Specifications

down
right
Lenco DVD-02
Put on the DVD open the tray. Type in the code 330880 after every number you
have to wait until the hand disappears. Now your player is region and
macrovision free.
Or
Lenco 202 enter set-up and press 167 on remote. This brings up the region
menu, enter the digit from 1 to 6 of the region required.
Lenoxx DVD2003
DVD on with No disc, Press SETUP NEXT PREV NEXT PREV with remote. You'll see
"VER 1" on the upper left corner. With LEFT and RIGHT you can change the value.
Change it to 255 (Region Free).
Lenoxx DVD9000
Open the DVD tray, press the code 9653 on the remote. If you see 00 in the top
right corner of the monitor, it means it is region free. If you now select
01,02,03,04,05 or 06 it will select a region manually.
LG 2300
With "no disk" on tray, press sequentially in the remote control PAUSE,3,1,4,5,9:
code -- will appear in the display. Enter the region or 0 for region free.
LG 3000
Press the Pause button on your remote control. Using your remote control enter
the code 3, 1, 4, 1, 5 and 9, Press the 0 button on your remote control for Region
free, 1 for Region 1 or 2 for Region 2. Press the Pause button on your remote
control. Power off your player and wait a few seconds. Power on your player
Or
Press the Setup button on your remote control then, Step, Next, Up and Down,
select the region of your choice or Bypass for region free, save and then Exit the
menu.
LG 3200E, LG 3520, LG 4351, LG 4721P, LG 4730, LG 4821P,
LG 4950S, LG 5083, LG 5822N, LG 593W
Same as above
Lifetec LT 7989