Specifications

With remote:- open draw, press set-up, stop, back skip, fwd skip. Now in hidden menu turn
macro off and change region to 0.
Nakamichi DVD-10S
Press power+dimmer+previous (|<) all together the display’s shows _ _ _ _ . Press in
sequence 1 9 9 9, the display shows A-0000 D-01 and Enter region code. Power off.
Nakamichi SoundSpace 10, 11 & 21
Press and hold the Track Down button on the player
Press the Power On button to turn on your player
Wait until the machine shows "----" on the display
Release the Track Down button on the player
Using the main remote keypad, enter the digits 1, 0, 1 and 1, then press Enter
The machine should now display "D-00" and be region free
NEC NDV-21
Make sure there is no Disc in the unit when you turn it on. Press pause on the remote. Press
3,1,4,1,5 and then 9 on the remote. Press the number for the required region(0 = all), Press
pause. Turn the unit off then back on.
Neufunk DT-2000
Press: stop stop setup slow |<< pause stop play play. This will let you turn macrovision off for
firmware 5.3E Press: stop stop setup slow |<< and use left or right arrow to change the region
code of DVD, or select * for all regions.
Nintaus n9901
This player is already free from region and macrovision BUT you maybe want to change the
region code in the future. So Open the lid, put in the numbers (with the remote) 9,9,2,6 one
in a row after each other. (You will see X signs for each number on the screen). Choose region
(0 is region-free).
Noriko DVD-390K
Open the disc tray
Insert an RCE title and close the disc tray
A screen will be displayed stating your unit is of the wrong region
Press the Access button on the Remote Control
Press the Goto button
Enter the title of the main feature, usually 01
Press the Play button on the Remote Control
Olidata 1999-E
Press set-up and go down until the preferences menu, Press step, back, next. Now you will
have a menu where you can change the region code or set it to bypass, activate or deactivate
the Macrovision and other functions.
Omni SLP2000KD
Power ON the DVD player. Push the OPEN/CLOSE button on the remote or front panel - the
tray will open. With the tray still open, enter "2168" on the remote, followed by the region
code.