Specifications

"MENU" button on unit for over 4 seconds, while holding pressed that key, do the same with

"TOP MENU" (now you have two buttons pressed) and finally do so with "OSD" / power button

, hold then for at least 3 seconds and “FACTORY” should appear on the display. (you have to

follow the sequence keeping pressed all previous keys) Turn on the unit In order to put it back

to normal, use "F SKIP" instead of "MENU", "B SKIP" instead of "TOP MENU" and "POWER"

instead of "OSD". "All Clear" should appear on display.

Aiwa XD-DV370

Code 1;

Press the Pause button on your remote control. Using your remote control enter the code 3, 1,

4, 1, 5 and 9. Press the 0 button on your remote control for Region free, 1 for Region 1 or 2 for

Region 2. Press the Pause button on your remote control. Power off your player and wait a few

seconds. Power on your player

Code 2;

Power on the player with no disc inserted, and wait for the "No Disc" message on screen. Using

the remote Press PAUSE and then Press the numbers 314159 in order. Press the number of the

region you desire. Press PAUSE. Power off the player for a few seconds and power back up and

insert your DVD disc!

Aiwa XD-DV480

Code 1;

Power on player with no disc inserted and wait for "No Disc" message on screen. Using the

remote Press PAUSE and then Press the numbers 314159 in order. Press the number of the

region you desire. Press PAUSE. Power off the player for a few seconds and power back up and

insert your DVD disc!

Code 2;

Same as above, but put 3412292 as the code.

Code 3; same as above, but put 8926 as the code.

Code 4;

Same as above, but put 342292 as the code.

Aiwa XD-DW1

Turn on player, Insert any disc. Open the lid, take out disc and close the lid. Immediately press

[Stop] and wait few seconds. Press 8,7,1,0 and then >> on remote. The player should be

region free now!

Aiwa XD-DW5

Code 1;

Turn on player, Insert any disc. Open the lid and take out the disc and close the lid.

Immediately press [Stop], wait few seconds. Press 8,7,X,0 (where x is the region code, e.g.

–1) and then >> on remote. The player should be region free now!

Code 2;

Turn on player, Insert any disc. Open the lid, take out disc and close the lid. Immediately press

[Stop] and wait few seconds. Press 8,7,2,0 and then >> on remote. The player should be

region free now!

Code 3;

Same as above, but use the code 8,7,1,0

Aiwa XD-DW7

Use same codes as the DW5 and DW1

Aiwa XR-DV370KN