Specifications

18 Playinga Disc
IAUDIOCDI
Playing a DVD or an Audio CD
Before you begin...
Turn on the power of the TV,amplifier andany other equipment
connected to the DVD Player.Make sure the "iV andthe stereo or
amplifier (if applicable) are set to the correct channel.Details are
on pages8-12.
I
Press the POWER button to turn on the DVD Player.
"HELLO" will appear briefly on the displaypanel.
2
Press the OPENICLOSE button to open the Disc tray.
3_
Press the DISC SELECT button or the DISC Number
buttons to move the disc tray (Disc I, Disc 2, etc.) to the
front position.
4
Place a Disc into the tray. Make sure the Disc is sitting proper-
ly in the correct recess.
Some DVDs are recorded on both sides.Make sure the side you
want to playis facing up. Or, if the DVD is recorded on only one
side,place the Disc in the tray with the label facing up.
• Repeatsteps 3 and 4 to load more discs.
5
Press the OPEN/CLOSE button or the _
PLAY button. The tray will rotate and close
automatically,and playback will begin at the first
Chapter or Track of the Disc placed in the left Leftside tray
side tray. _Y
Or, you may close the tray by gently pressingthe Disc tray toward
the DVD Player; DVD playbackwill start automatically.
If the DVD in the tray has a menu, the menu may appear on the
screen instead. Detailsare on page 19.
With some Audio CDs, playbackwill not begin unless you press the
PLAY button.
6
Press the STOP button to stop playback.
Remember, this DVD Player
will play only certain Discs.
See page six for details.
I
Helpful Hints
i i
A"No Feature"symbol _ may appear
at thebottom right of the TV screen.
This symbolmeanseither the feature
you tried is not availableon the Disc,or
the DVD Playercon not accessthe fea-
ture at this time.This does not indicate
o problem with the DVD Player.
If a Disc is dirty or hasscratches,the
pictures may appear distorted and
playback may stop. In such cases,
remove the Disc and turn o_'the DVD
Player.Disconnectthe power cord,then
reconnectit. Cleanthe Disc,then rum
on the DVD Playeragain and roinsert
the Disc for playback.
When the DVDor CD light appears on
the displaypanel,theDisc is loaded
coropletelyand is ready for playback.
Playbackwill end when the current disc
stopsplayback.
If the dischas not beenset on the tray,
the DVD Playerwill play the disc which
is set onthe right side tray.
When you want to select anotherdisc,
press the DISCSELECTbutton repeat-
edlyor the DISC Number button for
your desireddisc.
Becareful to keep your fingersclear of
the disctray.
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Philips Manuals