Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. • Once your Philips purchase is registered, you’re eligible to receive all the privileges of owning a Philips product. • So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Index english LASER SAFETY This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. ..................p. 7 français español ................p.38 ................p.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.
IMPORTANT SAFETY INSTRUCTIONS – Read before operating equipment This product was designed and manufactured to meet strict quality and safety standards.There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read these instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference. 3.
LIMITED WARRANTY DVD VIDEO PLAYER 90 Days Free Labor One Year Exchange Warranty on Parts This product must be carried in for repair. WHO IS COVERED? MAKE SURE YOU KEEP... You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Please keep your sales receipt or other document showing proof of purchase. Attach it to this owner’s manual and keep both nearby.
Contents Introduction Functional overview Front panel -------------------------------------------------------------------------------------------------------------------Rear panel ---------------------------------------------------------------------------------------------------------------------Display ---------------------------------------------------------------------------------------------------------------------------Remote control --------------------------------------------------------------------
Introduction Entertainment for the new millennium Video was never like this before! Digital video discs provide perfect digital, studio-quality pictures; with three dimensional digital, multichannel audio, story sequences screened from your choice of camera angle; sound tracks in as many as eight languages; and up to 32 subtitles if available on disc.Whether you watch DVD-Video on wide-screen or regular TV, you always see it the way it was meant to be.
Video CD You will recognize Video CDs by the logo shown at left. Depending on the material on the disc (a movie, video clips, a drama series, etc.) the disc may have one or more tracks.Tracks may have one or more indexes, as indicated on the disc case.To make playback easy and convenient, your player lets you select tracks and indexes. VIDEO CD TRACK 1 INDEX 1 TRACK 2 INDEX 2 INDEX 1 INDEX 2 INDEX 3 Audio CD Audio CDs contain music tracks only.
Functional overview Front panel STANDBY-ON - switches the player to Standby mode or to ON Standby indicator - lights up red when the player is in Standby mode only Display - shows the current status of the player T - NEXT title/chapter/track 2 PLAY - starts video/audio play S - PREVious title/chapter/track SOUND - selects Stereo, Dolby Surround, 3D Sound or Multichannel Sound STANDBY-ON SOUND DVD 865 DVD/VIDEO CD/CD PLAYER VCD TITLE CHAPTER TRACK SCAN A -B REPEAT SHUFFLE PLAY TOTAL TRACK TIME CHA
Rear panel MAINS power jack - connect to the power source Digital audio out jack (optical) - connect to digital (optical) equipment Digital audio out jack (coaxial) - connect to digital (coaxial) equipment Audio / L/R (Left/Right) - connect to an amplifier, receiver or stereo system Video Out (CVBS) - connect to a TV with CVBS video inputs Video Out (S-Video) - connect to a TV with S- Video (Y/C) inputs Video Out (CR CB Y) - connect to a TV receiver with CR CB Y inputs SURROUND CENTRE FRONT DIGITAL AU
Display Front (left and right) speakers active Center speaker active Test tone active Active audio format Surround (left and right) speakers active Subwoofer active DVD disc inserted VCD (V)CD disc inserted Indicates current player function: Play, Pause, Search, etc.
Remote control TV MUTE - DVD-mode: selects Stereo, Dolby Surround, 3D Sound reproduction - TV-mode: mute ON/OFF DVD/TV switch - DVD mode/TV mode selector** STANDBY-ON REPEAT - repeat chapter, track, title, disc REPEAT A-B - repeat sequence SHUFFLE - playback tracks in random order SCAN 0-9 numerical key pad RETURN - go back to previous menu OK - acknowledge menu selection Q O * - search backward / previous chapter or track 2 - play R P * - search forward / next chapter or track - playback of the firs
On-screen display information Menu bar/Status window V W X Y Z } a c d e User preference Title/Track Chapter/Index Audio language Subtitle language Angle Zoom Video Program Sound Picture by Picture f g h Slow motion Fast motion Time search Status window icons The status window displays the current status of the player and appears with the first part of the menu bar. (You must activate this in the Features Menu, see Personal Preferences for details).
Temporary Feedback Field icons Scan Repeat All Repeat Title Repeat Track Repeat Chapter Shuffle Shuffle Repeat Repeat A to end Repeat A-B Angle Child Lock On Child Safe Resume Action prohibited ON SCREEN DISPLAY INFORMATION 15
Preparation General notes - Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Possible connections are shown in the following drawings. Please refer to the manuals of your TV,VCR, Stereo System or other devices as necessary to make the best connections. - Do not connect your DVD-player via your VCR.The video quality could be distorted by the copy protection system.
Connecting to optional equipment Connecting to an amplifier equipped with two channel analog stereo AMPLIFIER TV ● Connect the audio Left and Right out jacks of the DVD player to the audio left and right on your amplifier, receiver or stereo system, using the optional audio cable (D). Connecting to an amplifier equipped with two channel digital stereo (PCM) 1 Connect the player’s digital audio out jack (optical F or coaxial E) to the G F E 2 corresponding in jack on your amplifier.
Analog connection to a multi-channel A/V receiver with 6 CH connectors This DVD player contains a multi-channel decoder.This enables playback of DVDs recorded in Multi-channel Surround without the need for an optional decoder. AMPLIFIER 1 Connect the audio out jacks for Center speaker and Subwoofer connection (H) to the corresponding in jacks on your receiver. Note: If the subwoofer is equipped with its own amplifier, the Subwoofer connection should be connected to the subwoofer directly.
Connecting the power cord 1 Plug the female end of the supplied power cord into the Mains jack on the rear of the player. 2 Connect the other end of the cord to an AC outlet. Note: When the player is in the “STANDBY” mode, it is still consuming some power. If you wish to disconnect your player completely from the power, unplug the power cord from the AC outlet. Caution: Only qualified service personnel should remove the cover or attempt to service this device.
General explanation About this manual This manual gives the basic instructions for operating this DVD player. Some DVDs require specific operation or allow only limited operation during playback. In these cases, the player may not respond to all operating commands.When this occurs, please refer to the instructions contained with the DVD. When the symbol appears on the TV screen, the operation is not permitted by the player or the disc.
Turning On the power 1 Switch on the TV and select the video in jack channel for your DVDVideo player. 3D-SOUND PLAY OPEN/ CLOSE 2 Press STANDBY-ON or any other button ➤ The player display lights , and the ‘Initial Setup Screen’ appears. PAUSE The ‘Initial Setup’ will only appear the very first time you turn on the player. In ‘Initial Setup’, you may have to set your personal preferences for some of the player’s most relevant items. See ‘Initial Setup’.
The following items may have to be set in Initial Setup: Menu language Initial Setup Audio language Initial Setup Subtitle language English English Español Español Français Français Português Português Russian Russian Polish Polish LETTERBOX PAN SCAN The On Screen Menus will be displayed in the language you choose. You can choose from different languages. Audio language The sound will be in the language you choose if it is available on the disc in play.
- Black level shift (NTSC only) Adapts the color dynamics to obtain richer contrasts. Select ON or OFF. - Video shift The factory centers the video on your screen. Use this setting to personalize the position of the picture on your TV by scrolling it to the left or right. Sound - Digital output Factory setting: ALL.This means that both coaxial and optical outputs are switched on. If you are not connecting equipment with a digital input, change the setting to OFF.
Features - Access Control Access Control contains the following features: Child Lock - When Child Lock is set to ON, a 4-digit code needs to be entered in order to play discs. Parental control - Allows the conditional presentation of DVDs containing Parental Control information. (see ‘Access Control’) - Status Window Displays the current status of the player and is displayed with the menu bar.When disc playback is stopped, it is displayed with the ‘Temporary Feedback Field’ in the default screen.
Deauthorizing discs ● Insert the disc. See ‘Loading disc’. ➤ Playback starts automatically. ● Press 9 while { is visible. ➤ The | will appear and the disc is now deauthorized. Access control; Parental control (DVDVideo only) Movies on DVDs may contain scenes not suitable for children.Therefore, disc may contain ‘Parental Control’ information which applies to the complete disc or to certain scenes on the disc.
Changing the 4-digit code 1 When disc playback is stopped, select ACCESS CONTROL in the 2 3 4 5 6 7 Features menu using the w/v keys. Enter the old code. Move to CHANGE CODE using the w key. Press the u key. Enter the new 4-digit code. Enter the code a second time and reconfirm by pressing OK. Press t to exit the menu. Note: If you forget your 4 digit code, it can be cancelled by pressing 9 four times in the ‘Access Control’ dialog.You can then enter a new code (twice!) as described above.
Operation Loading discs / 3D-SOUND PLAY OPEN/ CLOSE 1 Press OPEN/CLOSE on the front of the player.The disc tray opens. 2 Load your chosen disc in the tray, label side up (also when a double PAUSE 3 sided DVD is inserted). Make sure it is sitting properly in the correct recess. Gently push the tray, or press OPEN/CLOSE, to close the tray. ➤ READ appears in the status window and on the player display, and playback starts automatically.
Playing a Video CD Playing a disc - After inserting the disc and closing the tray, playback starts automatically and the status window and the player display show the type of disc loaded, as well as information about the disc’s contents and playing time. - The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical key. - The currently playing track number is displayed in the menu bar and the player display.
Slow Motion ● Select f (Slow motion) in the menu bar. ● Use the w keys to enter the Slow Motion menu. ➤ The player will now go into PAUSE mode. ● Use the cursor keys t u to select the required speed: -1, -1/2, -1/4 or 1/8 (backward), or +1/8, +1/4, +1/2 or +1 (forward). ● Select 1 to play at normal speed again. ● If ; is pressed, the speed will be set to 0. ● To exit slow motion mode, press 2 or v. You can also select Slow Motion speeds by using the remote control.
Repeat A-B A -B REPEAT To repeat a sequence in a title: ● Press REPEAT A-B at your chosen starting point; ➤ A- appears briefly on the screen. ● Press REPEAT A-B again at your chosen end point; ➤ A-B REPEAT appears briefly on the display, and the repeat sequence begins.(A-B REPEAT is displayed on the front panel of the player) ● To exit the sequence, press REPEAT A-B. Scan SCAN Plays the first 10 seconds of each chapter/index on the disc. ● Press SCAN.
Zoom ● ● ● ● ● ● ● The Zoom function allows you to enlarge the video image and to pan through the enlarged image. Select a (Zoom) in the menu bar. Press w/v to activate the ZOOM function and select the required zoom factor: 1.33 or 2 or 4. ➤ The player will go into Pause mode. ➤ The selected zoom factor appears below the Zoom icon in the menu bar and ‘Press OK to pan’ appears below the menu bar. ➤ The picture will change accordingly. Press OK to confirm the selection.
If you wish to erase all selections: ● In STOP mode, select Video FTS c in the menu bar. ● Use w to select CLEAR ALL. ● Press OK. ➤ All selections will now be erased. ● Press MENU OSD to exit. Special DVD-features Checking the contents of DVD-Video discs: Menus For titles and chapters, selection menus may be included on the disc. The DVD’s menu feature allows you to make selections from these menus. Press the appropriate numerical key; or use the w, v, u, t keys to highlight your selection, then press OK.
Special VCD-Features Playback Control (PBC) When PBC ON ● Press PBC ON/OFF to ON ● Load a Video CD with PBC and press 2. ➤ The PBC menu appears on the TV screen. ● Go through the menu with the keys indicated on the TV screen until your chosen passage starts to play. If a PBC menu consists of a list of titles, you can select a title directly. ● Enter your choice with the numerical keys (0-9). ● Press RETURN to go back to the previous menu. When PBC OFF ● Press PBC ON/OFF to OFF.
Moving to another track ● Press P briefly during play to go to the next track. ● Press O briefly during play to return to the beginning of the current track. Press O briefly again to step back to the previous track. ● To go directly to any track, enter the track number using the numerical keys (0-9). Shuffle ● Press SHUFFLE during play. ➤ The order of the tracks is changed. ● To return to normal play, press SHUFFLE again. Repeat track/disc ● To repeat the currently playing track, press REPEAT.
FTS (Favorite Track Selection) - The FTS feature allows you to store your favorite tracks for a particular disc in the player memory. - Each FTS program can contain 20 tracks. - Each time an FTS program is played it will be placed on top of the list. When the list is full and a new program is added, the last program in the list will be removed from the list. - The selections can be called up and played at any time. Storing an FTS Program 1 Load a disc and stop playback.
Before requesting service If it appears that the DVD-Video player is faulty, first consult this checklist. It may be that something has been overlooked. Under no circumstances attempt to repair the system yourself; this will invalidate the warranty. Look for the specific symptom(s).Then perform only the actions listed to remedy the specific symptom(s). Symptom Remedy No power Check if both plugs of the power cord are properly connected.
Cleaning discs Some problems occur because the disc inside the player is dirty.To avoid these problems clean your discs regularly, in the following way: ● When a disc becomes dirty, clean it with a cleaning cloth.Wipe the disc from the center out. Caution: Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for analog discs.
Specifications PLAYBACK SYSTEM DVD-Video Video CD CD (CD-R and CD-RW) CABINET Dimensions (w x h x d) Weight PACKAGE CONTENTS DVD-Video Player Universal Remote Control Power cord User Manual S-Video cord Audio/Video cord OPTICAL READOUT SYSTEM Lasertype Semiconductor AlGaAs Numerical Aperture 0.60 (DVD) 0.
