Specifications

remote.
3. Press Play on the remote.
Your player is now a region 2 only player.
To reset the machine to factory defaults, do the following:
1. Press Play on the remote, followed by 1, 5 and 9.
2. When the display reads '___ ____' enter 004 001 000 140 using the
remote.
3. Press Play on the remote.
Grundig Xenaro GDP 5100
This one was written for people who might not quite
understand what to do {I was confused by the 5532 stuff
and thought it was another code)
1. Select "i" on the remote
2. Choose "installation" [box 5]
3. Choose "extended settings" [box 5]
4. Choose "service menu" [box 3]
5. Choose "dealer service menu" [box 2]
6. A code is needed here, it's 8500.
7. choose "system messages"
8. Choose "on" and press the < button
[to the left of the "ok" button on
your remote]
9. Go back to the "service menu"
10. Choose "system information"
11. With the remote, press 70307196
[note that the number will not show
on the screen while you do this]
12. If you typed it correctly, a box with
"system messages" appears and a word
or a number will appear next to it.
13. If the word reads "none" then forget
the whole thing, as you are already
region free... if there's a number
there then that is the region your
unit is using.
14. Press "ok" on the remote to change
the region.
15. Use the down button [directly under
the "ok" button on the remote] to