Specifications

Connecting_ to a TV and a Stereo
TV has Com__onent Video In Jacks
• Set DOLBY DIGITAL and DTS to OFF on the DVD Player.Detailsare onpages38-39. If you playa DVD
when the settingsare wrong,the soundwill be distorted or you may damagethe speakers.
Back O(T_/
(exar_ple on/y)
DVD Player
©
_y 2
°- i
._ Ir=-Y I_ @ AUDIO(LEFT)IN J
B_ckof S_reo
(e_mple only)
I
Connect the red and white audio cables to the red and white AUDIO OUT jacks (either I or 2)
on the DVD Player and to the red and white AUDIO IN jacks on the Stereo, matching the cable
colors to the jack colors.
2
Connect an optional component video cable to the COMPONENTVIDEO OUT jacks on the
DVD Player and to the COMPONENTVIDEO IN jacks on the'IV.
3
Plug in the Stereo's power cord.Turn on the Stereo and select the Stereo's Auxiliary IN station.
DuringDiscplayback,youwilladjustthe volumeat your Stereo.Seeyour Stereoowner'smanualfor details.
4
Plug in the TV's power cord.Turn on theTV and set it to the ComponentVideo In channel, which
usually is located near channel 00. DuringAudio CD playback,youmay checkthe statusofAudio CDs on
yourTV screen.DuringDVD playback,youwill watchthe programon the TV.SeeyourTV owner'smanualfor
details.
5
Connect the DVD Player's power cord to a power outlet.
Press the POWER button to turn on the DVD Player. "HELLO" will appear briefly on the DVD Player's
display panel.You should see the DVD logo on theTV screen briefly.If you do not_check your connections and
make sure the TV ison the correct channel, if there isno disc in the DVD player,"no DISC" will appear on the
displaypanel.
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Philips Manuals