Multi-Region DVD Codes Thank You for buying this E-Book from Fantastic Products 4u Please, don’t forget to leave a feedback ;o) If you can’t find your dvd player on this list, visit the bonus link where you can have updated information.. Bonus: http://www.videohelp.
Acoustic Solutions DVD321 Multi Region & Macrovision: Open the tray Press set up Press the next key Press the prev key Press the next key Press the prev key Ver 255 = region free Ver 1= region 1 Ver 2= region 2 Press left and right to change Press down key once Ver 3001=parental control enable Ver 3000=parental control disable Press left or right key to change Press down twice: Ver 4001= macrovision enable Ver 4000= macrovision disable Press left or right key to change Press down key three times Ver 5001= v
Acoustic Solutions DVD-521 Press the Setup button on the Remote Control Press Next Press Pause \ Setup Press Prev Press Next You should now be in a secret menu where you can change Region 1-6, or All for Region free.
Press the "SET UP" button Press "SCROLL RIGHT" button until "Preference Page" " Press 1 3 7 9 "Region Code Column" is displayed Press "SCROLL UP" or "SCROLL DOWN" button to choose desired region "0" is all code free. Press the "SET UP" button.
Press 1 3 7 9 A menu comes up showing the firmware version From this menu you can select the region with the numeric keypad 0=region free, 1-6 selects that region.
Code 4 Same as above, but put 342292 as the code. Aiwa XR-DV525 Unplug the XR-DV525 from the electrical outlet Press the DVD/CD button while plugging the unit ** Do not let go of the DVD/CD button ** While holding the DVD/CD button Hold the FastForward (>>)Button The Screen will go blank and the display will show FACTORY.
Power on player with no disc inserted and wait for "No Disc" message on screen Using the remote, press PAUSE Press the numbers 314159 in order. Player should now show "COdE - -" Press the number of the region you desire ( 0 = any region, 1 = US & Canada, etc.) Press PAUSE Power off the player for a few seconds Power back on and insert your DVD disc.
Open the tray Press 1 0 3 0 0 in the remote You shall see a 0 for a brief moment on the TV This means it is now region 0, i.e. region free Shutdown the DVD player. Akai ADV-8000 Turn the player on and ensure there is no disk in the player On the Remote Control key in 8, 9, 2, 6 plus the Region number For Region free 8, 9, 2, 6 followed by 0 Akai ADV-9000 Hold down play Power on and press and hold play Press 3,4,7 and then use fast forward to select region. Akai DHT-300 Eject DVD disc from the unit.
When the Akai logo appears, release the Fast Forward and Stop buttons but keep holding the black button on the underside of the player. A list of numbers will appear in columns. Press the Enter button once on your remote control, the second column of numbers should now be selected. Press the Cursor Right button on your remote control to select the second number. Change this to 00 for region free, 01 for Region 1 and 02 for Region 2.
Akai DV-P3570 Press "ON/OFF" Button Press "OPEN/CLOSE" Button Press "SETUP" on Remote Key in Password "49540" on Remote Go into "VERSION" at Setup Menu Change the Region Numbers 0 = All Regions Akai DVD-200BL Press the Open/Close button on your remote control Press the Setup button on your remote control Press the buttons 1, 3, 6 and 9, in order, one at a time, on your remote control Press the Left button on your remote control three times, in succession Press the Right button on your remote control You sh
Power on the player and open the tray Press 3,8,3 and 8 on the remote control A menu will then appear at the top of the screen Press enter until 9 is displayed Press 1 to claer the menu and it is region free Akai DVR-3100SS & DVR-3300SS Open disk slot Type 81328 Press Enter until desired region (9 for all) Press Stop to store (Above code also works on Dantax DVS-2500) Akai DV-P4000 Switch the power OFF, press the DIMMER SWITCH and BACK SKIP buttons at the same time.
Press the buttons 1, 3, 6 and 9, in order, one at a time, on your remote control Press the Left button on your remote control three times, in succession Press the Right button on your remote control You should now be in a setup menu. Select the Version option from the menu, then select the Region option. You can now change the region to 1 for region 1, 2 for region 2, and so on, or 0 for multi-region.
Akura ACHTS02 Press OPEN Press SETUP Press RIGHT 3x which will take you to the PREFERENCE page Press PLAY 2x and enter 49540 Select region by Up and Down key (0 is region free) Press PLAY to commit Press SETUP to exit Akura ADV143S Press Setup Press 1369 Press Left Left Left Press Right A new menu item called VERSION should appear Change the region code (0 = region free) Akura ADV14S In the no disc mode (i.
Enter desired region, or 0 for region free Press Pause on the remote control and then power off player Wait 10 seconds and then power on again. Some players may not respond to this method Alba DVD-108 Press 'pal/ntsc' Press menu Then press 0. Alba DVD109 Open tray Press 0 0 0 0 then select reg 0Verify by opening tray and pressing display. Alba DVD-103 - 113 Power on the DVD Player Press Pause on the Remote Control Enter the code 314159.
Press Next Press Prev Press Next Press Prev Ver should appear in the top right Change to 255 using left and right buttons Turn off and on All-tel DVD 101 Open the tray Using the remote control, key in the following: 1, 4, 5, 6, followed by the region number desired, or 0 for region free. But doesn't seem to work with firmware version ISZ9.48 Amitech AD702 & AD710 On the remote: INDSTIL PAUSE (try STOP if doesn't work) >>| (Next, eg. next track) |<< (Prev, eg.
Amstrad DVD 2320 Turn power on Press "eject" Press "display" Press "1", "1", "1", "1" Press "select" Press "0" (for region free), or "1", "2", "3", "4", "5", "6" (for the different regional codes) AMW M270 & M280 Make sure there is not a DVD in the drive Power on the device Press Setup on the remote control Hit the right arrow key three times to scroll to the "preferences" tab Hit "1379" on the remote control Use the up/down arrow keys to select the region code Press play AMW S99 Turn on the dvd Open the tr
(Above also works on - Yamakawa 215) AMW V99 Turn on the dvd Open the tray Enter 8561 Change the region code to 0 Exit to main menu Aspire DIGITAL AD-N820B Here's how to do it: 1. press the open/close button to open the tray; 2. press the setup button to go to the setup screen; 3. press the right-arrow button until you reach the preferences section of the setup screen; 4. press the 1 3 8 9 keys in that order; a region picker will appear; 5. press the up/down arrow keys to pick a region; 6.
Then press 349734 Then select 0 A blue box will appear in the top left hand corner that says "REGION FULL" Apex AD-1200 Open tray and press 8 4 2 1 (you will see -'s appear top left of screen) Menu appears for region and Macrovision. Use up/down keys to select Region/Macrovision. Use Enter to change region to 9/Macrovision on/off.
Go to the general tab and press 1 3 6 9 on the remote after each other A menu appears to select the region code Select with the arrow keys region 0 Press enter twice Press setup to go back Ascomtec DVD 3003 Open tray Setup 8888 in remote control Version menu appears Change the region.
Press pause again. Turn player off then on again Or switch on DVD player, press 'stop' on the remote, press '1','9','9','9' then 'enter' and the zone menu appears select 'all' to de-regionize the player.
Press 7, 7 and Enter on the Remote Control A secret menu appears where you can change the Region Code Audiovox D-1730 D1730 (Rev 3 Software) Following procedure is just for the unit which version number is "03" Please do following to change the zone of D1730 via remote control: 1. power on 2. Press "SETUP" button 3. Select and come into the the Preferences MENU 4. Input the password " 2 5 2 1 4 4 " 5. Press "Left" and "Down" button (now the screen will show "REGION CODE 1") 6.
Audiovox DV1700 Press these buttons on remotes: Shift Mark (then you can see region No.) Stop 000 87154 Shift 2 (for region 2) or Fast Forward (for multi region) Note: Before you apply the code, you must turn the ON SCREEN MENU on, so press the SETUP button to turn it on first.) Audiovox DV1710 disc open. use remote press set up. previous. next. previous. next. ff. set up. set up. previous. ff.
Open the tray Press "INTRO" button on the remote control Type "20110" on the remote control The words "SET OK" will appear on the screen Close the tray. Awa V520 Ensure the DVD Player tray is empty and closed On the Remote control: Press Setup On the players Front Panel: Press Next Press Stop Press Pause / Step Press Prev Press Next You should now see a new Menu.
Close tray Baze DVD5500 Open the tray Push SETUP Push 3 times at RIGHT Arrow button to enter the PREFERENCE SETUP MENU Enter 1, 3, 7, 9 and then the code 0-6 as you wish - 0 is region free Push SETUP or CLOSE to save the setting. BestBuy Easy Home DVD DV! [SETUP] - [STEP] - RETROCEDER [|<<] - AVANZAR [>>|] A secret menu appears Select 1 to 8 or Bypass (region free). BestBuy Easy Home DVD VX! [UP] [UP] [DOWN] [DOWN] [RIGHT] [LEFT] A secret menu appears Change the region code and the macrovision protection.
Press successively on the buttons Shuffle, Stop and Mute on the remote control To put on zone active : Power on your player Press successively on the buttons Stop and Shuffle Press on button 1 to pass in zone 1, on button 2 to pass in zone 2, etc Press on the Enter button of the remote control to validate your modifications Or To put it in multizone : 1. put on your Bose 3.2.1. 2. Press successively on buttons 9 and 4 of the remote control. 3.
Brainwave 602 Open Disc tray Press SETUP Move cursor to 'Preferences' and press PLAY Enter numbers 49540 A new window called 'Region-Code' should pop up Use the up and down arrows to select 0 for region free Press PLAY. (Above also works on - Elta 8892) Bush DVD-102 Press the Open / Close button on the Remote Control to open the drive tray. Press the buttons 2, 0, 0 and 1 on the Remote Control.
Press Open / Close Press Zoom Press A / B Press Up, Left, Down, Right The DVD player may show a Region Free message. Bush DVD-2009 Power on your player, then from the remote control key in the combination below: Press Open / Close Press Zoom Press A / B Press Up, Left, Down, Right The DVD player may show a Region Free message. Bush 1000 Open the player's tray Put in a Region 1 disc but do not close tray Press the 0,1,2 and 3 buttons on the remote control followed by the play button.
Open tray Press 33088 on remote followed by 0 for multi region Bottom left of screen will display region chosen. For vcd/svcd playback: Open tray Press 83119 on remote You will see HAVE VCD displayed in bottom left of screen Press enter on remote to load CD All vcd/svcds will now play Code remains active until power removed from unit. C CAT DV-921 Turn Power on Open Tray Hold "0" on your remote Close Tray Release the "0" Turn Power off.
Go to Menu Preferences Press 0815 -> a grey window appears showing Macrovision 1 Select "0" and press enter -> Macrovision is gone. OR Same as above, but replace 0815 with 8806 Choose region from 0 to 6. CAT DVA-2002 & HTC-2002 Press "open/close" Press "8" Press "4" Press "2" Press "1" Hidden menu appears 9 for region free Enter.
Enter one of the following codes (depends on version) 77 or 2918 or 74 or 6787 Then press ENTER to validate code A hidden menu appears Select NEXT PAGE (botton of the screen) Enter code 1 to disable Macrovision. Clairtone CLDVD101T For region free: Press: Open -> 8421 -> Enter -> [To toggle between 1,2,3,4,5,6,7,8 or ALL] Close For macrovision: Press: Open -> 4561 -> Enter -> [To toggle between Enable/Disable.
Press Setup on the Remote Control Press Next Press Stop Press Pause / Step Press Prev Press Next You should now be in a secret menu where you can change the Region from 1 to 6, or Bypass for region free Classic DVD103 Press the Open button on your remote control to open tray Press the Setup button on your remote control Press the Next button on your remote control Press the Previous button on your remote control Press the Next button on your remote control Press the Previous button on your remote control A
Clatronic DVD-491 Power On the DVD player Open DVD CD Player tray Press Setup on the Remote Control On the Remote key in 3, 3, 0, 8, x. Where x represents 0 for Region Free or 1-6 for a specific Region Press Setup Clatronic DVD 556 Note: Code only works for the software version M-XQ-M: Open the tray Press setup Press 2,1,8,8 New menu called "Version" will appear Select it and press enter Press right Select a new region (0 = region free).
Conia DVD-2002 Open the disc tray Push SETUP on the remote control Push 1, 3, 6, and 9, one at a time, on the remote control Push the left menu arrow button (on the up/down/left/right control) 3 times -- NOT the |<< or << button Push the right menu arrow button 1 time -- NOT the >>| or >> button If you see a new menu item named "VERSION", enter that menu. You should now see a screen with a Region Code option at the bottom Use the remote to change the region Push SETUP to exit the menu.
Press the Open button on the Remote to close the drive tray Press the Menu button, press the 1 button. press the Index (1-All) button Press the Open button, press the 1 button. Crown CDV661 Press Set-up Go to general set-up then press play. Go to TV display then press stop, |<< , >>| . CyberCOM CC 4931 Open the tray Press "Clear" then press 1,3,6,9 Select the Region code by pressing the corresponding 1-6 region code, or 0 for all Close tray and switch ON/OFF.
Press the SEL button on your Remote control CyberHome CH-DVD 300 Hack details: Power up, no disk in. Status says READ then INSERT DISC. Press MENU (status reads invalid key icon) Press 1 (status reads invalid key icon) Press 9 Menu is displayed. Press ENTER on the region, digit turns to "-" Press 0 Press ENTER again Press EJECT to clear the special menu. http://www.videohelp.com/dvdhacks.
CyberHome CH-DVD 302 Switch the player on and open the tray Press "Stop" Enter "1999" with the remote control Select "Region-Code" using the remote control Press the "Enter" button on your remote control Change the setting to "All" Confirm this with the "Enter" button Close tray with the remote control.
6. Press the number of the region required i.e. 0, 1, 2 etc. 7. Press Enter again 8. Close tray. The menu wil disappear. CyberHome CH-LDV 700B 1)Remove disk,Power on, disk lid closed 2)Press MENU,1,9 on remote (region menu should appear).
Now you can set the region code "0" for multi-region Now exit to the main page and your selection will be set. Daewoo DQD-2100D, 2112D, 6112D Turn on player Empty tray Then press 7 - 7 - Play (to enter the menu for the regional code entry) 9 for all regions Press setup to leave the menu.
Press the buttons 2, 0, 1 and then 0 on your Remote, or if this doesn't work, try pressing the buttons 3, 0, 1 and then 0 Press the Step button Press the Shuffle button Press the Next button Daewoo DS-2500N Turn DVD on and open the tray (do not put a disc in) Press SETUP on the remote control From the menu, choose PARENTAL CONTROL with the arrows on the remote Once its highlighted press OK On the PARENTAL CONTROL menu, choose DEFAULTS, and then highlight RESET (do not press OK at this point) While RESET is
Press Open\Close (tray open) Press Setup Press Play from the remote control Choose TV Type in the menu Press Stop on the players front panel (NOT from the remote control) Press |< (Prev) on the players front panel Press >| (Next) on the players front panel The region ID menu should come up Select the desired Region (with remote control) setting to Bypass for Region Free When you have selected the desired Region press Play Now press Setup on the remote control.
2. Push "Setup" on remote control. 3. Push "93010" ("9" is the region code for all regions. You can substitute your region for 9 if you prefer.) 4. Push "Step," "Shuffle," and then "Next" 5. Close the Disc Tray. to verify that the hack has worked: 1. Open Disc Tray 2. Push "Setup" on remote control. 3. Push "Shuffle," "Step, " and then "Next" This takes you to the secret setup menu. 4. Scroll down to the "debug" setting and verify that the region you selected is selected here.
Press 1,3,6,9,8,8,8 and 8 A new button called Version will now appear in the Setup window Press Down until you come to Version Press Play Press Up or Down to select the required region Choices are from 0 to 6 Press Setup. Daewoo DVD-S250 Press "Open" Press "8561" sequentially Choose the region you need. Daewoo DVD P480 Try this to remove the region code. First make sure there's no disk in the machine, press 9735 on the remote and region menu screen should appear. Select "0" to turn off the region.
'5' means Region 5 '6' means Region 6 '255' means All Region Enjoy! Daewoo DVG-6000D Put a region 1, 2, 3, or 4, etc disc into the player When it comes up with "wrong region" Press the "title PBC" button on the remote control and away you go.
Daewoo S2122 Power On Press Open Press Setup Press the numbers 33088 followed by the region number (0 = region free) In the main menu screen, a line will disappear and a little box with "R=number" will confirm the region change. Daewoo DQD-6100D Open tray Press (on the remote): 0520 Up Down Left Right Should now show Region free. Daewoo DV-135 Power on Open tray On the remote press 89260 = region 0, 89261 = region 1, 89262 = region 2 etc.
turn on player open tray on remote - press 0520 on remote - press up(^) down(v) left(<) right(>) (the keys around the setup button) Region free message appears in the top left corner To lock region again, repeat sequence. This is the same hack that works for others. Don't panic if it doesn't work the first time. Try again. Make sure you have not pressed the VCR/TV button on your remote--it won't work to program the DVD.
3. Display will show "disc loading" then "updating flash memory"; FL display will show "writing" 4. After 1minute loader will open. 5. Remove disc and power off. DO NOT CLOSE TRAY 6. Power on and close loader 7. Now press and hold Play (>), Forward skip (>>I) and Open/Close for more than 3 seconds until "INITIALIZED" appears on front display. Denver DVD-122 Press 'Open' on the remote control Press 33080 on the remote Press PLAY on the remote The DVD door will close.
Digitor DVD 2117 Ensure no disc is in the tray press 1 on remote press 6 press 7, then press 0, for All Zones, or press the number according to the disc region you wish to select. The DVD player should now play DVD's from all regions. Digitor DVD 3119 & 3122 Press 16719 Press OK when config menu pops up Choose 0 for all regions Press Exit Digitor G1602 & G1605 Press 16719 on remote control. Press OK when config menu pops up . Choose 0 , for All Regions, or the region number required. Press Exit.
DURABRAND DP305 DURABRAND PVS1960 DURABRAND VS1966 DURABRAND STS75E DURABRAND STS98 Open the tray Press 8, 1, 3, 2 and 8 The region menu will appear, then press enter until region 9 is selected and press Play The unit will now be multi region. VCD playback: To play VCDs, open the tray, press 0, 0, 0, 1, and press play.
Press TRACK BACK |<< Press TRACK FORWARD >>| Elta 8882 Power Off, Power “ON“ Press 2 x Arrow key “UP” Press 2x Arrow key ”DOWN” Press 1x Arrow key “RIGHT” Press 1x Arrow key “LEFT” Press Number 0 to select Country Code to 0 Press “Enter” Button Elta DVD-8890 Press Setup Press Step Press Skip Right Press Skip Left You can now change the Region Code Eltax DVD-650S Open the drive tray Key in using the Remote 8926# (Where # = Region number i.e. 1, 2, 4 etc.
-in the upper left corner -then this same white hand icon should disappear 4. press the '1' key on the remote handset -a small white hand should appear briefly -in the upper left corner -then this same white hand icon should disappear 5. press the '2' key on the remote handset -a small white hand should appear briefly -in the upper left corner -then this same white hand icon should disappear 6.
Press Slow. Press Previous Track. Press Next Track. A service menu will now appear enabling you to change the Region.
Press play Go to TV display Press stop, |<<, >>|. Finlux DVD-511 Open DVD tray Press 2812 (on the remote) Press Enter A system menu appears The Region Code can be changed. Fisher S1000 Press the Program button on the Remote Control Press the Right Cursor button Press the Right Cursor button Press the Enter button Press the Play button Using your remote control press: 1. Program, Right, Right, Enter, Play 2. The player should now be in multiregion mode. 3.
Eject the tray Key in on the Remote Control 2180 Enter the Region code 1-6 If you want all regions, press 9 To disable Macrovision: Open the players tray Key in from the Remote Control 4, 5, 6, 1 Turn Macrovision off by keying in 1, to turn it on again key in 0 Genica GPX-DV2000 Eject the tray Key in on the Remote Control 2180 Enter the Region code 1-6 If you want all regions, press 9 To disable Macrovision: Open the players tray Key in from the Remote Control 4, 5, 6, 1 Turn Macrovision off by keying in 1,
Goodmans GDVD 143FM Press the Open button on your remote control to open the drive tray Press the Setup button on your remote control Press the Next button on your remote control Press the Previous button on your remote control Press the Next button on your remote control Press the Previous button on your remote control A code should appear on the top left hand corner of the onscreen display Using the Left and Right direction buttons on your remote control, change the code to VER 1 for region 1 playback, VE
before you change it. You can also change the code to VER 5001 to disable VCD/SVCD playback, or VER 5000 to enable this feature. You may need to use the up and down buttons to select the VCD/SVCD playback option before you change it. Press the Setup button on your remote control. Goodmans DVD-3500PK Open the player drawer Press 9, 8, 1 and 7 on the remote You will now be in the hidden menu where you can change the Region from 1 to 6 by pressing Enter on the Remote.
Goodmans GDVD 134 Press Open/Close on your remote control Press 2 on your remote control Press 8 on your remote control Press 1 on your remote control Press 2 on your remote control Press Enter on your remote control Using the Down button on your remote control, select the Country Code option Press Enter on your remote control You will now be presented with four dashes Press 1 on your remote control for region 1 Press 2 for region 2, and so on.
You will need Winzip or Easyzip as the file you have downloaded is in a compressed state or 'Zipped up'. Open the file lg5000.zip then extract or uncompress the file kpjc19_1.dvd to you hard drive in say your 'Mydocuments' folder. (Here is the confusing bit) it will create a directory in your Mydocuments folder called RMTM0000, this you accept and go with the flow.
Press pause Enter Pi until FF appears (314159) Enter region desired (0 for region-free) Press pause. Code 2 Go to DVD mode Press Setup/Menu on the remote Go to TV Aspect and pick 16:9 Wide Hit the corners: type 1397139 Hit Enter. Go-Video DVP1165 Turn on the DVD player. Do NOT put a DVD in the drive. Press the PLAY button on the remote control 8 times. Press 01060 (last number 0 for region free). Number 9 will appear on the screen - press number 9 on the remote control until it disappears from the screen.
Without disc Press "0" "0" and then "exit" This will set it to all regions. Code 3 In stand-by mode From remote control, press 0 0 1 for R1, 0 0 2 for R2, 0 0 3 for R3, and so on, which you desire. Gradiente D-12 Code 1 Turn the player on and ensure there is no disk in the tray Key in the following code from the Remote Control 31415900 Then press "EXIT" You should receive a message in English stating the machine is now Region Free.
Repeat steps one to 5, changing the code at step 4.
Press the Open button on the Remote Control Then press Setup Press the 9 button on the Remote Region Free, or 1 for Region 1, 2 for Region 2, and so on Press the buttons 2, 0, 0 and then 0 on the Remote Then press Step, Shuffle, and the Next button Grundig GDV-200 Open the DVD Player CD Tray Place a Region 1 disc in the tray, but don't close it Press the buttons 0, 1, 2 and then 3 on the Remote Control in order, one at a time Press the Play button on either the Remote or the player To change the player back
Place a Region 2 disc in the tray, but don't close it Press the buttons Return and then Play on the Remote Control in order, one at a time Grundig GDV-220 Converting this player to multi-region: Switch the player on Press and hold the following buttons for 3 seconds, STOP, OPEN and SKIP When the hidden menu appears select region free or a specific region Exit the menu Grundig GDV-520 Press Menu Now key in 1, 6, 7 Press 1 for Region 1, 2 for Region 2 and so on For Multi-Region mode press Mute Grundig GDV-62
With the disc out and on press, SETUP, STOP, |<<, >>| H Harmon DVD-1 Put the player into Standby mode, with no disc in the tray. On the Remote Control press: 3 1 4 1 5 9 2. Then press the zone you want: 1-4. Power the player ON. You should now be able to play any region Harmon DVD-10 Turn the player on Wait until 'No disc' is displayed Press the buttons 3, 1, 4, 1, 5, 9 and 2 on the Remote Control The press 1 for Region 1, 2 for Region 2, 3 for Region 3, or 4 for Region 4 etc.
Turn the player on. Open the tray and play the disc of your choice Note: The Region code is stored when the player is turned off, so therefore you will need to change the region for each region DVD you wish to play Haus H-2001-S (Press "STOP" twice. Press "SETUP". Press "VOL+ & VOL-" repeat the sequence twice in quick secession (+,-,+,-). the TV screen will display "VER #" Press left/right cursor keys to change the # (1,2,3,4,5,6 for desired Zone Code) For All Code -Press 255. Press "SETUP" .
Press the 9 button on the Remote Control for Region free, or 1 for Region 1, 2 for Region 2 etc. Press the Open button on your player; Press the Standby button on the Remote Control Hitachi DV-P305E Power on your player whilst pressing both the Play and Stop buttons on the front player After a short while you should be presented with a set of language options.
Hitachi DV-P505 Press the Setup button on the Remote Press the Last button Press the Skip Previous button Press the Skip Next button You will now enter a menu where you can alter the player region Hitachi DV-P415U and Hitachi DV-P415 Open the DVD drive While Open Press and hold Enter. Enter 1 for region 1 and so on insert your region (1-6) DVD.
Press and hold the Angle button on the Remote for approximately five seconds to select the Region Hiteker AD-600A Press the Set-up button on your remote control. Using the onscreen menu, select the Preferences option. Press the Still/Step button on your remote control. Press the Prev button on your remote control. Press the Next button on your remote control. You will now enter the hidden set-up page, and can change the player to any Region or set it to Region Free.
Press Skip right Then you can select the region code with the cursor Hyundai HU-2010 Open the discs tray. Click on SETUP in your remote control. Got the sub-menu "Custom Setup" by pressing the right arrow on your remote 3 times. Click four times on the number 3 on your remote control. You should be taken into a new menu "Secret1 Menu" where you can choose any region code you like, or 0 for Multizone. Click on SETUP in your remote control to leave the menu.
I Initial IDM 1731 Hi all you guys who need region unlock codes for a Initial portable DVD players.. Here they come. Turn on the player. (No DVD in the player) Push SET UP. (On remote) Scroll down to "Preferenses menu" Push the play key (Centre arrow) no unlock menu, just do the following. Enter one of the key codes from the list (your unit) with the remote. Press left arrow, then down arrow.
IDM 1810A 212425 251131 IDM 9530 245512 222443 IDM DVD 5820 245545 233112 Note; 04' model of Initial 1731 has the bottom attaching battery.
Press Mute J JNL 7001 Open the tray Input the numerical sequence 2180 followed by the Region number of the software you wish to play (use 9 for Region Free) Close the tray JNL 7003 Open the Tray Key in on the Remote Control 8, 4, 2, 1 The Region Menu should be displayed Use the scroll buttons to select the required Region Close the tray to select and complete JNL Digivision 7002 Open the tray Input the numerical sequence 2180 followed by the Region number of the software you wish to play (use 9 for Region F
By pressing the Right and Left cursors buttons, change the last four digits until they read "0000" for Region Free, "0101" for Region 1, "0202" for Region 2, "0404" for Region 4, "0808" for Region 8, and finally "2020" for Region 20.
"0404" for Region 4, "0808" for Region 8, and finally "2020" for Region 20 ***See Note at bottom. If you are having problems with Region 4 disks change the above setting to "0458" and make sure PAL or NTSC is correctly set on your machine. Press Enter to confirm the Region change. Press Standby on the machine to turn it off. Wait 5 seconds. Press Standby on the machine to turn it on.
Before loading a disc, press and hold the play button on the unit itself (NOT remote control) for about five seconds. The display panel will then show what region you are (e.g. in Australia it will say Oceania). By using the remote up and down keys, you can then scroll through the regions until you find the region you require. Select it by hitting the enter button. The display will then say "Initial OK!". You are ready to put a disc in.
Press Setup Kiss DP-330 On Remote Press: Eject, Clear, 276, Enter. Kiss 715 Switch it on Press Setup Press Slow Press Skip left Press Skip right Use the Right Arrow button to select the desired region: A = Region 1, B = Region 2, C = Region 3, D = Region 4 E = Region 5, F = Region 6, *** Region Free . Press Setup KLH DVD-33 Turn on the DVD Player. Use the FCN key to put it in DVD mode. Open the disc tray and wait for the display to say "\OPEN\". On the remote, press 9817.
To play DVDs other than region 1 encoded ones: 1. Press the "menu" key 2. Press the numbers 1,6,7,1,9 3. A menu should appear on the upper-right corner of the tv screen asking which region you wish to play, 0 for region free, 2 for UK... 4. Press the number of the desired region, wait a second or two and you should be able to load and view the DVD http://www.videohelp.com/dvdhacks.php?dvdplayer=KOSS+KD365&hits=50&Search=Search Koss KS3112-2 (No disc in tray) press 16719 You see "hidden menu".
Turn it on and it's region free or in the region you selected Labway X-Wave 900 Turn the player on without a disc in the tray Press Setup Press Step Press Fast Forward Press Fast Backward You are now in the 'miscellaneous menu' Press Pause Press Stop Press + or - to go to the required region or go to 00 to make the player region free Exit the menu Turn off the player Turn it on and it's region free or in the region you selected Landel DV-268 Power on Open the disc tray Push "Menu" button Enter 20110 The wor
Lasonic DVD-3200 Press Eject leave tray open. Press 1, 1, 1 and 1 followed by the region number you want. Close tray and play the movie. Lasonic DVD-8050 Press Eject leave tray open. Press 1, 1, 1 and 1 followed by the region number you want. Close tray and play the movie.
If you see 00 in the top right corner of your screen it means it is region free If you now select 01, 02, 03, 04, 05 or 06 it will select a region manually LG DV-4941P Press off/on Press Pause Key in 314159 the line "code dod =" will appear Press 0 (zero) Press Pause Turn the player off.
Email me for instructions: fun_da_mentalist@hotmail.
Then press "6" Then press "7" Then press "Mute" Note: it MAY not be necessary to press "Menu" at step 2. So if it doesn't work pressing this try the hack skipping step 2. Limit DVD-8080a & 8072 Turn on the player and press the Open/Close button Enter '8 4 2 1' on Remote Control.
Before Hack: xxxxxx-xxxx-xxxx (1xx-xxxx) After Hack (say you selected region code 0) xxxxxx-xxxx-xxxx (0xx-xxxx) I don't have any DVDs other than Region 1 or 0 on hand, but I tested the player with Region 1 Charlie's Angels which I know has Region Code Enhancement. After changing the player to Region 2 I put in the DVD and, sure enough, the disc would not play. On the TV screen the DVD only displayed the warning and map regarding Region Coding.
Logix DVD-3300D Door open. Setup Menu Custom (last option on setup menu) 3333 (4 numbers). Code choice Enter. Press 0 for all. Setup OR Power on the Logix-3300D DVD Player. Press the OPEN/CLOSE button on the remote once Press the SETUP Button. Press the blue right arrow button 4 times to CUSTOM SETUP menu. Press 3 Button 4 times. Press the blue right arrow button once Move up and down to select your desired region code. CODE 0 represents Auto-Region. Press ENTER button when you have selected.
Magnavox MDV450 Turn on your DVD player, press MENU button on your remote control then go to DEFAULT and select RESET. Or turn on, press open, and push 1111 on remote slowly, then 0 and push close. Malaga SE-1210 Press the Open button on the Remote Then press Setup Press the 9 button on the Remote Region Free, or 1 for Region 1, 2 for Region 2.
(Same as above - 3100). Marantz DV-4000 Turn on the player with no disc in the tray Press Dimmer (on front panel) Press Previous (on front panel) The display should show 4 dashes Press 1, 9, 9 and 9 Enter 01 for Region 1, 02 for Region 2, 04 for Region 3, 08 for Region 4, 10 for Region 5, 20 for Region 6 or 00 for Region free Press Enter.
Press Open/Close on the Remote, the tray should not open though Press 5 on the Remote Press Mute on the Remote, this should bring up the Region Selection page Press OK then Exit The word ALL should appear and you will be able to play discs from any Region Matsui DVD-120 Perform ALL functions on the players front panel, NOT from the Remote Control Turn the machine on Press STOP, SKIP and OPEN at the same time and hold for a few seconds A Menu will appear.
For 2022 use same as code as MVD-2020 1. Open/close 2. Clear 3. Type 1 3 6 9 4. Enter 0 for All region, 1 for Region 1, ... 5. Restart the player (Standby and On). Works fine Memorex MVD-2027 "SETUP", Press "1" for region 1 or press "2" for region 2 Press "7" for all regions, "PAUSE/STEP", " >>I ", " I<< ", "SETUP". Or Setup-key, 0-key (means zero / null), pause-key, I<< (means left), >>I (means right), set-up.
6) Press PLAY to save the change 7) Press SETUP to exit the setup menu Minowa DVD-101 Open the players draw Press 1, 4, 5, 6, on the Remote Control, followed by the desired Region code 1 = Code 1 2 = Code 2 0 = Region Free Mishine DVD-2004K To access this players hidden factory settings menu follow these steps: Press Setup Press Stop Press Previous Press Next You can now set factory settings as you like including region code Mitsui 650 Open the drive tray Key in using the Remote 8926# (where # = Region numb
Switch it on Press Setup, Slow Press Skip left, Press Skip right Use the Right Arrow button to select the desired region: A Region 1, B Region 2, C Region 3, D Region 4 E Region 5, F Region 6, *** Region Free. Press Setup Mustek DVD-V300 Ensure the players tray is empty and closed On the Remote control: Press SETUP On the players Front Panel: Press NEXT Press STOP Press PAUSE/STEP Press PREV Press NEXT You should now see a new MENU.
You should now see a new MENU. Go to Select Region and make your choice: Mustek DVD-V562 & V56S Same as above Mustek DVD-V600 RZ With the players DVD draw is open push on the remote press the following numbers: '8,4,2,1', This should bring up a special menu. Press ENTER to toggle through the region codes and select '9' to enable region bypass.
the Dimmer & Reverse Skip buttons any longer), then using the handset's numerical keys press 1, 9, 9, 9 The display should now show: A-00 D-02, D-02 indicates Region 2 To change the region code, punch in the new code (i.e. 01 for Region 1, 03 for Region 3, etc.) and after that press the ENTER button (located next to the numbers keypad on the Handset). The display should now change (slowly) to D-01 (or whichever new region you have assigned to, as in (i.e.
1) Power on, with no disk 2) press setup 3) enter the following sequence: 1,3,6,9,<-,<-,<-,-> (<- left arrow, -> right arrow) 4) You will get a new menu "version" 5) Select "version" and then change the value to "0" for multi-region. 6) press "setup" to save your choice.
Omni SL-2000KD Power ON the DVD player Press the OPEN/CLOSE button on the Remote OR front panel - the tray will open With the tray still open, enter "2168" on the Remote, followed by the region code.
Converting this player to multi-region: Power on your machine Press the Stop, Open/Close and Skip buttons on your player simultaneously and hold down for 3 seconds. A hidden menu should appear.
press eject hidden menue appears enable playback VCD Hack for proved on firmware 2.0 1. Power cycle the unit 2. Press Open Tray 3. Insert Audio CD 4. Wait until the "Music CD" disappears 5. Press "Menu" 6. Press "9" 7. Press "1-All" 8. Press Open Tray 9. When prompted for VCD Enable Select "1" 10.
Press 'Menu'. Press '9' Press 'Open/Close'. Press '5' 'Region 1 - 6' should be displayed on screen Enter Region code. Press 'Mute Oriton DVD 3119 http://www.videohelp.com/dvdhacks.php?dvdplayer=ORITRON+DVD+3119&hits=50&Search=Sear ch remove dvd from drawer wait for screen to confirm that player is empty slowly press buttons 16719 a hidden menu will come up press OK button press the number 0 button Press exit If you like repeat process to confirm that 0 (all region) is still set.
Insert any disc, select the PBC button on the remote control, then followed by selecting the play button. The PBC function is for high-level menus and RCE coding. Panasonic SC-DK2 Turn on player with no disc inserted While pressing "Shift" on the remote press "Setup" Press "Enter" twice Move the cursor to "Other" and enter the appropriate four-digit region setting, beginning with 000. Press "Enter" Press "Return" twice Switch unit off for at least 3 seconds. Load DVD and play.
Philco DV-P2000 Ensure there is no disc in the tray and that the tray is closed Press STOP Press STOP Press SETUP Then key in the following 3, 8, 8, 8, 3 Followed by the Region you wish your player to play Philco DV-P2100 Open tray, Press 8926 ("*" will be seen on the screen). Then select area (1 to 6) or "0" for all. Press PLAY (tray will close). Philco DV-P2500 Open the player's tray, Press 8 8 8 8 (four "*" will be shown on the screen). Select the region (1 to 6) or "0" for region free.
Press Play Put a DVD in the tray Press Play You may be able to select a specific Region by keying in the Region you desire, i.e. 1 for Region 1, 2 for Region 2 and so on, instead of using code 13. Philco PH-9200 Turn on player, Press Eject on remote control then Press 8421 or 1248 with region CODE: 9 for multiregion. Press select and Put a DVD in the tray, Press play. Philips DVD-170 Pro Press the buttons Play, 2, 7 and 4 on the Remote Control. The onscreen display should look like this: '____ ____' .
Philips DVD-625 Turn on the player Open the tray. Press 9 9 9 9 on the remote, you can do it slowly. Press what region you want, 0 (zero) is for region free. Philips DVD-700 To convert this player to play a Region 1 disc: Press Play, 2, 7 and 4 on the Remote Control. The onscreen display should then look like this: '____ ____'. Enter the following code using the Remote Controls number pad 005000 128 256. Press the Play button on the Remote Control.
Via the "System" button on your Philips remote, on your recorder (no disk in recorder), change the "Remote control used" from "DVD Recorder" to "DVD Player". Store it. (This is IMPORTANT!) On your Philips remote press Play 159 The display on the recorder should now change to eleven dashes Still using your PHILIPS remote, tap in 121 212 005 255 (the last few digits will NOT be visible on screen but they WILL be there).
Display will return to "NO DISC", and the recorder is now region free. Power down your recorder, wait a few seconds Via the "System" button on your Philips remote, on your recorder (no disk in recorder), change the "Remote control used" from "DVD Player" to "DVD Recorder". Store it.
121 212 005 003 and press play (for RC3) 121 212 005 004 and press play (for RC4) 121 212 005 005 and press play (for RC5) (Note: You can only change 25 times the code!) to make it RC free you must send a RC6 command: RC6 4 235 at this point - - - - - digits will appear on the DVD player, type in: 121 212 005 255 now it's RC free Philips DVD-711 Code 1 Send the infra-red code RC6 (aka Codeset 4, Key 235) to your player.
Philips DVD-718 Send the infra-red code RC6 (aka Codeset 4, Key 235) to your player. You can do this with a OneForAll remote such as the OneForAll 6 (or URC7560) or OneForAll 4 Digital with the following instructions: Configure the Remote using the setup code 0539, Press the Magic button, Enter the code 085. Press the OmniRemote key marked as 955 Multizone. The onscreen display should show 11 spaces like this: '-----------'.
I disasembled my unit,and I figured out that DVD953 is the LG's OEM. You can turn it as multiregion player without hardware modification!! 1.Power on the unit with no disc. 2.Press "PAUSE" on the remote. 3.Enter "3 1 4 1 5 9" on the remote ("CODE 1" will be shown. "1" is the current region code). 4.Press "0" on the remote (0=AUTO, 1,2,...=set region) 5.Press "PAUSE" on the remote. 6.Power the player off, and then back on. Or http://www.videohelp.com/dvdhacks.
4. 5. 6. 7. 8. Click on "One for All 6 "....at bottom of page Click on "Internet Download" You need to Register to gain access, takes 30 secs, password arrives in mail Click "Next" at bottom of page Select from "Laser Disk Players" --> "Phillips -1" (This is what contains the Phillips DVD codes) 9. Click "Submit" at bottom of page 10. Follow instruction on screen on how to program your remote 11. Click "Next" 12. This page tells you how to "test" which code will work 13. My Phillips 710 was the "7" key 14.
If 0 for Region free fails, try 9 Phonotrend Prestige S2200 Power on the unit and open the DVD door by pressing the "Open" button on the front panel Use Remote Control to enter the following numbers 3, 3, 0, 8, 8 You will see in the top left of the screen "****" appear Key in a number corresponding to the Region you desire your player to be set to, i.e.
Pioneer DV-444, Pioneer DV-530, Pioneer DV-535, Pioneer DV-606, Pioneer DV-626, Pioneer DV-717, Pioneer DV-C302D, Pioneer DV-K101, Pioneer DVL-909, Pioneer XV-HTD510 (Same as above – 343) Pioneer DV-37 Turn on your DVD player without a disc Press "setup". Press "right Arrow" until "general" is selected Press "down arow" once. Press "display" Press "condition Memory" Press "1", "2", "3", "4", "5" or "6" for the Regio Press "setup".
Remove the disk from the tray and close the tray Enter 77 on the remote control followed by 0 for code free operation, 1 for US DVDs, 2 for european DVDs or any other valid region code you like The player now plays back DVDs with the selected region code. Polaroid PDV-0700 When playing a DVD, press stop on the DVD Player to ensure that the disc is not spinning. (You may even want to remove the disc from the playing unit.
In the "Macrovision" (this is page 2 of the menu) insert 0 Press SELECT Press RETURN Proline DVD-1040 If you have a disc in the tray, take it out first and THEN turn the power off on the unit; Turn the power on with the remote control; Open the tray with the remote control and leave open for the duration of this procedure; Push the SETUP button on your remote control; Arrow down on the remote control to the "Exit Setup" option - BUT DON'T CHOOSE IT!; Now press, 1, 3, 6, 9 on your remote control (TIP - Get p
Press Pause\Setup Press Prev Press Next You should now be in a secret menu where you can change Region 1-6, or All for Region free Proson DVD 2002 Power ON the DVD player and eject the tray. Press the numbers 33088 one by one. Right after the code has been entered press "0" for all regions, 1,2,3,4… will choose different regions Q Quadro 700 Same as the Skyworth DVD-650S - Open cd drawer, Key in (using remote) 8926# (# = region code number i.e. 1,4 etc.
Raite 713 Press Setup, Press Slow, Press Skip left, Press Skip right Use the Right Arrow button to select the desired region: Letter Region A Region 1, B Region 2, C Region 3, D Region 4 E Region 5, F Region 6, *** Region Free Press Setup Raite 715 Press Setup, Press Slow, Press Skip left, Press Skip right Use the Right Arrow button to select the desired region: Letter Region A Region 1, B Region 2, C Region 3, D Region 4 E Region 5, F Region 6, *** Region Free Press Setup Rankarena DVD-2400 To enter Loopho
Use 9 for all regions. Format HDD Turn on the player and wait for MENU Screen Then hold buttons INPUT and STOP After 3-4 seconds you will see FORMAT on the front display Your standard IDE HDD is formated, clean and ready for recording RCA RC5215P To change it to region 1 Turn on the dvd without disc. with the remote control press the following number sequence. 7385652500010001 and then press the info key from the remote control. 7385658500020002 & info = region 2 7385658500030003 & info = region 3...
Open the players draw and ensure there is no disc in it Key in "7" on the Remote Control Then again key in "7" The press "Enter" This should bring up the players hidden menu 13 is Region free, otherwise set the player to a specific Region, 1-6 respectively Roadstar DVD-2025H Open the DVD door by press "Open/Close" and Type in the code 330880. You will see on the screen "R0" then Close the DVD door by press "Open/Close. Roadstar DVD-2027H Open the drive tray.
Rowa DVD-800 Open tray press 8421 or 2168 then press enter to set region, region 9 is all regions. To disable Macrovision region of disc must be set prior to entering 4561 enter, but you cannot use region 9 setting to use this crack. Apparently 9999 also kills the macro. To exit the region set menu just press open/close. S Saivod DVCI-15G Open disk tray and Dial in your remote the code 8421.
You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free.
Samsung SV-DVD 440 All operations are achieved from the remote control. 1. Power on the system with an empty tray, it will display "No Disc". 2. Press the SUBTITLE key and then press 57538. It will display the current region setting. 3. Select the desired region setting (9=region free, 1=region 1, 2=region 2, ...). 4. Confirm the choice by pressing the SUBTITLE key. 5. Power down the system.
Samsung DVD-711 Power on your player whilst pressing hold both the Play and Stop buttons on the front player After a short while you should be presented with a set of language options. Release the Play and Stop buttons on the player You will now need to select a language option between 1 and 6 Samsung DVD-807 Press the DVD button on your remote control, Press the Open/Close button on your remote control. Place a Region 1 disc in the tray. Press the Open/Close button on your remote control.
After a short while you should be presented with a set of language options. Release the Play and Stop buttons on the player You will now need to select a language option between 1 and 6 Samsung DVD-HD841 1. Turn on player with no disc in the tray. "No disk" appears on screen. 2. Press the "Repeat" key on the remote. 3. Press "57538" on the remote. A number should appear on screen, indicating your player's current region (e.g. "2"). 4. Press the number for your required region (e.g.
Samsung DVD-P140 Samsung DVD-P142 Samsung DVD-P144 1. Ensure disc tray is empty. 2. Press "Repeat" (this is on the bottom right of the remote control and shouldn't be confused with Repeat A/B which is on the left) on the R/C then enter 5,7,5,3,8 3. The number "2" (current region code) should appear in the top left of the screen. 4. Quickly press the number "9" button on the R/C, for "multi region". 6. Wait 20 seconds, then power off, then on again.
4. Select your language. 5. Press REPEAT then the following codes for the required region the player is already set to (region you bought the player in) do not confuse this with the A-B button: Region 1 - 2, 9, 3, 3, 4 Region 2 - 3, 8, 7, 6, 7 ("E series M105", M205 and M305 users try: 57538) Region 3 - 5, 6, 7, 3, 2 Region 4 - 7, 6, 8, 8, 4 Region 5 - 5, 3, 8, 1, 4 Region 6 - 2, 4, 4, 6, 2 6. A code will appear, indicating the region setting of your player. 7.
1. Power ON 2. Press MENU 3. Enter code 57538 4. The current region code 5. For codefree press 9 6. Open DVD door 7.
Press "Enter" on the Remote UNTIL "9" is displayed Press "Play" The player is now region free Scan SC-2000 Press the Setup button on your remote control Press the Title button Press the Step button Press the Next button Using the Up and Down buttons on the remote, select the region of your choice or Bypass for region free. Save and then Exit the menu Scan SC-2500 Open Tray. Enter:0106 on the Remote Control then Enter:Region Number on the Remote Control. (1=Region 1,2=Region 2,0=Multi-region none RCE etc ).
Press the Mute button Schneider DVD-810 Press the Menu button on the Remote Control Press the 9 button on your Remote Press the Open/Close button on the Remote Control, note the draw will not open Press the 5 button You will now enter the region selection page, and can change the player to any Region Schneider DVD-855 Open CD drawer Press Setup on the Remote Choose the right item in the menu. This is the one that has settings "VFD, Password etc.
SEG DVD-2000 Setup / Slow / Skip Left / Skip Right This allows you to change the Region Code of the machine, "*" is Region Free. SEG Beverly Hills, SEG DVD 2211, SEG Las Vegas, SEG Los Angeles Press "Menu" "7" "4" "2" "0" after this you'll see the player hardware and software set-up in this Menu you have to press "9" "0" after this your player is region free.
Close the draw, You should get a message appear on the TV screen To complete the process, press OPEN/CLOSE Shinco DVD-180 Press the Open button on your remote control to open the tray. Press the 7 button on your remote control. Press the Enter button on your remote control. Press the 7 button again on your remote control. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free by entering 13 as the country code.
Singer SGD-001 Ensure the players try is closed and has no disc in it From the Remote Control Press 7 Press 7 Press Select or Enter Singer SGD-006P Open Drawer Press 8, 4, 2, 1 to bring up the hidden Region menu Press the Select button until Region 9 is selected (Region 9 being Region free) Close Drawer Skyworth DVD-650 To change region code, or make the machine multi-region follow these steps: Open the drive tray Key in using the Remote 8926# (where # = Region number i.e. 1, 2, 4 etc.
Press "Next" SM Supervision 1100 Ensure the players tray is empty and closed On the Remote control: Press SETUP On the players Front Panel: Press NEXT Press STOP Press PAUSE/STEP Press PREV Press NEXT You should now see a new MENU.
Enable user operation prohibitions* and access restrictions : [NEXT] [RETURN] Default Disable user operation prohibitions* and access restrictions. Sony DVP-S330 Multi-Region: Turn On the unit with the remote controller Wait until "no disc" appears in the unit's display Press Pause, 3, 1, 4, 1, 5, 9 The word "CODE" should appear in the display Within five seconds, press the key that corresponds to the zone you want i.e.
Put Machine on Standby then type in 1,2,3, Menu, Title & Enter You can now watch dvd's from any region Sony DVD-CX850D The Ultimate DVD Upgrade CX850D Sony DVP-CX850D DVD MOD Kit Manual Macrovision disable All DVD players have a system called Macrovision built in to the player, which is designed to stop the copying of DVD discs to video. However, this system can have adverse affects on some projectors. For this reason the DVD MOD Upgrade disables Macrovision to solve any problems.
Put the unit in STANDBY mode and press the following buttons on the remote control Press the TITLE button Press the CLEAR button Press the POWER button Sony DVP-M35 Insert your disc then press DVD menu button, should take you to menu screen for the film, Then select program button on your remote then selected a few chapters from 2 - 20 say then press play,stop,play,stop until it plays the movie(sometimes works straight off others minutes, it may start playing at chapter 15 but once you have it playing just
Hold clear, menu and number 4 then a menu will pop up asking you to type the region codes. Sunny DVD-650 To make this player Region free follow these steps: Open the tray Enter 8, 9, 2, 6 then press the Region number that you want (9 for multi region ) Insert your DVD in drive and close the tray Your player is multi region. Sony Playstation 2 The Japanese Playstation 2 is only meant to play Region 2 NTSC movies on DVD. However, there are several tricks you can use to enable playback of Region 1 NTSC movies.
6: Wait for the DVD menu 7: Release the keys 8: Start the movie with the play icon or the movie start icon Sungale DVD2002 Power on. Open disc tray. Enter "2812" with remote. Push "Select" on remote until the region code number changes to "9". Close tray. Power off. Or 1) With remote control, power the DVD player on. 2) With remote control, open the DVD tray. 3) With remote control, select SETUP.
Tatung TDV5100 Open the tray then, Press set-up, stop, rew skip, FF skip. Teac DV-1000 Turn on player Press open Key in 2,1,6,8 with the remote Current region should be displayed Press Enter Key to change region Teac DV-2150 Open the tray Press "2168" on the remote Press the ENTER button until it reads "Region 9" form multi-zone. Power OFF. http://www.videohelp.com/dvdhacks.
Turn player on without a disc in the tray Open the tray. Enter 2168 using remote control Enter region code 9 (region free). Teac DV-3500 Open tray Press Setup Type in numbers 93010 Press Step Press Shuffle Press Next Close tray Power off Power on.
Technica DVD-222 & 251 Start without a DVD in Push "SETUP" on the remote Push "STOP" Push "STEP BACK" Push "STEP FWD" You now enter a new menu, "REGION ID" Select "BYPASS" Push "PLAY" to save. Technica DVD-351 Press Setup on the front panel Press Stop on the front panel Press Prev on the front panel Press Next on the front panel A new option "Version" under setup should appear Choose Region 1-6 or 0 to bypass.
A secret Menu1 appears Select yor region of "Free" for multi region playback. Technika DP-301 Press power on dvd Press setup Press “right”button three times until you get to the set tv standard page Press “up” button once, (version should be highlighted) Press 49540 (this will bring up the region code) Press up or down to select the desired region (0 is region free) Press setup Press power off, then back on again.
Technika SVD-1165 Press Setup on the remote control Press Stop on the front panel of the player Press Previous on the front panel of the player Press Next on the front panel of the player You should now be in a secret menu where you can change the Region from 1 to 6 Or Bypass for region free. Terapin TT-2600 1. Be sure NO DISC is in UNIT 2. Press set up 3. Use right arrow to move to "Preferences" icon on top. 4. PRESS 1 6 0 7 on keypad 5. A new screen is displayed with different set of numbers. 6.
Press "PREVIOUS CHAPTER" Press "NEXT CHAPTER" Press "MENU" Turn the player off and on again.
Using the remote enter the following code: 1, 6, 7, 1, 9 Choose region (0 for all regions) Turn the player off. Thomson DTH-210 Turn on DVD player with no disc in tray With the remote control press the "angle" button With the remote control press "167" and wait 3 seconds With the remote control press the "0" button Turn off the DVD player and wait 5 seconds. Turn on DVD player after the 5 seconds. Thomson DTH-220 Power on your player (without disc). Wait for the menu.
You will now need to select a language option between 1 and 6 Thomson DTH-4200 Always perform a Cold Start before applying the hack below: Power on your player whilst pressing hold both the Play and Stop buttons on the front player After a short while you should be presented with a set of language options.
appropriate for Region 1 use 2, 9, 3, 3 and 4 for Region 2 use 3, 8, 7, 6 and 7 for Region 3 use 5, 6, 7, 3 and 2 for Region 4 use 7, 6, 8, 8 and 4 for Region 5 use 5, 3, 8, 1 and 4 for Region 6 use 2, 4, 4, 6 and 2 A code should be displayed on the screen indicating the current Region setting of your unit. Press the 9 button on your remote control for Region free, or 1 – 6. Press the Open button on your player. Press the Standby button on your remote control if the player sticks on FBI Warning screens.
Press "9" on the remote "9" will appear on the screen (9 is region free) Press "open/close" on the DVD player Press "Standby" on the remote. Thomson DTH-7000E Open tray Highlight Options in the Set-up menu Then key in 8, 2, 1, 3, 9 Then 'OK'. Thomson DVD-430T No disc, close tray Press MENU,1,6,7 on remote Player will ask you to enter region number Press 1-6 for specific region selection or MUTE for multi-region Turn the player off.
Tokai 823 Press setup Press 3 8 8 8 3 Select Bypass for all regions. Tokai DVD-715 Changing region on this machine: Switch it on Press Setup Press Slow Press Skip left Press Skip right Use the Right Arrow button to select the desired region: A = Region 1, B = Region 2, C = Region 3, D = Region 4 E = Region 5, F = Region 6 Toshiba SD-43HT 1- TURN ON THE DVD PLAYER WITHOUT ANY DISC. 2- PRESS ENTER. 3- PRESS 8-4-2-6-9 4- PRESS ENTER 5- TURN OFF THE PLAYER 6- TURN ON AGAIN THE PLAYER AND THAT´S IT.
The same hack that works with many other Toshibas applies to this as well. Cut-and-pasted: To see firmware information, turn the player on with the remote. Press Zoom, 6, 0, 6, Zoom. Information, albeit somewhat cryptic information, is displayed. Zoom, 1, 0, 2, Zoom attempts to upgrade the firmware. Toshiba SD2900-SD220E-SD2950 Let me describe what I've done: 1. Download the RAR file (linked provided by Faisal. http://www.geocities.com/its_yahell/sd220e.rar 2. Unpack RAR file using for example Win-Rar.
Press the Enter button on your remote to change the onscreen display until it indicates 1 for Region 1, 2 for Region 2, and so on, or All for multi-region playback Press the Open/Close button. U Umax DVD-2100 Make sure player is on with no disc in tray Press Open/Close Zoom A-B Up Left Down Right. Umax DVD-6400 Press Eject to open Disc tray Enter code '7777' Press select repeatedly until '9' appears on screen Validate by pressing 'Play' Your player should now be region free United DVD 1151 Power "on".
Make sure you don’t have any DVD inserted and Door Closed. With the remote control: press SETUP, NEXT, STOP, PAUSE/STEP, press PREV, press NEXT. United DVD 3052 Open the player's tray Enter 3308 on the remote control (you should see XXXX on the top left of the screen Enter the region code as follows (you should see the region number instead of XXXX) 1 for U.S.
The above will also work on: Goodmans DVD3600PKT Grundig GCV720HT Universum DR1020 Palladium STS-25 Schneider SHC-201 (Same as above – 3161) United DVH 3160 Turn the machine on and open up the DVD tray. Using the remote control press 9817 or 3838, and the magic menu appears. Change the region to whatever you want or set it to 9, which is Multiregion press the "ent" button until it matches your choice. You can also alter macrovision from this menu.
Voxson DVD330 Turn the player on. Using the remote control, key in the following: Setup, Next, Stop, Pause, Prev, Next. You should now be in a hidden menu. Using the remote control, press Arrow button to the REGION ID. Press Arrow Up and Arrow Down to change region from VER1 to VER6 or select BYPASS for region free. Press Select, then Setup on the remote control. Insert the DVD into the player tray and then press Play.
Press “Enter” Button. Waitec DVD X51s Press Setup Next Prev Next Prev Screen shows Ver 2 Press left arrow key till screen changes to Ver 255 Press Setup. Wharfedale DVD-750 Open the DVD players tray. Place a Region 1 disc in the tray, but don't close it. Press the buttons 0, 1, 2 and then 3 on your remote control in order, one at a time. Press the play button on either your remote or the player. To change the player back to Region 2 only functionality: Open the DVD players tray.
Then Next from the Remote Control You should get a new menu titled, FACTORY SETUP From there you can pre-select region (for RCE disks) and disable Macrovision X XMS 750, 250, 950 To change the player Region code follow the below steps: Open the players draw Key in using the Remote 8926 followed by the Region code your require, i.e. 1 for Region 1 etc. Keying in 0 sets the player to Region free mode and reportedly disable Macrovision Xwave LB 900 Power on the DVD without any CD inside.
Y Yamaha DVD S1500 1/ Power ON 2/ Press PLAY 3/ 2 7 4 4/ 222222005255 5/ Play (Watch for display on screen) Yamada DVD-2500 Switch on the DVD player and press the eject button Using the remote control, press the "setup" button to display the setup menu Press the right arrow key four times to highlight the preference page Enter on the remote control "1379"--this will display the current region code setting (default is region 2). Press the up and down arrows to choose your region setting.
Press "SETUP" Goto "PREFERENCE SETUP" Press "1379" Current region code will be displayed Press "UP" or "DOWN" keys to select region code Press "PLAY" to confirm Press "SETUP" again. Yamakawa 215, Yamakawa 255 In SETUP enter: "13698888" Then the field called "VERSION" will appear Move Cursor on VERSION and open with PLAY button Use Cursor/Play button to go to Region Code and enter desired region Then go back to SETUP to save.
Switch it on Press Setup Press Slow Press Skip left Press Skip right Use the Right Arrow button to select the desired region: Yamakawa DVD-780 Set Region: SETUP, LOW, SKIP-RIGHT Region Free: Setup, Slow, Skip-links, Pause Yamakawa DVD-820 Set Region: SETUP, LOW, SKIP-RIGHT Region Free: Setup, Slow, Skip-links, Pause Yamakawa DVD-860 Set Region: SETUP, LOW, SKIP-RIGHT Region Free: Setup, Slow, Skip-links, Pause Yello DVD-800 Turn the player on Press Eject. Then Setup Then Mute.
Yukai V300 Ensure the players tray is empty and closed On the Remote control: Press SETUP On the players Front Panel: Press NEXT Press STOP Press PAUSE/STEP Press PREV Press NEXT. You should now see a new MENU. Go to Select Region Yukai DVD-520 Power up DVD without a disk Press setup on the remote On the player press next,prev,next,prev. Region code should be displayed on top right corner of screen. Use the keys on the remote to: Use left/right arrow keys to change region code to 255. Press down arrow.
Good luck guys! http://www.videohelp.com/dvdhacks.php?select=Zenith+DVB312 Zenith DVB 412 VCD and SVCD playback enable for the DVB-412 Basically the same hack used for the DVB-312 works, with a few notes. 1. Power up unit with no disk in the tray 2. After "no disc" shows on the front display, press PAUSE on the remote 3. Press in order: 1, 4, 7, 2 on the remote (short keypresses). A new screen will show up, EEPROM settings with a green background 4.
Microcom ver: V1.50A MP PROM: 55 53 00 45 02 55 64 FF Factory reset... done... (the PROM I listed above is before the VCD/SVCD hack) Zenith DVC-2200 Multi Region Hack. Power on the player with no disk in the drive Press PAUSE on the Remote. Enter 3, 1, 4, 1, 5, 9 on the Remote (the word COdE appears on the display). Enter 0 on the Remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.). Press PAUSE on the Remote. Power the player off and then back on. Zenith DVC-2201 Multi Region Hack.
1. power the player 2. press "PAUSE" 3. enter "314159" 4. press "0" (0=all regions, 1=region 1, 2=region 2, etc) 5. press "pause" 6. turn reciever off and then on again.
3) Using a CD burning program, burn the RMTM0000 directory to a CDR, making sure to use the ISO9660 file system instead of the default Joliet. Finalize the disc. 3) Turn on the player and insert the disc. The Region Test Menu screen should appear. 4) On the remote, press your desired region (or 0 for regionfree), then press Pause. 5) Eject the CDR and turn the player off. 6) Turn the player back on and enjoy. NOTES: a) I did not need to wait a minute between region selection and pause.