Mode d’emploi
Philips Consumer Eiectronics Company Factory Service Center Locations NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to obtain efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge Service. For Out-of-Warranty service, call the location nearest you.
Quality service is as close as your telephone! Simply look over the list below for the number of a Factory Service Center NEAR YOU. Your product will receive efficient and expedient carry-in, mail-in, or in-home service, and you will receive peace of mind, knowing your product is being given the expert ahention of Philips’ Factory Service. And, if the phone number listed for your area IS LONG DISTANCE, CALL 1-800-242-9225 for Factory Service.
Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your pur chase at once. And take advantage of these important benefits. . Warranty i Verification . Owner I Confirmation .
SAFETY PRECAUTIONS CAUTION: This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location - see service procedure. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personai safety, improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
IMPORTANT SAFETY INSTRUCTIONS 12. Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. 13. Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious dam age to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manu facturer, or sold with the product.
Introduction 3 Precautions Notes on Handling When shipping the DVD video piayer, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD video player. Do not leave rubber or plastic products in contact with the DVD video player for a long time. They will leave marks on the cabinet.
Introduction J Table of Contents ^ Introduction ■ SAFETY PRECAUTIONS..........................................3 ■ IMPORTANT SAFETY INSTRUCTIONS.............4. 5 ■ Precautions................................................................ 6 Identification of Controls................ .8-11 Front Panel / Rear Panel / DVD display Remote Control Preparing the Remote Control Operating with the Remote Control ^ Connections Connecting to a TV.................................................
Introduction ) Identification of Controls See the page in I ^ for details.
Pressing of the FL-DIM button on the remote control changes the brightness of the display.
Introduction J Identification of Controls (continued) The instructions in this manual describe the functions on the remote control. See the page number inside the details.
Preparing the Remote Control Insert the batteries into the remote control so you can use it to operate the DVD video player. Operating with the Remote Control This section shows you how to use the remote control. Point the remote control at the remote sensor on the DVD video player and press the buttons.
Connections J For details of output sound, see . Connecting to a TV Connect the DVD video player to your TV. Connecting to a TV Selecting the output sound From the on-screen displays, set the “Audio Out Select” to “Analog 2ch.” To wall outlet manual for details. ^Notes^ ' Refer to the owner’s manual of the connected TV as well. ' When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.
Connections J For details of output sound, see |||>. Connecting to an Audio System and TV with Coior Difference inputs You can listen to the sound of discs in stereo and enjoy the enhanced picture quality of discs on a TV equipped with color difference inputs. Connecting to an Audio System and TV with Color Difference Inputs Selecting the output sound From the on-screen displays, set the “Audio Out Seiecf to “Anaiog 2ch.
Connections J For details of output sound, see (29^. Connecting to Optional Equipment You can enjoy high quality dynamic sounds by connecting the DVD video player to optional audio equipment. For connection to your TV, see pages 12 and 13. Select the connection type depending on your audio equipment.
Warning • Do not set “Audio Out Select" to “Bitstream” from the menu (sg) [38^ unless you are connecting (via the BITSTREAM/PCM AUDiO OUT jack) an AV decoder that has the Doiby Digitai, Digitai Theater Systems (DTS) or MPEG2 decoding function. High voiume sound may damage your hearing as weii as the speakers. • When piaying DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the anaiog stereo jacks.
Basic Playback ^ CAUTION Keep your fingers well clear of the disc fray as it is closing. It may cause serious personal injury. Playing a Disc POWER indicator II PAUSE DVD display This section shows you how to play a disc. Basic Playback Preparations • When you want to view a disc, turn on the TV and put the TV in Auxiliary (Line) input mode. • When you want to enjoy the sound of discs from the audio system, turn on the audio system and set the amplifier to receive Auxiliary input.
1 ■MENU ■ ENTER ■ ■/EJECT ■ JOG/PAUSE To obtain a higher quaiity picture Occasionally, some picture noise may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this DVD video player, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.
Basic Playback J Playing a Disc (continued) • JOG/PAUSE ■ Jog dial Fast reverse Frame Fast forward by Frame SlowMotion Resuming • Shuttle ring You can play discs at various speeds, and resume playback from the location where you stopped piayback. DVD> VCD> ,VCDj? Using the Shuttle Ring You can play discs at various speeds by turning the shuttle ring. Press and hold JOG/PAUSE during playback. Using the Jog Dial You can advance or reverse a picture frame by frame from the jog dial.
/\ DVD:? ,VCD3 xn Resuming Playback from the Same Location You can stop playback and resume playback later from the same location on the disc. Press ■ /EJECT at the location where you want to interrupt playback. r The DVD video player memorizes the iocation where playback is stopped. I RESUME Press RESUME. The DVD video piayer resumes playback from the location where you stopped piayback.
Basic Playback ^ Locating a Specific Titie, Chapter, or Track DVD video disc Title 2 Chapter 2 ---------- VIDEO CD/Audio CD------------Chapter 3 Track 1 1 Track 2 1 Tracks 1 Track 4 1 Tracks 1 Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into tracks. You can quickly locate any specific title, chapter, or track.
If you know the chapter or track number you want to play, you can locate It directly. I Press T-C. EeZI Skip steps 1 and 2 if you are using a VIDEO CD/audio CD. You can fast forward or reverse through consecutive chapters or tracks. © The DVD video player starts playback from the selected chapter or track.
Advanced Playback ^ Location You can play a disc from the desired location. Locating a Specific Location On the Disc You can locate a specific iocation by entering its corresponding time (hours, minutes, seconds). T.C Press T-C twice. You may have to press further depending on the disc. Press the button repeatedly until the following indication appears. I E S S ] Press the number buttons to enter mmm the time.
Advanced Playback ) Playing Repeatedly You can play a specific title, chapter, track, or segment repeatedly. (Title repeat, chapter/track repeat, A-B repeat) ,DVDp VCDJ? ,CDP Repeating a Title, Chapter, or Track You can play the same title, chapter, or track repeatedly. (Title, chapter/track repeat) Begin playback of the title, chapter, or track you want to repeat. [|x> r I REPEAT o Repeating a Specific Segment You can play a specific segment repeatedly. (A-B repeat) REPEAT i Press REPEAT.
Advanced Playback ^ Playing in a Favorite Order Tirie:2 Chaplen»25^ TìHelì2 Cnaoten 12 rif - iLll You can combine your favorite tities, chapters, or tracks and play them in any order. You can program up to 28 selections into the memory. (Memory playback) Setting Titles, Chapters, or Tracks in a Favorite Order The DVD video player automatically plays titles, chapters, or tracks in the order you program. Io MEMORY Insert a disc and press MEMORY during stop.
■A/T/^/>- ■2 3 To change the programmed selections___________ 1 While the MEMORY menu appears on the TV screen, press A / T to move the highlighted bar to the item you want to change. 2 Change the selection following the instructions in step 2. To cancel the programmed selections____________ 1 While the MEMORY menu appears on the TV screen, press A / T to move the highlighted bar to the item you want to cancel. 2 Hold down the RETURN/CLEAR button for longer than one second.
Advanced Playback J Playing in Random Order You can play titles, chapters within a titie, or tracks in random order. (Random playback) ^DVD2 Playing Titles in Random Order The DVD video player automatically selects the titles in a DVD video disc and plays them randomly. Í SHUFFLE (2) Playing Chapters or Tracks in Random Order The DVD video player automatically selects chapters within a title, or tracks in a VIDEO CD/audio CD, and plays them randomly. Press SHUFFLE twice while playback is stopped.
Advanced Playback J •ZOOM Zooming a Picture RETURN/ CLEAR You can magnify areas within a picture. ^DVP2 Zooming a Picture You can zoom in on a picture and shift the zooming point as weii. Press ZOOM during normal, slow or still playback. If you further press the ZOOM button repeatedly, the magnification level increases. To resume normal playback ZOOM ) Press ZOOM repeatedly so that “Zoom” disappears. Zoom 1 Zoom 2 Zoom 3 To reduce the magnification level, press the RETURN/CLEAR button.
Advanced Playback ^ Selecting the Camera Angle RETURN/ CLEAR A preferred angle can be selected from several angles. DVP> Changing the Camera Angle If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are watching. B ANGLE Press ANGLE whiie piaying a scene recorded with muitipie angies. While playing a scene recorded with multiple angles, the angle icon (Q) appears in the DVD display and on the TV screen.
Advanced Playback ) Selecting a Language ■RETURN/ CLEAR A preferred language can be selected from several languages. 1,2 ^DVD5 Selecting a Playback Audio Setting You can select a preferred language and sound recording system from those included on the DVD video disc. io AUDIO About recording systems Press AUDIO during playback. The current audio setting appears for about 3 seconds.
Advanced Playback ^ Selecting Subtitles RETURN/ CLEAR Good evenlngl-j Bonsoirl 1 You can display subtitles on the TV screen and select a preferred subtitle language. •SUBTITLE ,DVD2 Selecting a Subtitle Language Turning Subtitles On or Off You can select whether to display subtitles or not. SUBTITLE (q) ____ DVDi Press SUBTITLE during playback. The current subtitle setting appears for about three seconds. You can select a subtitle language from those included on the DVD video disc.
Advanced Playback J Using the On-Screen Display You can view information about a disc and its operationai status on the TV screen. Checking the Operational Status You can view the current title number, track number, and total playing time of the disc on the TV screen. №D Press OSD while playback is stopped. Each time you press the OSD button, the on-screen display changes as follows.
Function Setup ^ Customizing the Settings № 'to) flCrURE ; AUDIO ■2 -2 IS ^ DISPLftY OP6RMIOW You can change the default settings to customize performance to your preference. Selecting a Setting Category The setting menu asks you to select a setting for LANGUAGE, PICTURE, AUDIO, DISPLAY and OPERATION. Each selected category will provide you setting details. SETUP Press SETUP during stop. The setting menu appears. i I Press ◄ / ►■ to select the category.
Details Setting On-Screen Language r r Disc Menu Language To select a preferred language for disc menus. Audio Language ¿VD? To select a preferred language for the sound track. 34 34 35 35 Subtitle Language To select a preferred language for subtitles. TV Shape To select a picture size according to the aspect ratio of your TV. 36 Black Level To select the black level (contrast) of playback pictures.
Function Setup ^ Customizing the Settings (continued) After you select LANGUAGE [32>, adjust the categories to your preference. LANGUAGE Setting I (Continued from page 32.) ®i® ENTER Press A / T to select the item, then press ENTER. On-Screen Language <3^ O Select a preferred language by pressing a ®o® ^ O On-Scre«n lonquaqe Due Menu languoge Audio Language Subrille Languoge QH is3a French Spanish / T, then press ENTER. If you do not adjust any other settings, proceed to step 4.
•MENU ■3 ■3 HtJUMN o Audio Language If you press the RETURN/CLEAR button while a menu appears on the screen, you will return to the previous menu screen. ,dvd;> LNItH o njoi ovLtT anpi LANGUAGE lOft'Satenlongueg« |Dit
Function Setup J Customizing the Settings (continued) PICTURE After you select PICTURE adjust the categories to your preference. PICTURE Setting I ©O o 0 (Continued from page 32.) Press A / T to seiect the item, then press ENTER. ENTER O TV Shape 4:3 LetterBox: Select when a 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. 4:3 Normal: Select when a 4:3 TV is connected. Displays pictures cropped to fill your TV screen.
■3 ■3 HtZiVtVi : if you press the RETURN/CLEAR button while a menu appears on the screen, you will return to the previous menu screen. Black Level ^ Enhanced: Increased black level (contrast). Normal: Standard black level (contrast). JSSfiL IVSkw tlFTn 1 'rfSInTiHNrml 1 Erihan»d _v /~S ^ Selectme the blackicv level by pressing ▲ / T, ocici^i uiciuiv then press ENTER. -> If you do not adjust any other settings, proceed to step 4. i »TUP Press SETUP. The setting menu disappears.
Function Setup J Customizing the Settings (continued) After you select AUDIO HD, adjust the categories to your preference. AUDIO Setting I (Continued from page 32.) ® i® Press A / T to seiect the item, then press ENTER. bNltH O c!SS^ Audio Out Seiect Select the output sound type according to your system connection. El fAUDiOl AodioOutS*I«l i-fifii.L'-'i.
3 ■3 RETURN/ CLEAR HtIUKN o If you press the RETURN/CLEAR button while a menu appears on the screen, you will return to the previous menu screen. When you select “Analog 6Ch” ( Make the follow settings for the built-in 5.1 ch surround decoder. 1) Select an item by pressing the a / t buttons, and press the ENTER button. 2) Make the settings (see below) by pressing ENTER button. turn 1 C{C«nl«r]$peok«r S{SvrrMmd}SpMker Subwoofer Center Channel May ihe A.
Function Setup ^ Customizing the Settings (continued) '^))) AUDIO AUDIO Setting (continued) (Continued) Dynamic Range Control On: Dynamic range is reduced. Off: Fuil dynamic range is heard. (audioi 1 Audio Out Stled Dynamic longe Control Karooke Vocal E)3 Extended Audio Features IS] ЗD[N-^3] Eia lonHH Off ENTER Select “On” or “Off” by pressing A / T, (3 then press ENTER. © -> If you do not adjust any other settings, proceed to step 4.
■3 ■3 neiuMN : If you press the RETURN/CLEAR button while a menu appears on the screen, you will return to the previous menu screen. O 3D (N-2-2) ^ ¿cop 3-D (N-2-2) Sound Enhancement You can enjoy expansive surround type effects from two speakers. On: The 3-D (N-2-2) Sound enhancement functions. Off: The 3-D (N-2-2) Sound enhancement does not function.
Function Setup ^ Customizing the Settings (continued) DISPLAY After you select DISPLAY [^, adjust the categories to your preference. DISPLAY Setting I (Continued from page 32.) Cv) Press A / T to select the item, then press ENTER. ENTER O On-Screen Displays On: Operational modes are displayed on-screen, (e.g. “Play”, Q) Off: Operational modes are not displayed. OivScreen Disalovs i»?Tl OSD Bodcgrowd Color PTW Extonded Svbride Features ScreenSover 0» _ Cv) _ .
■3 ■3 press the RETURN/CLEAR button while a menu appears on the screen, you will O: If you return to the previous menu screen. Screen Saver On: The screen saver works. Off: The screen saver does not work. PWIAY On-SoMfi Ditpioys OSD Bodcground Color PB Pffl Off ExHnMSubltiloFoc^t -----------------al E3 © ^ EOTER Select “On” or “Off” by pressing A / T, then press ENTER. -> If you do not adjust any other settings, proceed to step 4. i srrup Press SETUP. The setting menu disappears.
Function Setup J Customizing the Settings (continued) After you select OPERATION adjust the categories to your preference. OPERATION Setting S (Continued uea rrom from page 32.) ®S® bNIbH Press A / T to select the item, then press ENTER. Pause/Still ¿VD? O Pouie/Sfl] BES Parenld Lode P!TÌ KeoMleConfìrnMtwn TirieStep PK E3 Auto: For normal use. Pictures can pause without shaking.
RETURN/ CLEAR ■3 ■3 l/EJECT ■ Number buttons ttCIUMN O : If you press the RETURN/CLEAR button while a menu appears on the screen, you will return to the previous menu screen. When you select “On” [44>: 1) Press the ◄ / ► buttons to select the country whose standards were used to rate the DVD video disc. Level/ Level6 Levels tevel4 levels levels Levell 2) Press the A / T buttons to select the parental lock level, then press the ENTER button.
Function Setup ^ Customizing the Settings (continued) OPERATION Setting (continued) (Continued) Remote Confirmation ¿3? P <4) ® PTTP! 0» PauM/Slil Por«nldted( Remete Cen5rmetíen Tille Step PBC E21S3 foiri E2] [¡a <3^ On: Beeper sounds with each press of a remote control button. Off: The beeper does not sound. 0 0 Seiect “On” or “Off” by pressing A / T, then press ENTER. ^ If you do not adjust any other settings, proceed to step 4.
■3 ■3 KBIU№4 o i SETUP : If you press the RETURN/CLEAR button while a menu appears on the screen, you will return to the previous menu screen. Press SETUP. The setting menu disappears.
Function Setup J Operating Other Equipment with the Remote Contrai ■ENTER -JOG/PAUSE ■RETURN/ CLEAR You can operate the basic functions of selected TVs, amplifiers, and receivers using the supplied remote control. Programming the Remote Control Brand Code Table You can operate other equipment with the DVD video piayer’s remote controi. RETURN i O CLEAR Press and hold RETURN/CLEAR and ENTER simultaneously until JOG/ PAUSE lights up. ENTER O Release RETURN/CLEAR and ENTER.
Buttons to operate TV Amplifier Receiver ^У!I ITC To mute the sound. To mute the sound. To mute the sound. T\/ nH fA.f \ To select channels. 1 V VUL ^+/ ) To turn up or down the volume. To turn up or down the volume. To turn up or down the volume.
Function Setup ^ Table of Languages Table of Languages and Their Abbreviations Abbreviation of the Language — CHI (ZH) OUT (NL) ENG (EN) FRE (FR) GER (DE) ITA (IT) JPN (JA) KOR(KO) MAY (MS) SPA (ES) AA AB AF AM AR AS AY AZ BA BE BG BH Bl BN BO BR CA CO CS CY DA DZ EL 50 Language No alternate language Chinese Dutch English French German Italian Japanese Korean Malay Spanish Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Belorussian Bulgarian Bihari Bislama Bengali, Bangla T
others J Notes on Discs On Handling Discs Playable Discs ' Do not touch the playback side of the disc. This DVD video player can play the following discs. Disc mark Playback side Do not attach paper or tape to discs. Cieaning Discs DVD video discs Audio + mJVl> Video m (moving pictures) COMPACT VIDEO CDs ' Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outward with a soft cioth. Always keep the disc clean.
others 3 Before Calling Service Personnel Check the following guide for the possible cause of a problem before contacting service. Symptoms and Correction Symptom Cause Correction Page No power • The power plug is disconnected. • Connect the power plug securely into the wall outlet. 12,13 No picture • The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the TV so the picture from the DVD video player appears on the TV screen.
others J Specifications DVD Video Player / Outputs / Supplied Accessories [DVD Video Player] Power supply 120 VAC, 60 Hz Power consumption 19W Mass 3.
Philips Consumer Electronics Company Factory Service Center Locations NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to obtain efficient and expedient repair for your product. If your product is in-Warranty, you should have proof-of-purchase to ensure No Charge Service. For Out-of-Warranty service, call the location nearest you.
Quality service is as close as your telephone! Simply look over the list below for the number of a Factory Service Center NEAR YOU. Your product will receive efficient and expedient carry-in, mail-in, or in-home service, and you will receive peace of mind, KNOWING your product IS BEING GIVEN THE EXPERT AHENTION OF PHILIPS’ FACTORY SERVICE. AND, IF THE PHONE NUMBER LISTED IS LONG DISTANCE, CALL 1-800-242-9225 FOR FACTORY SERVICE.
LIMITED WARRANTY DVD VIDEO PLAYER 90 Days Free Labor One Year Exchange Warranty on Parts This product must be carried in for repair. WHO IS COVERED? MAKE SURE YOU KEEP... You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Please keep your sales receipt or other document showing proof of purchase. Attach it to this owner’s manual and keep both nearby.
