now in
the set-up page. Change region to 13 (region free) and while you are there turn
Macrovision off.
Bush 2004
Already multi region.
Bush 2004A
Open tray type in 33088 then press 0 for region all regions then close tray to
complete.
CCE DVD2100
Code1
Press the following button sequence on your Remote Control: Open/Close, Zoom,
A-B, Up, Left, Down, Right. The words "Region Free" should briefly appear on the
TV screen.
Code 2
Open tray, Press 9 four times. The screen will show **** after you press 1111
and the Zone number you pressed after that.
Classic DVD102
Turn on the DVD player with no disc in. Press the Set-up button, then Volume +,
Volume -, Volume +, Volume - After you do that, it will close the set-up menu,
and in the Top Right of the Screen, it will say VER * Use the left and right buttons
on the remote (by the select / play key) to select a region. VER 1 = Region 1,