Specifications

If you get an "invalid region" message on screen simply open up the DVD drawer an press 1 1

1 1 followed by the required region

Press the Open/Close button on your remote control, A-B, Up, Left, Down, Right. Region free

should flash up.

Lasonic DVD-2100

Open disc tray and leave it open. Press set-up, press Vol.+ then Vol.-, Press Vol.+ then Vol.-

again. Top right hand corner will appear reg.1 and use the blue arrow on the remote to choose

which region you want or select ver.255=meaning all region. After selecting press set-up and

it'll work.

Lasonic DVD-3200

Press Eject leave tray open.

Press 1, 1, 1 and 1 followed by the region number you want.

Close tray and play the movie.

Lasonic DVD-8050

Open tray. Key in 1111 and the region you want to watch (only does 0 to 4), 11110 auto

selects the region.

Lecson DVD-900

Code 1

Press on/standby on front panel of DVD player, then on the remote press the following;

open/close zoom a/b up left

down right

Code 2

Press the Open/Close button on the Remote Control

Press the Zoom button, Press the A-B button

Press the Up button, Press the Left button

Press the Down button, Press the Right button

The words Region Free should briefly appear on screen confirming that your player is now

region free

Lenco DVD-02

Put on the DVD open the tray. Type in the code 330880 after every number you have to wait

until the hand disappears. Now your player is region and macrovision free.

Lenco 202 enter set-up and press 167 on remote. This brings up the region menu, enter the

digit from 1 to 6 of the region required.

Lenoxx DVD2003

DVD on with No disc, Press SETUP NEXT PREV NEXT PREV with remote. You'll see "VER 1" on

the upper left corner. With LEFT and RIGHT you can change the value. Change it to 255

(Region Free).

Lenoxx DVD9000

Open the DVD tray, press the code 9653 on the remote. If you see 00 in the top right corner

of the monitor, it means it is region free. If you now select 01,02,03,04,05 or 06 it will select

a region manually.