Specifications

Remove the disc and close the disc tray. Press STOP STOP SETUP 3 8 8 8 3 and

choose the region.

Philco DV-P2100

Open tray, Press 8926 ("*" will be seen on the screen). Then select area (1 to 6)

or "0" for all. Press PLAY (tray will close).

Philco DV-P2500

Open the player's tray, Press 8 8 8 8 (four "*" will be shown on the screen).

Select the region (1 to 6) or "0" for region free. Press play to end the operation

and the tray will close.

Philco PH-5000, Philco PH-5100

Turn on player, Press Eject on remote control. Press 77 + enter (Some Remotes

use the "Select" key) region code: 13 + enter. Press Play and Put a DVD in the

tray then Press play.

Philco PH-7000

Press "set-up", "Pause/Still", Press "Prev", Press "Next". Then Select -->REGION

then -->BYPASS.

Philco PH-9000

Same as the 5000 series

Philco 9100 and 7100

Turn on player, Press Eject on remote control. Press 74 + enter then region

CODE: 13 + enter. Press Play and Put a DVD in the tray. Press play

Philco

PH-9200

Turn on player, Press Eject on remote control then Press 8421 or 1248 with

region CODE: 9 for multiregion. Press select and Put a DVD in the tray, Press

play.

All Philips DVD Models

See http://home.hccnet.nl/r.de.haas/RC6/index.html

http://www.home.zonnet.nl/jeroenverhaar/en/index.htm

Philips DVD 704

Power on the unit with no disc. Press, "PAUSE" on the remote. Enter "3 1 4 1 5 9"

on the remote ("CODE 1" will be shown. "1" is the current region code). Press "0"