Specifications

Haus H-2001-S
(Press "STOP" twice. Press "SETUP". Press "VOL+ & VOL-" repeat the sequence twice in quick
secession (+,-,+,-). the TV screen will display "VER #" Press left/right cursor keys to change
the # -(1,2,3,4,5,6 for desired Zone Code) For All Code -Press 255. Press "SETUP" . The
system Zone setting is then completed.
Haus H-615L-S 5.1
At Logo screen, press [STOP] key. Input the digit number in the sequence [2,3,1,7]. Then
input the region code, 0 for all, Power off the DVD player . New region code settings will be
activated when the DVD is powered on again
Or
(Press, "STOP" twice. Press "1999" The TV screen will show a hidden set-up screen. Select
"REGION CODE'. And Press, "ENTER" to select desired region code "1 to 6" or "All" of All Code.
1.Press "STOP" button twice 2.Press number button sequence "7","9","2","8" and "1" to turn
OFF Macrovision protection disabled (video friendly)
or 3.Press number button sequence "7","9","2","8" and "0" to turn ON Macrovision protection
enabled (not video friendly)
Himage 2290
To make this player multi-region, turn on the player and open the DVD draw. Type 8 8 0 0
using the remote control and then select the relevant region, e.g. 1, 2, 3 etc and 9 for region
free. By setting the player to 9 it will play all DVD’s including the recently added Region Coding
Enhanced DVD’s.
Himage DVD-8800
Press the Open button on the Remote Control to open the drive tray
Press the buttons 8, 8, 0 and 0, on the Remote Control
Now press 1 for Region 1, 2 for Region 2, etc, or 9 for Region Free
Press the Open button on the Remote to close the drive tray
Hitachi DV-P250E
Power on your player whilst pressing both the Play and Stop buttons on the front player
After a short while you should be presented with a set of language options. Release the Play
and Stop buttons on the player
You will now need to select a language option between 1 and 6
To convert this player to Multi-Region playback:
Press the Repeat button on the Remote Control
Using the Remote enter the code below, note that you must know what Region your player is
currently set to in order to know which code is appropriate
For Region 1 use 2, 9, 3, 3 and 4, For Region 2 use 3, 8, 7, 6 and 7
For Region 3 use 5, 6, 7, 3 and 2, For Region 4 use 7, 6, 8, 8 and 4
For Region 5 use 5, 3, 8, 1 and 4, For Region 6 use 2, 4, 4, 6 and 2
Press the 9 button on the Remote Control for Region free, or 1 for Region 1, 2 for Region 2 etc.
Press the Open button on your player; Press the Standby button on the Remote Control
Hitachi DV-P305E
Power on your player whilst pressing both the Play and Stop buttons on the front player
After a short while you should be presented with a set of language options. Release the Play
and Stop buttons on the player