Specifications

When the player shows the map screen and say "cannot play on modified region
1 players". When this screen appears, you must press the "menu" button several
times, and the movie starts.
Sharp DV-740
Write: TSDVDREG-2001-8939912-R0 (but write R1 R2 etc. for whatever region)
to a notepad file, save as CREGIN.TXT and Burn to CD-R as ISO9660 Mode 1,
insert this disc into your sharp DV-740, it will make a noise as though it is
scanning a disc then in the bottom left hand corner will appear the region to
which the player is set, to change back from region to region you will have to first
turn the DVD player off then insert the disc.
Shinco DVD 360
Press Eject, Remove CD, Close then Press Pause, 1, 2, 3
Or
Load the disc. A map will show on the screen. Press the stop button twice.
Wait until the "press play to continue" sign disappeared. Press the play mode
once. Wait for 5 seconds and a "program" sign will appear. Then press play mod
twice. A "continue" sign will appear. Finally press the Play key once and it will
works.
Shinco DVD 380
With DVD in drive make sure DVD is not playing. Hit [stop] then [set-up] then
[pause] then [1] then [2] then [3]. A new menu will popup then you can
manually select everything.
Shinco DVD 8320, Shinco DVD 960, Shinco DVD 868
Press Stop on the remote. Press Setup. Press Still/Step. Enter 123 on the remote.
A service menu will now appear enabling you to change the region using the
country code 13.
Shinsonic DVD-3838
http://www.nerd-out.com/darrenk/
Singer SGD-001
Ensure the player’s tray is open. From the Remote Control, Press 7, Press 4,
Press Select or Enter, Proceed as per usual. Change the "COUNTRY CODE"
(Region code) to 13, this will set you to Region free
Singer SGD-006P
Open Drawer. Press 8, 4, 2, 1 to bring up hidden region menu. Press the select
button until region 9 is selected. Close Drawer