Specifications

Code 1;
Power on the player. Press, "pause" on remote. Enter code "314159". Player
display reads "COdE - -" Enter 0 and Press "pause" again, Power off player. Wait
10 seconds and then power on again.
Code 2;
Press display without a DVD in the machine, select display and set
video standard to (pal) not content specific.
Alba DVD108
Press the 'pal/ntsc', press menu and press 0
Amoisonic DVD8506
Code 1;
Power on the player, make sure the tray is open, and on the remote press:
"0108x" Without the quotes. Where x = region. 01080 is region free.
Code 2;
Same as above, but use 0106x as the code.
Apex AD-1000
Visit http://www.apexmodchip.com and see the chipping section of this guide
Apex 500W
Visit http://www.apexmodchip.com and see the chipping section of this guide
Apex AD-1100W
First check with version you player,
1100w-1MB
ES4318F (ESS) Main Processor
AV3168 Video Processor
1MB Stock Firmware chip NOT SOCKETED (Atmel AT49F8192AT-90RC 44 Pin SOJ)
"TV TYPE" can be set via GENERAL PAGE
"If the serial number label is white and the number ends in "05", it is probably a 1mb unit.
If the label is yellow and the number is less than D11000202199????xE05, you probably
have a 1mb unit.
1100w-512KB
ES6008F (ESS) Main Processor
No Video Processor
512KB Stock Firmware chip NOT SOCKETED (AMIC A29040L-70 32 Pin PLCC)
"TV TYPE" can be set via PREFERENCES MENU
If the label is white and the number ends in "04", it is probably a 512kb unit.
If the label is yellow and the number is larger than D11000202214????xE05, you probably
have a 512kb unit.
Apex 1100w-1MB Player