Specifications

Schneider DVD-511
Converting this player to all region:
Press the Menu button on the Remote
Press the 1 button
Press the 6 button
Press the 7 button
Press the Mute button
Schneider 810
On remote, Press menu, 9, open/close, 5. Region selection page is shown Press mute
Schneider 855
Turn on DVD. Open cd drawer. Press set-up on remote. Press right button until all way across.
(Should relate to passwords. press button (3) four times. (This will bring up region select).
press right to highlight regions. now select region 0 or region wanted!. press enter. close CD.
drawer.
Schneider HCS 500
Code 1
Open disc tray. Press and hold "Volume up" Key. Press "Fast Forward". On the display appears
the combinaton:0->2->3->4->5->6->0. Press now "Fast Forward" to change the last digit
according to the new region code. Now press "Angel" longer then 2 seconds to save the new
region code.
Code 2
Open the players drawer
Press Volume Up on your Remote
Press Fast Forward on your Remote
The on screen display will show 321 followed by the current Region code
Press Volume Up on your Remote
Press Fast Forward on your Remote
Repeat steps 5 and 6 until the desired Region code is shown on the display
Press and hold the Angle button on the Remote for approximately five seconds to select the
Region
Scott DVD 838
Setup, Mute, Last, Next on the RC. Select the right region
SEG Beverly Hills, SEG DVD 2211, SEG Las Vegas, SEG Los Angeles
Press "Menu" "7" "4" "2" "0" after this you'll see the player hardware and software set-up in
this Menu you have to press "9" "0" after this your player is region free.
SEG DVD-2000
Setup / Slow / Skip Left / Skip Right
This allows you to change the Region Code of the machine, "*" is Region Free.
Sharp DV-550
To access the hidden menu on this player follow these steps:
Press STOP
Press SETUP
Press STILL/STEP