Specifications

Daewoo DVG-5000N
See http://www.nerd-out.com/darrenk/ for instructions
Daewoo DVG-6000D
Code 1
Put a region 1, 2, 3, or 4 and so on into the player when it comes up with "wrong
region" just push the "title PBC" button on the remote and away you go.
Codes 2
Same code as DVG3000N works
Daewoo DVG-9000N
See http://www.nerd-out.com/darrenk/ for instructions
Daewoo S2122
Power up the unit, press OPEN, Press SETUP, insert 33088 followed by the zone
number (0 = all zones). In the main menu screen, a line will disappear and a little
box with "R=number" will confirm the region change.
Dansai DVD1010
Turn it on, press set-up button, then stop, then ff, then skip, then previous. This
opens secret menu, now change region to bottom option.
Dansai DVD852
To access the factory set-up page enter the following hack: Press SETUP On
Remote, Press STOP, PREVIOUS, NEXT On Front Panel Of DVD Player.
Factory Set-up will appear allowing region code and macrovision removal.
DO NOT SELECT "CSS" OFF or the player will not recognise any disks at all.
Dansai DVD852S
Turn on the DVD player, with no cd in the player. Press 'set-up' on the remote.
Press 'stop' on the DVD player. Pres 'Prev' on the player (top button). Press 'next'
on the player (bottom button). In this menu you can set 'region' and turn on or
off the marcovision
Dantax DVD1000
Open slide. On remote control, push 9926. On remote control, push 0
Close slide. Turn power off, and turn power on again after approx. 1 minute
The DVD player will now recognize all regions.