Specifications

Yukai DVD-V300
Code 1
Ensure the players tray is empty and closed
On the Remote control:
Press SETUP
On the players Front Panel:
Press NEXT
Press STOP
Press PAUSE/STEP
Press PREV
Press NEXT
You should now see a new MENU. Go to Select Region
Code 2
This is the same hack as Mustek DVD V300 because the players are the same.
Yukai V520
Ensure the players tray is empty and closed
On the Remote control:
Press SETUP
On the players Front Panel:
Press NEXT
Press STOP
Press PAUSE/STEP
Press PREV
Press NEXT
You should now see a new MENU. Go to Select
Yukai DVD-V560
Power up DVD without a disk. Press set-up on the remote. On the player press
next,prev,next,prev. Region code should be displayed on top right corner of screen. Use the
keys on the remote to: Use left/right arrow keys to change region code to 255. Press down
arrow. 3001 should be displayed. Use left/right arrow to change to 3000. Press down arrow.
4001 should be displayed. Use left/right arrow to change to 4000.
Yukai V520
Power on the unit and using the remote press 'Setup', 'Next', 'Previous', 'Next' and 'Previous'.
A service menu should then appear with a 'Region ID' option indicated. Using the arrow keys
set to '255'. Press the 'Setup' button on the remote.
Zenith DVC2200, Zenith DVC2550, Zenith DVD2201, Zenith DVD2381,
Zenith DVD5201, Zenith IQDVC2350, Zenix Z-2001
Code 1
Power on the player with no disk in the drive. Press "PAUSE" on the remote. Enter "3 1 4 1 5
9" on the remote (the word COdE appears on the display). Enter "0" on the remote (0 = All
Regions, 1 = Region 1, 2 = Region 2, etc.) . Press "PAUSE" on the remote. Power the player off
and then back on
To play any region disc in these players shown below simply follow these instructions
Open the tray, place an R1 disc on it but don't close it.