Specifications

Code 1
Press "open tray" then Press "33080" for multizone or "33081" for region 1 or "33083" for
region 3 etc. press "close tray"
Code 2
To change the player Region code follow the below steps:
Open the players draw
Key in using the Remote 8926 followed by the Region code your require, i.e. 1 for Region 1 etc.
Keying in 0 sets the player to Region free mode and reportedly disable Macrovision
Xwave LB 900, Xwave LB 1000
Power on the DVD without any CD inside. Press on your remote: set-up, step, ffwd, fbwd Now
press: pause, stop, key + or key -, With the key + or key- you can change it to Region 0. Now
leave the Region to 0 for a code free DVD.
Yamaha DVD S510, Yamaha DVD S520
You'll need a One-for-All 6 remote with the code 0539. Power on the unit and then key in 085.
The player’s display should then show a series of dashes. Press 222 222 005 255 and then
'play'
Yamakawa 218, Yamakawa 713, Yamakawa 715, Yamakawa 780,
Yamakawa 820, Yamakawa 860
Code 1
Turn on player and wait for "no disk". Use remote and push the following buttons, set up,
mute, stop, zoom.
Code 2
Switch it on
Press Setup
Press Slow
Press Skip left
Press Skip right
Use the Right Arrow button to select the desired region:
Yamakawa DVD-780, 820, 860
Set Region:
SETUP, LOW, SKIP-RIGHT
Region Free:
Setup, Slow, Skip-links, Pause
Yelo 800 DVD
Press "EJECT, SETUP, MUTE, LAST, NEXT" buttons one after another and you will be given a
Factory Control Page where you should select the Region ID option. Here you should find it set
to REGION BYPASS. (Which you would normally leave it on).
Yello DVD-800
Turn the player on
Press Eject
Then Setup
Then Mute
Then Last
Then Next