Specifications

Hookups(cont'd)II
• • • • ••,°•• ° •
Connecting to a Dolby Digital Decoder or DTS Decoder
Some Discsare recorded in a S.I channelDo_byDigital Surround or DigitalTheater System(DTS) Surround
format.These Discswill sound best if you connect the DVD Playerto a Dolby Digital or DTS Decoder.
• You will need a coaxialdigital audio cable or an audio optical cable (not supplied).Detailsareon page 12.
• If you usethe OPTICAL jack,remove the protective cap.
• If you connect the DVD Playerto a Dolby Digital Decoder, set DOLBY DIGITAL to ON. Detailsareon pages
38-39.
• If you connect the DVD Playerto a DTS Decoder, set DTS to ON. Detailsare onpages38-39.
If the DVD Playeris not connected to a Dolby Digital or DTS decoder,set DOLBY DIGITAL and DTS to
OFE Incorrect settings may causenoise distortion and damagethe speakers.
• Select the 5.1 channel Dolby Digital Surround sound in the Disc menu.
• Connect a subwoofer and the center,front, and surround speakerscothe Decoder as described inthe
Decoder owner'smanual.
Back of TV 2
(example only)
I
DVD Player
Do ©
I,,,,,,1©
_ Back ofDecoder
(example only)
Connect a coaxial digital audio cable to the COAXIAL jack on the DVD Player and to the
COAXIAL DIGITAL AUDIO IN jack on the Decoder. (Or, you mayconnect an audioopticalcableto
the OPTICAL jack on the DVD Playerandto the OPTICAL DIGITAL AUDIO IN jack on the Decoder.)
2
Connect the supplied yellow video cable to the yellowVIDEO OUT jack on the DVD Player and
to the VIDEO IN jack on the TV. (Or, youmay connect an optionalcomponent video cableto the COM-
PONENTVIDEO OUT jacks on the DVD Playerand to the COMPONENTVIDEO IN jacks on the'l-_.Or, you
may connect an optional S-Videocable to the S-VIDEO OUT jack on the DVD Playerand to the S-VIDEO IN
jack on the TV..)
3
Plug in the Decoder's power cord.Turn on the Decoder and select the Auxiliary IN station. During
Disc playback,youwill adjustthe volumeat the Decoder. Seeyour Decoder owner'smanualfor details.
4
Plug in theTV's power cord.Turn on theTV and set it to the correctVideo In channel. During
Audio CD playback,you may check the Disc status on your'IV screen. During DVD playback, you will watch
the program on the'l'V. See yourTV owner's manual for details.
5
Connect the DVD Player's power cord to a power outlet. Press the POWER button to turn on
the DVD Player. "HELLO" will appearbrieflyon the DVD Player'sdisplaypanel.Youshouldsee the DVD logo
on the"IV briefly.If you do not, check your connections andmake sure the TV ison the correct channel.If there
is no disc in the DVD player,"no DISC" wiII appearon the displaypanel.
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Philips Manuals