Specifications

When the display reads 000 5858 use the up and down buttons to change the
000 to 02E. Using the Left and Right arrow buttons, change the last four digits
until they read 0000 for Region Free, 0101 for Region 1, 0202 for Region 2 or
0404 for Region 4. Press Enter on the player. Press Standby and wait 5 seconds.
Press Standby again. Your player is now set to the region you requested. If you
find some titles do not play on the region 0 setting, you may have to hard select
the appropriate region.
JVC XV-515
Locate wire jumper B532 on the printed circuit, near the front panel. It can be
found underneath the connector linking this board to the above one. Cut the
jumper and turn the power on. Enter password 5963. Turn off the machine and
on again.
JVC XV-522
Make sure there is no disk in the tray. Unplug mains AC. on the unit press and
hold "play" and "open/close". While holding these keys plug in mains power.
Release these keys and test appears on the display. Press "3D-phonic". Press
menu twice on the remote. Display reads 000 5858 use down buttons to 000 to
02e
9 change last 4 digits to the following
0000 for region free
0101 for region 1
0202 for region 2
press enter on the remote. Press standby and wait 5 seconds. Press standby
again and the player is now set to the region that u desire
If this doesn't work try again with pushing the 3d-phonic button
JVC XV-D2000
Press Power to turn machine off. Wait 5 seconds. Press and hold DVD Menu and
On Screen on the machine together, and then press Power on
the machine to switch it back on. Let go of the DVD Menu and On Screen buttons.
Press Standby on the machine, the display should now show either "TEST 2",
"TEST4", or "TEST 6" depending on the machines existing region setting. Press
DVD Menu on the machine twice in a row, and the display should now show "000
5858". Press the Up and Down cursor buttons, and change the first three digits
to "02E". Press the Right and Left cursor buttons, and change the last four digits
to "0000" for Region Free, "0101" for Region 1, "0202" for Region 2, "0404" for
Region 4, "0808" for Region 8, and finally "2020" for Region 20 ***See Note at
bottom. If you are having problems with Region 4 disks change the above setting
to "0458" and make sure PAL or NTSC is correctly set on your machine. Press
Enter to confirm the Region change. Press Standby on the machine to turn it off.
Wait 5 seconds. Press Standby on the machine to turn it on.
Kendo 530102
Power on the player and press "OPEN" and then push 33088 on the remote, after
that press a number for the region code, 0 for all.