Specifications

12 Hookups(cont'd)
ot • o61oi,, iooooeetl to611 o_tQo • oeett • io_i i ooQoo • io661oloQI _ooll B,tQO • tOOOl IBtOQO0 • OOOII*I I llOtQ610°l_ltilltl _1._
Connecting to a TV and an Amplifier with Coaxial Digital Audio In jack_
a Mini-Disc Deck or a Digital Audio Tape Deck
• Use a coaxialdigitalaudiocableor an audioopticalcable(not supplied)for thisconnection.
• Ifyou usethe OPTICAL jack,remove the protective cap.
• If the Disc is recorded in 5.1 channel Dolby Digital Surround, you cannot dub the Disc in digital sound usinga
Mini-Disc or Digital AudioTape Deck.
• Set DOLBY DIGITAL and DTS to OFF on the DVD Player.Detailsare on pages38-39. If you playa DVD
when the settingsare wrong, the sound will be distorted or you may damagethe speakers.
DVD Player
Back of TV _'T_ _ 000
(example only) O 0
_ _L
l _ _ Back of Amplifier
(example only)
I
Connect a coaxial digital audio cable to the COAXIAL jack on the DVD Player and to the
COAXIAL DIGITALAUDIO IN jack on the Amplifier. (Or, you mayconnect an audioopticalcable
to the OPTICAL jack on the DVD Player and to the OPTICAL DIGITALAUDIO IN jack on theAmplifier.)
2
Connect the supplied yellow video cable to the yellowVIDEO OUT jack on the DVD Player and
to theVIDEO IN jack on theTV. (Or, youmay connectan optionalcomponent videocable to the COM-
PONENTVIDEO OUT jacks on the DVD Playerandto the COMPONENTVIDEO iN jackson the'l'V. Or, you
mayconnect an optional S-Videocable to the S-VIDEO OUT jack on the DVD Playerand to the S-VIDEO IN
jack on theT_)
3
Plug in the Amplifier's power cord.Turn on the Amplifier and select the Auxiliary IN station.
During Disc playback,you will adjustthe volume at the Amplifier. SeeyourAmplifier owner's manualfor
details.
4
Plug in theTV's power cord.Turn on theTV and set it to the
correctVideo In channel. During Audio CD playback,you may
check the status of the Disc on your'iV screen. During DVD play-
back,you will watch the programon the T_. SeeyourTV owner's
manualfor details.
5
Plug in the DVD Player's power cord. Press the POWER
button to turn on the DVD Player. "HELLO" will appear briefly
on the DVD Player'sdisplaypanel.Youshouldsee the DVD logoon
the "IV briefly.If you do not, checkyour connections and make sure
the'iV is on the correct channel.If there isno discin the DVD play-
er,"no DISC" will appearon the displaypanel.
Helpful Hints
Op_calcable(not supplied)maybe
damagedwhenbentat acuteangles.
Ensurecablesarecoiled
inloopswith a diameter ((i.li._Ira,_'_
of 6 inchesormore \\ i.<_')l
whenstoringthem.
Usea cablewhichis 9.8
feet or shorte_
Insertcableplugsfirmlyinto thejacks
whenmakingconnectJons.
If a plughas minorscratchesor is
dirty,cleanit witha soft clothbefore
insertingit into ajack.
Replacethe protectivecap onthe
OPTICALjack whenit is not in use.
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Philips Manuals