Specifications

Vtrek DVD-9901B
Open the DVD-Drive, On the remote enter the Code "2168+Regioncode(1-6)"
and Close the DVD-Drive.
Wharfedale 750
Open draw, place disc on draw, on remote 0, 1, 2, and 3, close draw or play.
Player is now region free.
Wharfedale M5
Press SETUP, 6, 2, 8, 3, 6 on the remote control. You should now be in the
Factory Menu, where you can select either ALL for region-free, or a specific region
Wintel WIN9663
With the disc tray open. Press Setup, Step, Prev, Next. You should get a new
menu titled, FACTORY SETUP.
XMS 250, XMS 750, XMS 950
Press "open tray" then Press "33080" for multizone or "33081" for region 1 or
"33083" for region 3 etc. press "close tray"
Xwave LB 900, Xwave LB 1000
Power on the DVD without any CD inside. Press on your remote: set-up, step,
ffwd, fbwd Now press: pause, stop, key + or key -, With the key + or key- you
can change it to Region 0. Now leave the Region to 0 for a code free DVD.
Yamaha DVD S510, Yamaha DVD S520
You'll need a One-for-All 6 remote with the code 0539. Power on the unit and
then key in 085. The player’s display should then show a series of dashes. Press
222 222 005 255 and then 'play'
Yamakawa 218, Yamakawa 713, Yamakawa 715, Yamakawa
780, Yamakawa 820, Yamakawa 860
Turn on player and wait for "no disk". Use remote and push the following buttons,
set up, mute, stop, zoom.
Yelo 800 DVD
Press "EJECT, SETUP, MUTE, LAST, NEXT" buttons one after another and you will
be given a Factory Control Page where you should select the Region ID option.
Here you should find it set to REGION BYPASS. (Which you would normally leave
it on).