Specifications

Then input the number of the zone you want.
Playstation 2 (Jap)
Code 1:
Press & Hold the Circle, Right and L1 keys.
Code 2:
Press & Hold L3 & push the stick in hard
Code 3:
Boot into PS2 browser without a CD in the tray
Insert the Region 1 DVD you want to play
Press Circle and R1 on the DVD
Hold Right until menu appears
Press Circle and R1 again
NOTE: This hack only works on the first revision of the PS2 (SCPH-10000). It does not work on
the newer SCPH-15000
Prima EP DVD650
Code 1
Turn on the DVD player, eject the drive and enter the following code: 8926. Then press the
number that corresponds to the region you want to play or press 0 for auto region. You will
know if done correctly as in the top left corner of the screen you will see the region number
appear.
Code 2
Power on the unit and open the DVD door by pressing
the "Open" button on the front panel
Use Remote Control to enter the following numbers 3, 3, 0, 8, 8
You will see in the top left of the screen "****" appear
Key in a number corresponding to the Region you desire your player to be set to, i.e. 1 for
Region 1, 2 for Region 2 and so on, use 0 for Region free
If 3, 3, 0, 8, 8 fails try 8, 9, 2, 6
If 0 for Region free fails, try 9
Primare V10
Open disc tray. Press 9,8 and hit SELECT (you get the Service Menu), in the "region code"
insert 14. In the "macrovision" (page 2 of the menu) insert 0. Press SELECT and RETURN.
Primare V20
Open the players tray
Press 9, 8 and SELECT (this should take you into the Service Menu)
In the box "region code" insert 14
In the "Macrovision" (this is page 2 of the menu) insert 0
Press SELECT
Press RETURN
Proline DVD1000
Code 1
Place a region 1 disc in the tray, but don't close it. Press the buttons 0, 1, 2 and then 3 on your
remote control in order, one at a time. Press the play button on either your remote or the
player.
Code 2
Open the DVD players tray.
Place a Region 1 disc in the tray, but don't close it.