Specifications

Power on your player whilst pressing both the Play and Stop buttons on the front player
After a short while you should be presented with a set of language options. Release the Play
and Stop buttons on the player
You will now need to select a language option between 1 and 6
To convert this player to Multi-Region playback:
Press the Repeat button on the Remote Control
Using the Remote enter the code below, note that you must know what Region your player is
currently set to in order to know which code is appropriate
For Region 1 use 2, 9, 3, 3 and 4, For Region 2 use 3, 8, 7, 6 and 7
For Region 3 use 5, 6, 7, 3 and 2, For Region 4 use 7, 6, 8, 8 and 4
For Region 5 use 5, 3, 8, 1 and 4, For Region 6 use 2, 4, 4, 6 and 2
Press the 9 button on the Remote Control for Region free, or 1 for Region 1, 2 for Region 2 etc.
Press the Open button on your player; Press the Standby button on the Remote Control
Hitachi HTD-K150
Open the DVD player CD Tray
Press Volume Up on your Remote
Press Fast Forward on your Remote
The on screen display will show 321 followed by the current Region code
Press Volume Up on your Remote
Press Fast Forward on your Remote
Repeat steps 5 and 6 until the desired Region code is shown on the display
Press and hold the Angle button on the Remote for approximately five seconds to select the
Region
Hiteker AD-600A
Press the Set-up button on your remote control.
Using the onscreen menu, select the Preferences option.
Press the Still/Step button on your remote control.
Press the Prev button on your remote control.
Press the Next button on your remote control.
You will now enter the hidden set-up page, and can change the player to any Region or set it
to Region Free.
Hiteker BI-600
Turn unit on (on the remote) do the following. Press set-up. Press stop. Press skip left. Press
skip right. The hidden menu will appear select regions and choose bypass. Its now region free,
you can also shut off macrovision.
Hiteker HE-1120
Turn on player; make sure there’s no disk inside! Press set-up, press stop, press skip left |<<
, press skip right |>> now you are in factory settings screen you see: Version: (my
player):V25J01131 region ID (standard on region 2) CSS (for new protection disks?)Standard
auto (on) Macrovision (standard auto)(on) Automute Dither now go with remote on region
(blue buttons on remote), press right and choose "bypass" confirm with enter! Macrovision
same deal set to "off" confirm with enter (play).
Hiteker HE-1200
Same as above
Hoyo 8050D