Digital Video Disc and Super Audio CD Player Owner's Manual DVD795SA Important! Return your Warranty Registration Card within 10 days. See why inside. NEED HELP? CALL US! REPRESENTATIVES ARE READY TO HELP YOU WITH ANY QUESTIONS ABOUT YOUR NEW PRODUCT. WE CAN GUIDE YOU THROUGH CONNECTIONS, FIRST-TIME SETUP, AND ANY OF THE FEATURES. WE WANT YOU TO START ENJOYING YOUR NEW PRODUCT RIGHT AWAY. PHILIPS CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT. 1-800-531-0039 OR VISIT US ON THE WEB AT WWW.PHILIPS.
Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Table of Contents 3 General Information Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Information Safety Precautions Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this equipment void the user’s authority to operate it. Laser Safety This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
Safety Information (cont’d) 5 IMPORTANT SAFETY INSTRUCTIONS. READ BEFORE OPERATING EQUIPMENT. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
Introduction Welcome! We hope you enjoy this DVD/SACD Player and learn to appreciate its features. Read this manual carefully to learn to use the following features.
Playable Discs 7 Playable Discs This Player will play Digital Video Discs (DVDs), Video Compact Discs (VCDs), Super Video CDs, Audio CDs, and Super Audio CDs. This Player also will play MP3 files (music tracks compressed with MPEG Audio Layer 3 technology) recorded onto a Compact Disc Recordable (CD-R) or a Compact Disc Rewritable (CD-RW). Discs having the following logos should play on this Player. DVDs must also meet the Region Code and Color System requirements described below.
Hookups Determining the best possible connection... Your existing equipment, especially your TV, will determine your connection possibilities. However, the following guidelines describe which options provide the best picture and sound quality. HHHH Component Video provides the best picture quality. Details are on page 12. HHH S-Video provides excellent picture quality. Details are on page 11. HH Composite Video (a yellow Video jack) provides good picture quality. Details are on page 10.
Hookups (cont’d) 9 Connecting to a TV Only TV has only a single Antenna In or RF-In jack Back of TV (example only) 3 Back of RF Modulator (example only) ANT IN TO TV VIDEO IN AUDIO R 6 IN L CH3 CH4 ANTENNA IN RF IN Antenna or Cable TV Signal 1 5 4 2 Before you begin, make sure you have an RF modulator and extra RF coaxial cables. These are not supplied with the Player, but are available from Philips or most consumer electronics retailers.
Hookups (cont’d) Connecting to a TV Only TV has a yellow Video In jack 2 Back of TV (example only) LEFT AUDIO IN RIGHT AUDIO IN VIDEO IN 4 LEFT AUDIO IN RIGHT AUDIO IN VIDEO IN 1 3 1 Connect the supplied yellow video cable to the Player’s yellow CVBS (VIDEO OUT) jack and to the corresponding VIDEO IN jack on your TV. There are two CVBS (VIDEO OUT) jacks in case you want to connect the Player to two separate TVs.
Hookups (cont’d) 11 Connecting to a TV Only TV has an S-Video In Jack Back of TV (example only) LEFT AUDIO IN RIGHT AUDIO IN S-VIDEO IN 4 LEFT AUDIO IN RIGHT AUDIO IN S-VIDEO IN 1 2 3 1 2 Connect an S-Video cable (not supplied) to the Player’s SVIDEO (VIDEO OUT) jack and to the TV’s S-VIDEO IN jack. 3 4 5 6 Set the Progressive/Interlace switch on the rear of the Player to Interlace.
Hookups (cont’d) Connecting to a TV Only TV has Component Video In (Interlace) Jacks OR TV has Progressive Scan Component Video In Jacks 1 Back of TV (example only) Y Pb/Cb RIGHT AUDIO IN LEFT AUDIO IN Pr/Cr Y Pb/Cb LEFT AUDIO IN 4 RIGHT AUDIO IN Pr/Cr 2 3 1 2 Connect the Player’s Pr/Cr Pb/Cb Y (VIDEO OUT) jacks to the corresponding Pr/Cr Pb/Cb Y VIDEO IN jacks on the TV. Use component video cable (not supplied).
Hookups (cont’d) 13 Connecting to a TV and a two-channel Stereo (Stereo has Dolby Pro Logic or right/left Audio In jacks) 1 2 Back of TV (example only) Stereo (example only) VIDEO IN RIGHT AUDIO IN 4 LEFT AUDIO IN VIDEO IN 3 1 Connect the supplied yellow video cable to the Player’s yellow CVBS (VIDEO OUT) jack and to the corresponding VIDEO IN jack on your TV. There are two CVBS (VIDEO OUT) jacks in case you want to connect the Player to two separate TVs.
Hookups (cont’d) Connecting to a TV and a Digital Stereo (Receiver has PCM, Dolby DigitalTM, MPEG2, or Digital Theater System) Digital Stereo (example only) Back of TV (example only) 2 VIDEO IN 4 COAXIAL DIGITAL AUDIO IN VIDEO IN 3 1 1 Connect the supplied yellow video cable to the Player’s yellow CVBS (VIDEO OUT) jack and to the corresponding VIDEO IN jack on your TV. There are two CVBS (VIDEO OUT) jacks in case you want to connect the Player to two separate TVs.
Hookups (cont’d) 15 Connecting to a TV and to a Six-channel Receiver (Dolby Digital or DTS) Receiver (example only) Back of TV (example only) VIDEO IN MULTICHANNEL AUDIO IN SURROUND SUB WF FRONT VIDEO IN 2-4 R L L SURROUND CENTER FRONT 1 6 5 1 Connect the supplied yellow video cable to the Player’s yellow CVBS (VIDEO OUT) jack and to the corresponding VIDEO IN jack on the TV. There are two CVBS (VIDEO OUT) jacks if you want to connect the Player to two separate TVs.
Hookups (cont’d) Connecting to a TV and a Cable Box or Satellite Receiver 2 LEFT AUDIO IN ANT IN TO TV VIDEO IN AUDIO R RIGHT AUDIO IN IN L VIDEO IN CH3 CH4 Satellite or Cable TV Signal Back of Cable Box or Satellite Receiver (example only) ANTENNA IN RF IN LEFT AUDIO IN RIGHT AUDIO IN VIDEO IN 1 4 3 Back of DVD Player Back of DVD Player (lower left corner) If you want to connect other equipment to the TV and DVD Player, make sure the DVD Player is still connected directly to the TV.
Quick Disc Playback 17 3-4 1 DVD 795SA 5 3 5 Turn on your TV. Set it to the correct Video In channel. This is not channel 3 or 4 (as it might be for a VCR), but a distinct Video In channel. (When using an RF modulator as described on page 9, the Video In channel is 3 or 4.) You should see the Player’s blue background screen on the TV. If you cannot find the correct Video In channel, see your TV owner’s manual. Press OPEN/CLOSE c on the Player to open the disc tray.
Remote Control Buttons H (Previous) Button Press and hold for two seconds to search backward during playback. Press repeatedly to return to a previous Chapter/Track or to the beginning of the current Chapter/Track. Details are on pages 23-24. STOP C Button Press to stop Disc playback. SUBTITLE Button Press to select an available subtitle language. Details are on page 28. REPEAT Button Press repeatedly to play a Chapter, Title, Track, or entire Disc repeatedly. Details are on page 27.
Front Panel 19 STANDBY-ON y Button Press to turn the Player on or off. The Standby light is red when the Player is in Standby mode (power off). The light does not appear if the power is on. SACD, MULTI CH, PROGRESSIVE lights These lights appear if the corresponding feature is active. The SACD light indicates a Super Audio CD is the current Disc. Details are on page 37. The MULTI CH light indicates Multi-channel playback is available. Details are on pages 15 and 44.
Rear Panel AC Power cord Connect to a standard AC outlet to supply power to the Player. COAXIAL (DIGITAL AUDIO OUT) Connect an optional audio coaxial digital cable here and to the coaxial digital Audio In jack of a Stereo. Details are on page 14. OPTICAL (DIGITAL AUDIO OUT) Connect an optional audio optical cable here and to the optical digital Audio In jack of a Stereo. Details are on page 14. When the OPTICAL jack is not in use, replace its protective cap.
System Menu Bars 21 Use the System Menu Bars to operate features. Press SYSTEM MENU on the remote control repeatedly to select System Menu Bar 1, System Menu Bar 2, or System Menu Bar 3. Press SYSTEM MENU again to remove all the System Menu Bars from the TV screen. Press 9 8 ; : on the remote control to select items or to change the setting of an item. System Menu Bar 1 User Preference Settings Set your preferences for audio and video quality, depending on the equipment you connected to the Player.
On-screen Symbols, Bit Rate Indicator On-Screen Symbols The following symbols appear in the top left corner of the TV screen when you activate a feature. scan Scan The first 10 seconds of each Chapter or Track will play. Details are on page 29. A-B 2/2 repeat Repeat All The entire Disc will play repeatedly. Details are on page 27. title Repeat Title The current Title will play repeatedly. Details are on page 27. chapter Repeat Chapter The current Chapter will play repeatedly.
Title/Disc Menus, Chapter/Track Selection 23 DVD POWER 2 Title/Disc Menus 1 2 3 4 5 6 7 8 9 DISPLAY RETURN Press 9 8 ; : on the remote control to select items in the menu, then press OK to continue. Continue until you set up all the features you want. If you do not start playback from the menu, press DISC MENU to remove the menu. 0 DISC 1,3 SYSTEM MENU É 2 3 Press DISC MENU. If the current Title of the current Disc has a menu, the Title menu will appear on the screen.
Forward and Reverse Searching, Slow Motion SACD POWER 2 Forward and Reverse Searching 1 2 On a DVD or Video CD, to search the Disc at four times the normal speed, press and hold H or G for about two seconds during playback. To search at 32 times the normal speed, press and hold H or G again. The sound will be mute. On an Audio CD or SACD, to search the Disc at four times the normal speed, press and hold H or G for about two seconds during playback. Sound will be intermittent.
Still Picture/Frame-by-Frame Playback, Time Search 25 DVD VIDEO CD POWER Still Picture/Frame-by-Frame Playback To advance the still picture one frame at a time, press PAUSE k repeatedly. To resume normal playback, press PLAY :. T-C SOUND MODE DIM 1 2 3 4 5 6 7 8 9 DISPLAY RETURN 0 DISC SYSTEM É 1,2 MENU MENU É OK É G É 1 2 3 During playback, press PAUSE k on the remote control. A still picture will appear on the TV screen.
Zoom, Camera Angle DVD VIDEO CD POWER 2 Zoom DISC Zooming lets you enlarge the video image during playback and pan through the enlarged image. Within five seconds, press 8 or 9 to choose 1.33, 2 or 4. The picture will play at 1.33, 2, or 4 times the normal size. 2-5 2 3 4 5 6 7 8 9 DISPLAY RETURN 0 H E a o 2 p Press OK to pan To move within the enlarged picture, or “pan,” press OK. Then, press 9 8 ; : to move to the bottom, top, left, or right of the picture.
Repeat, Repeat A-B 27 AUDIO CD VIDEO CD SACD POWER 2 Repeat DISC You may play a Chapter, Track, Title, or entire Disc repeatedly. 2 To cancel repeat playback, press REPEAT again. REPEAT OFF will appear on the display panel. 1 2 3 4 5 6 7 8 9 DISPLAY RETURN 0 DISC 1,2 SYSTEM MENU É 1 During playback, press REPEAT repeatedly to choose a Repeat mode. ● To repeat the current Chapter/Track, press REPEAT once. REPEAT CHPT or REPEAT TRK will appear on the display panel.
Audio Language, Subtitles POWER DVD 2 Audio Language DISC Some DVDs are recorded in different languages. You may be able to watch the same movie in French, Spanish, etc. The movie may have special audio features, such as a director’s commentary or music soundtrack. If these are available on the DVD, access the different languages or featured soundtracks by following these steps.
Scan, Shuffle 29 DVD AUDIO CD VIDEO CD SACD POWER Scan 2 2 To continue playback from a Chapter/Track, press SCAN again or press PLAY :. SCAN OFF will appear briefly on the Player’s display panel. Otherwise, scanning stops at the end of the Disc. T-C SOUND MODE DIM 1 2 3 4 5 6 7 8 9 DISPLAY RETURN 0 DISC SYSTEM MENU É 1 Press SCAN during playback. Starting at the beginning of the current Chapter/Track, the first 10 seconds of each Chapter/Track will play.
Access Control DVD VIDEO CD POWER Access Control limits viewing of Discs that exceed the limits you set. This feature will not limit viewing if the Disc manufacturer did not code the Disc. Philips cannot guarantee the availability of Access Control with all Discs, and therefore denies any liability associated with unintended watching of Discs. Make sure your Discs play according to your Access Control settings before you allow children access to the Player.
Access Control (cont’d) 31 Play Once/Play Always With Play once or Play always, you can disable or enable viewing of a specific Disc. The Player memorizes settings for 120 Discs. When you select Play Always, the current Disc moves to the top of the list. When the list is full and you add a new Disc, the last Disc in the list will drop out of the list. 1 Insert a Disc. The Access Control message will appear on the TV screen if the current Disc is Locked. PIN will appear on the Player’s display panel.
Access Control (cont’d) Setting Parental Levels DVDs may contain alternative scenes that conform to the Parental Level, or movie rating, that you select. The Parental Level may apply to the complete Disc or to certain scenes on the Disc. Follow the steps below to set the Parental Level at which you want DVDs to play. The DVD manufacturer must have coded the Disc in order for the Parental Level to block viewing of the DVD. Check your Disc case for details. will be highlighted.
Access Control (cont'd) 33 Changing the Country If a DVD has Parental Level coding, the codings are applicable only for the country specified on the Disc. The DVD manufacturer sets these codings. For example, a DVD may be coded at Level 3 for the United States. So, for some DVDs, you may need to choose the Country for which the Disc is coded in order for the DVD to play at the Parental Level you select. Parental Level details are on page 32. T-C SOUND MODE DIM 1 2 3 4 5 6 7 8 9 , then press :.
Favorite Track Selection Favorite Track Selection (FTS) lets you play your favorite Tracks in the order you select. A Program can contain 100 Tracks from Super Audio CDs, Audio CDs, MP3 (files on CD-R or CD-RW), Video CDs, or Super Video CDs. POWER 2 Setting a Program 1 DISC Press OPEN/CLOSE c on the front of the Player. Load up to five Discs in the Player. Press OPEN/CLOSE c again to close the disc tray. c Favorite Track Selection will be selected in the System Menu Bar.
Audio CD FTS 35 AUDIO CD POWER 2 An Audio CD Favorite Track Selection (FTS) lets you play your favorite Tracks in the order you set. An FTS Program can contain 20 Tracks. DISC T-C SOUND MODE DIM Setting a Program 1 2 3 1 4 5 6 7 8 Audio Disc Mode Total tracks Total time 14 0.43.49 Track Time --.--.-FTS p On Off Track 1 2 3 4 5 6 7 8 > Program Clear all 2 3 Press 9 to select the Track line in the FTS menu.
MP3 Playback MP3 is a compression method that makes digital music files up to 10 times smaller without losing significant sound quality. MP3 is common on the Internet, letting you transfer Tracks to your computer and onto a CD Recordable or CD Rewritable disc. Materials and equipment with which to make MP3 recordings are not supplied with this Player. MP3 files are recorded at a certain bit rate or speed.
SACD Sound Mode 37 There are three types of Super Audio CDs: single-layer, dual-layer, and hybrid. Each may contain two areas of recorded audio or sound modes: High Quality Stereo and High Quality Multi-channel. A single-layer SACD may contain both Stereo and Multi-channel. A dual layer SACD may contain both Stereo and Multi-channel, but twice the amount. Hybrid SACDs have two layers, the CD and SACD layers. Within the SACD layer are the SACD Stereo area and the SACD Multi-channel area.
Playback Control VIDEO CD POWER 2 Activating Playback Control (PBC) DISC This feature is available only on Video CDs. The Video CD must be compatible with Playback Control. Check the Video CD case for details. 2 1 2 3 4 5 6 7 8 Press RETURN to go to a previous menu. 9 0 1 SYSTEM MENU É DISC If a PBC menu has Titles, select a Title directly by pressing the Number buttons on the remote. 3 DISPLAY RETURN MENU É OK É G É 1 2 3 Load a Video CD with PBC and press PLAY :.
Z TV System (NTSC/PAL) 39 TV System (NTSC/PAL) Press 9 to select 2-4 T-C SOUND MODE DIM 1 2 3 4 5 6 7 8 9 DISPLAY RETURN 0 DISC SYSTEM MENU MENU É OK É G H STOP PLAY PAUSE Ç É Å SUBTITLE ANGLE Press 8 or 9 to choose PAL, NTSC, or Auto. Choose NTSC if your TV is NTSC-compatible and your DVDs are recorded in NTSC. Choose PAL if your TV is PAL-compatible and your DVDs are recorded in PAL.
Black Level Shift If you set the Player to NTSC, adjust Black level shift to improve the color contrast during Disc playback. Black level shift has no effect if the Player is set to PAL. POWER 2 DISC Press 9 to select Black level shift, then press :. Z 1en G r 4 5 , then press :. Y 1en TV Shape Black level shift Monitor Type Video shift Color settings Personal color TV System d st 1 2-4 1 2 3 4 5 6 7 8 9 0 DISC On Off Press 8 or 9 to select On or Off, then press OK.
TV Shape 41 TV Shape You may set the Player to display the DVD picture in one of three formats: Letterbox, Pan & Scan, or Wide. The TV Shape you select must be available on the DVD. If not, TV Shape settings will not affect the picture. Y , then press :. 2-4 TV Shape will be selected. Press :.
Clear Voice, Color Settings (Smart Picture) Clear Voice This feature enhances the dialog while playing DVDs recorded in 5.1 channel audio. This allows you to hear dialog and conversations more clearly while keeping down the overall volume. will be selected. Press 9 repeatedly to select Clear Voice, then press :.
Digital Output, PCM Output 43 Digital Output Adjust Digital output if you used one of the Player’s DIGITAL AUDIO OUT jacks (COAXIAL or OPTICAL) to connect the Player to a Stereo. POWER 2 DISC Press 9 repeatedly to select G, then press :. Digital output will be selected. Press :.
Analog Output If you connected the Player’s red and white AUDIO OUT or FRONT MULTICHANNEL AUDIO OUT jacks to a Stereo as shown on page 13, or if you connected the Player to a six-channel Receiver as shown on page 15, choose a setting for Analog Output. Check your Stereo or Receiver and see if it is compatible with Dolby Surround. Then, follow these steps to choose the Analog Output setting that is most compatible with your equipment. will be selected. Press 9 repeatedly to select G, then press :.
Speakers 45 The Player lets you adjust the speaker settings, volume balance, and delay time for your audio system. You only need to adjust the speaker settings if you used the Player’s MULTICHANNEL AUDIO OUT jacks to connect the Player to a six-channel Receiver (Dolby Digital or DTS) as shown on page 15. 2-5 Press 9 repeatedly to select Speakers, then press :. Press 8 or 9 to select the speaker you want to adjust, then press :.
CD Upsampling, IntelliPlay CD Upsampling CD Upsampling lets you adjust your CD’s sampling rate to improve the sound. You can increase the sampling rate from the standard 44.1 kHz/16 bit to the higher rates of 88.2 kHz/24bits or176.4 kHz/24bits. Or, you can turn off this feature. You also can turn the sampling rate on or off simply by pressing AUDIO on the remote control.
Wake-up Timer, Night Mode 47 Wake-up Timer This feature turns on the Player within an amount of time you select. Press 9 repeatedly to select Access control Status window PBC Beeper Help text Smart Power-off Wake up timer 1 2-5 d st 1 2 3 4 5 6 7 8 9 0 DISC 0 30 60 90 Press 8 or 9 repeatedly to select an amount of time after which you want the Player to turn on. The times vary from 30 minutes to 600 minutes in 30-minute increments.
Karaoke Vocal, Language Karaoke Vocal Turn on Karaoke Vocal when you are playing a Disc that has multiple karaoke channels. For example, perhaps lyrics are recorded on one channel, while the music is on a separate channel. Set Karaoke to On so the multiple channels will mix together, allowing you to hear both the lyrics and the music together in normal stereo sound. 2 DISC will be selected. Press 9 repeatedly to select G, then press :.
Smart Power-off, Beeper 49 Smart Power-off If Smart Power-off is enabled, the Player’s power will turn off if Disc playback stops and you do not use the Player or its remote control for 20 minutes. will be selected. , then press :. Press 9 repeatedly to select Smart Power-off. Press :.
Status Window, Help Text Status Window The Status window (example below) may indicate when the disc tray is opening or closing, what type of Disc is installed, and total or remaining Disc playback time. To set Status window to On or Off, follow these steps. POWER 2 DISC B DVD pause 2:45:23 0:00:34 2-4 2 3 4 5 6 7 8 9 0 , then press :. Press 9 to select Status window, then press :.
Specifications, Glossary 51 Specifications CABINET Dimensions (w x h x d): DTS/PCM MP3 (ISO 9660) Weight: 17.13 x 4.53 x 16.38 inches (435 x 115 x 416 mm) Approximately 13.01 lbs (5.9 kg) POWER SUPPLY Power supply Power consumption Standby power consumption 120V, 60 Hz Approximately 30W <1W TV STANDARD Number of lines Playback PAL/50Hz 625 Multistandard VIDEO PERFORMANCE CVBS VIDEO OUT S-VIDEO OUT Y Pr/Cr Pb/Cb NTSC/60Hz 525 (PAL/NTSC) 1 Vpp into 75Ω Y: 1 Vpp into 75Ω; C: 0.
Helpful Hints If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative.
Helpful Hints (cont'd) 53 Disc will not play. • Make sure the Disc label is facing up. If you are playing a two-sided Disc, make sure the side you want to play is facing up. Details are on page 19. • Check the Access Control settings for the Disc. Details are on pages 30-33. • Check the NTSC/PAL settings of the Disc and the Player. Details are on page 39. • Check the Region Code of the Disc. The Disc must be coded for All regions or Region 1 in order to play on this Player. Details are on page 7.
Limited Warranty Digital Video Disc Player / Five-Disc Changer 90 days Free Product Exchange / 91 days–One Year Reduced-Cost Exchange WHO IS COVERED? You must have proof of the date of purchase to exchange your product. A sales receipt or other document showing the date that you purchased the product is considered such proof. WHAT IS COVERED? Warranty coverage begins the day you buy your product.
Limited Warranty (cont’d) 55 EXCHANGE INSTRUCTIONS To exchange your product with Philips (per the warranty conditions stated previously), remember: • If you exchange the product within 90 days of the original purchase, there is no cost to you.* • If you exchange the product more than 90 days after but less than one year after the day of original purchase, contact Philips at 1-800-531-0039 to determine the preset cost for exchange.
Information Index ac power cord . . . . . . . . . . . . . . . . .20 access control . . . . . . . . . . . . . . .30-33 album . . . . . . . . . . . . . . . . . . . . . . . .34 analog output . . . . . . . . . . . . . . . . . .44 angle . . . . . . . . . . . . . . . . . . . . . . . . .26 angle button . . . . . . . . . . . . . . . . . . .18 arrow buttons . . . . . . . . . . . .17-19, 23 audio button . . . . . . . . . . . . . . . .18, 28 audio cd . . . . . . . . . . . . . . . . . . . .7, 17 audio cd fts . . . .
